Making my own virtual pinball machine - Part 2 - Inside hardware and working tables!
Вставка
- Опубліковано 21 лип 2022
- Links to all the stuff I used to make this:
Power strip - amzn.to/3b4RwpP
Audio cables - amzn.to/3IW8weA
USB ports: amzn.to/3RUh1uD
7.1 Surround sound amp - amzn.to/3Ps2HYL
SSF speakers - amzn.to/3IWnjFW
SSF Amps - amzn.to/3PIflCy
Terminal block - amzn.to/3omWgKB
Temp control board - amzn.to/3J5tOGD
Fans - amzn.to/3vc8UzR
My IG page: / maxharvard
Check out the 3 books I've written!
4L80E Rebuilds - amzn.to/3hVsjOS
LT1 Performance book: amzn.to/2Fuip2n
LS Swap book: amzn.to/2BPv0NJ - Авто та транспорт
Looks great! Just finishing up the cabinetry on mine. Fun as hell project, lots of things to focus on!
Absolutely! I'm a cabinet maker, so that part was easy, the computer part... not so much LOL
Looks great nice job man :)
Thanks! :)
Great work im going to build my own soon but with limited space so will be either 32 inch monitor with 27 inch back glass and i have a 24 inch Monitor already for the dmd and video
Which software do you use to switch between tables, the selection overlay?
pinup popper
Where do you get the software to run the tables on your build?
look up pinuppopper
Great work. Looks like your pinball machine is moving right along. It looks great man. I should post a video of my build. It's so fun to put together such a project isn't it?
Sure is! I'm working on glass and artwork now.
Great work. Need to get working on mine again soon. What monitor is that?
Never mind saw it’s a tcl
@@joewozniak2231 all good, it was a budget TCL. but still 4k UHD
How did you do the tables .I have vp9 full-screen tables and back glass .I tried vpx tables bit had no luck. Nice table
baller installer helps a lot, but yes all of these are VPX10
hello and congratulations. Do you have a project from which you can obtain the measurements of the furniture? Thank you
Yes, check out Mjrnet's guide. works great
@@GearheadDaily thanks for the quick reply. But where can I find the Mjrnet guide?
@@nicolapontillo2029 Google?
mjrnet.org/pinscape/
Did you build this yourself? I saw part one of it being built. If so, do you build for others? I want to get a custom wide body Vpin but not sure where to go about it. Thanks.
I did yes and i'm building a second right now. I will make them for people near me.
@@GearheadDaily Awesome. Not sure where you’re located but I’m in TX. I’ll pay shipping. Lol 🤣. Love your work. It’s amazing
@@ProJecT335i lol thanks, but i try not to ship stuff. Once it leaves my shop i don't want to have to do customer service LOL
I'm in MN btw.
Awesome video. You did an awesome job. You mentioned it runs in 4k. Do you mind me asking what cpu and gpu did you use? Also, what type of TV did you use for the main table? Any light you could provide would be greatly appreciated.
I don't remember the CPU, I7 i believe, but the gpu was a 980ti. The TV was a TCL 4k TV from walmart. My newest build has 4k 120hz and a 3070
@@GearheadDaily Awesome! Can't wait to see your new build.
@@stuartsherman5975 Thanks, i'm about to make a walk around of it later today :)
Hi. What size monitor??
And for the backbox?
I can't remember, but 43" works fine, back box is 32"
Would Windows 11 run the software without issues?
I've heard that it works fine, but some have issues. I'm keeping 10 for now
@@GearheadDaily Ok, thanks.
Where have you been?
Hey bud! recently i took a new job and haven't had a lot of time for much else really. Now that I'm getting the hang of the new gig I can breath a little bit and have some fun :)
@@GearheadDaily Happy to have you back. Nice machine by the way.
@@guitarobot Thank you sir! I've got lots going on, just haven't posted anything about it! :D