2019 Mustang Week to Wicked FULL EPISODE-1990 Fox Body Mustang
Вставка
- Опубліковано 26 гру 2019
- Full week build! This week was the fourth Week To Wicked project for the Mustang group in our Santa Ana Tech Center, and this time we turned the wrenches on a 1990 Mustang LX hatchback. #Mustang #WeekToWicked #Ford
- Авто та транспорт
on behalf of all Ford fans i want to say thank you for not LS swapping it! :-)
Oh my Lord, I can't tell you how happy I was to see that they stuck with the 302 based powerplant. I am so sick of seeing Fox bodies with a LS...it just gets old to open the hood and see a Chevy engine under the hood of a Ford.
You're welcome ma'am
There's only One Swap and that's the Coyote Swap! Long live the Foxbody
@@Brock_Landers I’m assuming you have a foxbody? I have a coupe with a little LS in it and would love to line up with you sometime. I have a couple videos of it on here
Don’t get car guys having problems with LS swaps in anything or 9” rear end in anything or a 5.9 Cummins in anything! Leave your feelings at the garage door and get to work on your project!
I actually watched the full 43 minutes with out pressing the forward button. Good
Stuff guys
I have never watched a 42min UA-cam clip, but this was outstanding. I have a 91 Stang LX 5.0 Covert that I want to restore, and this gave me outstanding ideas. Great job!
Same reason I watched.. i have a '92 LX 5.0 vert, may car was orginally an H.O. car but some b.s. happened before i ended up with it, im looking to restore! What motor you going with?... im actually praying i can luck into a coyote or the money lands into my bank somehow lol
Thanks for using the push rod engine... it sounds like it should on this car!
The paint and body work on that car is amazing.
Absolutely beautiful car!
You're not lying. Makes me want to buy one.
I agree
All these clean handed mechanic’s doing so much work so quickly! WOW
But boy does that look good!
That is the nuttiest rear end setup I've ever seen in a fox.
It’s actually the best fix on the market for the poorly designed stock suspension.
Torque arm. The secret weapon. Traction increase under throttle leaving corners and launch at higher RPMs.
Did I see them ripping out the 8.8 in the beginning of the video?
Automatic? Stab me in the heart. Seriously, this should be an amazing daily driver. Maximum Motorsports is the best in the industry, period.
Griggs Racing sla/watts link
Automatic would make an amazing autocross car, drag car or cruising machine, being able to lock in the gear shift in a flash with no drive train snap...........Manual is a nice driving experience, but far from efficient these days with today's technology. Manual is great for a street car to have fun, but garbage on a track when efficiency and fractions of a second matter.
F1 drivers shift their gears manually (without a manual clutch but still) and they are the best drivers in the world.
The main shop owner dude lame af and his assistant is doing most of the legit work props to him.
I wish I could get paid to watch UA-cam videos for a living cuz I love watching this typea stuff!!
Call me crazy but that was always my favorite Mustang. Fox body 5.0 from 87 to 93, being a teenager of the 80s that was the one to have, light and fast off the line.
Don’t get me wrong I love the fox bodies I have a 93 Cobra and a 92 LX convertible, They both have a Vortech Supercharger and some other goodies! But you have to give props to Buick for building the Grand National!
I love fox body mustangs
He couldnt figure out how to remove the headers by lifting the engine, so he destroys them with a sawzall. Wow. Id love to see his resume.
Glad I wasn't the only one yelling at the screen to "loosen the motor mounts and get another floor jack, you jackass!" And they're even doing a K member swap. Embarrassing.
Sledge to the tie-rod was another. They're in a full shop, surely they have a separator tool...
Later what they didn’t show was them taking it out to do a burnout, and running it into a crowd of people.
Lots of cringy moments. Glad I wasn't the only one either. Dumb af!
Man im so glad im not the only one that wants to punch him in the face for that lol
that car is sharp. love maximum motorsports products
You guys need some Milwaukee impacts
Awesome Fox! The color looks like my 18's Crimson, very nice!
Must be nice to have a full shop and unlimited budget...
