Відео

Most likely gasket. I usually do most testing in gasket, unless specified 🫡

@@Akeynote Oh ok. I seemed like the carbon fiber plate was the bounciest in the video, but when I tried the carbon fiber plate it seems stiffer. I'll try it again without foam tho since that's how you had it.

I use a mkh416 mounted about 12 inches from the keyboard. Plugged into a zoom F3 recorded in 32 bit float.

It was all the same switch, oil king, the foams and stuff were strategically removed or put in. I let the switch foam in the enter and most iso enters are pretty deep like this.

Oil kings

Thanks for always coming through bro!

IV Ashes

You tried the rubber thingies without foam? That helped a lot for my no foam config.

@@Akeynote I used the little tadpoles. Without the foam, the sounds wasn't as loud as I like. I used Clackbits switches, which sounded better with foam. I'm guessing that a louder switch may have been fine without foam.

Sorry I was on a vacay lol. Depends on the sound and feel you’re going for. Hopefully you got a good one.

Best clack? I ended up getting fr4 and cF

Thanks!!

There is about 6-8 seconds of silence after each explanation. Thats about the same amount of time other creators leave for soundtests. Would it be any different/better if I explained without the typing in the background, then played the 6-8 seconds of typing after? I’ll try and figure out other ways to do this.

I didn’t say it’s a skip lol

@@Akeynote oh? Im just going off the title of your video. i guess i interpreted it completely wrong lol.

@0xBULLgogi clickbait my friend 👍🏽

@@Akeynote well shiiiiiii

lol it didn’t flop and they didn’t have to release the classic. They saw an opportunity to make more money with less materials. Win win 👍🏽.

Yeah. You can check out any of the previous qk stuff I have on the channel. Qk60 75 and 100 has all the plates. Pc always sounds highest to me

@@AkeynoteI see, thank you. It’s quite the opposite of what I learned from other tubers, literally the order reversed. But I’ll check out your other videos, thx again.

@kyle1152 it depends on the board but usually this rings true for me. Subjectively, less dense materials absorb lower frequencies and denser materials absorb higher frequencies better. 🫰

@@Akeynote i agree with this general correlation but isn't it more applicable to foams/cushioning than to plates/supporting or direct contacting bodies? I thought plates in keyboards play a bigger role in sound wave emission/creation than absorption/cancelation.

@@kyle1152sorry didn’t see this comment. sound source comes from the switch though not the plate. The Plates themselves don’t emit the frequency, the frequency travels through them. I’m not going to sit here and act like I did any testing on that and neither has anyone else. I know keybored has some paper math of this but he doesn’t even test the pc plate in that video. Here’s an old clip were I tested all the plates with no foam on the qk60 and you can decide. Wear headphones to really be able to hear the difference. The pc definitely sounds higher than the rest. No CF on this unfortunately. Also, my qk75 vid has the plate comparisons too and the order still seems the same to me. It all subjective though, cheers! 😊 ua-cam.com/users/clipUgkxPu2l9AohkIKl1xjFQXDYNzSqm_psCxui?si=qiA0Y_zTIWpWJ_Nz

Yeah just hit fn 1,2 or 3 for whatever is in wireless then fn q to toggle between win mac

I believe oil kings?

Yes there is a little led behind the caps lock button

Why shank you

You nice vid!

I think Neo 80. It sounds a little more crisp. IMO the cycle is a deeper sounding board which I’ve grown out of a little bit

Hahaha it’s our kryptonite

You nice vid lol

In honesty it’s not worth 2.5x IMO. It’s amazing and is super premium but at some point there is diminishing returns. Unfortunately in order to get something this premium it always comes at a premium cost.

Sup yo!! Thanks again always showing the love!

Heat comment!!! I appreciate you!

Thanks jr 🍆

Shhhh

🤐@@Akeynote

Thanks for watching I really appreciate the comment!!!

I just ordered mine a a Raffle winner. I also have a NEO80. So I will soon know if I have buyers remorse or not.

If you have buyers remorse someone will buy it off you 100% lol

Thanks bro! I always appreciate you. It’s weird people have told me that also but pc sounds so high for me lol

@@Akeynotehaha, totally fair! I’ve been experimenting with different plates in my bakeneko for years since 60% plates are so easy to buy (and relatively cheap), and I admit the standard convention doesn’t always hold. My broken in / lightly lubed MX Blacks sounded somewhat shockingly brighter on PC than PP and Alu, which admittedly was not as expected! I feel like as I’ve tried to stop chasing a very specific sound for my builds, I can just sort of sit back and appreciate the nuances between different switches / plates / boards without being disappointed I can’t get it to sound some exact way.

very normal for owlab boards

I definitely like the look of the qk80 but this types nicer. Sound is subjective

Quality is the same, and I like typing on the 80 more but I don’t like TKL.

No PE foam in this

If you could afford this I would get this. It’s deeper than the neo65. I’m not really a switch connoisseur, check out maker keebs for that. The deepest switch I’ve ever used were durock lavenders, but gotta lube and film those

@@Akeynote Ah, k

Yeah I would look into Neo studios. I have a few reviews of their boards on the channel right now. Around the same price as the nj80 and gmk67, but much higher quality. Check out the neo65. I constantly rotate boards so right now I’m on the qK65v2

Oooh thanks for the advice! Checking it out right now.@@Akeynote

Haha,i would buy the neo65 cause the keyboard sale is up right now but i dont got the money atm lol.@@Akeynote

Google 2U x 2U keycap. Mines from Kiser designs

I’m not a 80 guy myself! No judgement

Can’t remember these are so old. They were from akko