Chrysler 200 2016 (How to bleed brakes DIY)
Вставка
- Опубліковано 13 кві 2022
- In this video i will be showing you how to bleed your brake with a bleed pump. In this video I am doing the passenger side tire in the front because i serviced the back passenger side then back driver side.
EACH VALVE IS LOCATED ON THE CALIPERS AND THE BACK TIRES ARE A BIT MORE DIFFICULT TO REACH BUT WITH THE OFFSET WRENCH IT WILL BE SIMPLE.
THE NUT ON THE CALIPER FOR THE BACK IS A 11MM
THE NUT ON THE FRONT CALIPER FOR IS 10MM.
Once the wrench is on the bolt, putthe tube onto the valve and start pumping for pressure to build .
Then you will open the nut slowly and bleed the brakes.
Once the pressure is done close the nut and repeat the process until the fluid comes clear.
While repeating the bleed ......YOU MUST KEEP AN EYE ON THE MASTER RESEVIOR.........
If you don't keep an eye and it gets empty air will enter your lines and that will be a bigger problem when braking.
QUESTIONS?? COMMENT BELOW. CHECK OUT MY OTHER VIDEOS FOR THIS CAR IF YOU WANT MORE DIY
If you found my video helpful support my music 😌 search Spaderj on Google and hear my music on many platforms!!!
open.spotify.com/artist/1IU90... - Ігри
Hello,
Question: There’s no need to have the car on the brake service mode setting while bleeding the system; right? I just want to make sure. I just replaced the calipers and apparently, since one of the pistons was broken, the caliper loss fluid; there’s air in the lines.
No. Brake service is to take care of the brakes. It makes a winding sound but it just losens something to make the rotor and brake replacement easier.
The nipple for the bleeder is on caliper. Having air in your line will give you a squishy pedal. If it gets worse I recommend taking it to a mechanic and let them know so your line doesn't burst from the pressure
Where can I buy the device?
I got this specific one at autozone. You can also have a look in advance auto. Most auto stores should have something similar.
Did you start in rear or front brakes?
On the passenger side rear then driver side rear then the passenger side front then driver side front.
@@Spader-J you’re the best appreciate it.