I would have let you guys put this stuff on my notch for “testing” I’m close to Santa Ana 🤣 and it’s a 5 speed! #Savethemanuals!
Did you not watch the video they are a bunch of hacks! I would not let them put air in my tires!
you really gonna let them touch your car, when they cant figure out how to lift an engine to drop out headers...
OR pull a steering shaft....
@@SleezyRaidz I have an update I’m actually doing a coyote swap on mine old engine going away.
Would love to see you guys work on a new edge 2V.
How about 2CV :P
Stop calling them new edge its a cringe name only used on UA-cam. Iv had an 03 since 05 and go to car shows all the time NOBODY CALLS THEN NEW EDGE BESIDES UA-camRS AND SHEEP LIKE YOURSELF.
Springwood Slasher it’s not that serious
Looking awesome 😱😱😱😱😱💖
Unlimited sponsors.....harbor freight Jacks lol.....beautiful car
I have always been big into gauges and not just their functions, but how they look as well, and that Dakota gauge cluster looks amazing for a Fox body. My brother just bought a set of Dakota gauges for his 74 Camaro Z28 restomod that he's building. I mean, that car looks absolutely awesome with a 383 stroker, Eaton 4 speed, 3.73 rear end, all bright white body and underneath, three painted black strips down the centerline with red, white, and blue outlines, Z28 in black on each end of the stripes, narrowed and tucked brand new bumpers, all flush cut glass with no trim or weatherstripping, Corvette paint matched Z06 door handles, lowered 2" on 18x12" wheels in the rear, 18x10" wheels in the front, black leather interior with white piping, tasteful classic chrome steering wheel, those Dakota singular gauges, and it just came out amazing. It looks like a totally different car from when we both worked on it and did a frame off restoration back in 1992.
That sounds like a sweetness car, does he have a youtube channel?
Audience, great job!!!. If you guys need a project car I can have my super clean 93 Fox shipped to You and take your time with it✌🏾.
Well Done Fellas
Nice build Mark!!!
Awesome work and it look good to get one for my fox
Nice Mustang. Looks a little like my '88 GT.
Beautiful !
nice work
Love these guys man
We need more clean videos like this of the foxbody.. we need 79 thru 86 videos
There's only One swap for any 79-93 Foxbody & that's a Coyote Swap! When you upgrade to the new coyote 5.0 only then can you put the newer 5.0 emblem on your Fox. After Coyote Swapping your Fox u can now put any decal or emblem u want on it! Put a Super Snake on it, your probably making more power to the rear wheels anyway.
Very sweet, we do old truck videos ❤️
Sam & Jaron you guys are fire🔥🔥
Sweet man
🔥
Good Job
I love the build but I could never drive it in my city. I would be left high and dry at the first pot hole with that pumpkin brace.
it is a Torque-Arm not third member brace
well made video. Thanks
15" rims with a skinny up front look the best
Coyote 5.0 in a Fox Body is taking my dream of owning another mustang GT from 87-92, & opening up limitless possibilities as far as Resurrecting my car from the past. I could start with a hatchback 4cyl car and put cobra or SVT lower valance & A F150 5.0 coyote engine block from a junkyard. Almost every coyote swap Fox I've seen are with truck engines and racing Cams
I remember when i was in high school auto shop we were lifting people from their backpack straps with one of those engine lifts
Good video! A little harsh cross threading the gas tank strap bolts though! We all seen that!Lol!
Nice build.. unlimited budget helps
My dream car
Should be a manual ...#savethemanuals
Mine is.
Agreed plus if they would’ve gone long tube headers as well
I❤4R70W
Couldnt agree more lol
Exactly.
It should be against the law to offer automatic in a performance sports car, WTF is the point.
Needs more notchback. And a t5.
How is it possible to have a car like to, that is so clean?
How many hours was used "making it ready for camera"?
But super nice car for sure.......
I m just wondering ..how much weight you put on this car with all this MM Suspension Stuff that all looks pretty heavy...??
Would liked to have seen a battery relocation. Do you really need full Mosers and frame steel for 600 to ground Vortec combo? thats a 12 sec car
What a build like this cost? Its a great video well done guys
20k in parts
@@tigererickson8375 Good thing he has a shop full of guys who work for free.
This was a well done production. Like some of the others here, I watched this video in it's entirety. Great build from the ground, up. My only two cents here, is that the battery should be mounted in the back. Which I'm sure they will do
at a later date.
That heavy boat anchor of a battery should have been a Braille battery. More than half the weight.
A fuel tank for a foxbody is only 60 bucks on ebay. Seems safe insurance for expensive fuel pump.
Awesome video guys, I kind of lost interest at the 23 mins in when I found out its an automatic though. I guess its probably super street able but half of the fun is banging gears in these things!
Sweet video I actually need all those parts y’all took off lol!
bro you dont want em, they hacked bassini headers, imagine what else they hacked
These boys are used to working on Chevys you could tell when they were lining up the trans lol
Why is it that I'm a Motor Trend subscriber but I can't find this show anywhere on the app?
What plug did you put in the speed sensor?
Just for future reference take the drive line out first, then differential.
So glad it’s a real ford engine and not one of them egregious LS engines.
Love 90 fox body
Purchased a 1993 electric red LX.5.0 new in April of 93 & 2 months later in June an old man by the name of Carter Piercy ( I'll never forget that name because when he got out of his car he rubbed his neck & said " Boy you really nailed me " ) of Kimball TN T-Boned me & totaled out my 2 month old mustang... But it turned out ok because when his insurance paid it off i purchased a new 1993 black mustang cobra ..
I'm trying my hardest to get a 87-93 Mustang GT hatchback with two toned paint. Color doesn't matter, neither does it being two tone...as long as it has a 5 spd, & of course it's a Hatchback GT. I'm getting so impatient, if I had something to start with I'd probably just Build it myself. There's a guy who can take apart a Tesla that's scrap metal and put it back together better than before, than I can build a Mustang
Is there a ruff cost estimate of how much time/labor went into this? Pretty much what I'd love to do to my fox, I just wanna go NA. Thanks guys loved this video
It would have to run around $100,000 for all the custom fabrication, and all the parts, I mean they basically stripped it down to the body! Must be nice
How much power did it make?
Want to get that mms maximum grip box for my vert fox.
Carro lindo.
What happened to the dyno results of the BRZ?
Day 4 upper intake install, you sprayed gasket sealer into the intake,won't it build up when sprayed in each plenum is it safer to spread it with you finger so nothing goes inside?
Which is worse, that or the anti-seize on the plugs?
These guys are noobs lol
I wish y'all would do this to my 1991 Mustang LX convertible with the 2.3 Liter and give it the 2.3 turbo coupe performance. I'm not hellbent on V6/V8 since I have that in my thunderbird.
I’ll take it.
What color is the paint job
i want the old parts you took off make me a deal guys
Fantastic end result, but I wonder what the total cost would be, parts AND labour and on top of the initial cars value?? Would love to know the total.
252,382 dollars 😂
any tips where i can build a car like this 1
I live near Ocala Florida and was trying to look up Spikes performance in the yellow pages but couldn’t find them. Could I get thier number please I would like to get my foxbody done
How much horsepower does it have now?
My 1987 mustang convertible 5.0 five speed has been sitting for about six years I recently just bought it I knew that it needed a little TLC so I did a major tuneup Also changed the fuel pump and now it starts up on a dime but it shakes a little bit at the beginning and then it goes away how do I eliminate the shake completely can anybody help? thank you .
What was the total cost of upgrades?
what paint is on this fox
Where to find full episodes
Do you know the color code of the paint?
No ECM tuning?
Waiting for the bank error in my favor so I can start restoring my 92’ vert.
Automatic??
What kind of rotors are those does anyone know ??
All that and your corked it up with short tube headers? The LT's you cut out were better. Otherwise good show
You guys need Milwaukee Cordless!!!!
Супер!!! Америка автомобильная держава !!!
How on earth does one re-install that gas tank without cleaning first?
Torque arm is nice. Would have been nicer with rear irs , or went with the lighter Fay2 watts link in the rear in addition to the torque arm rather than that pan hard bar mess.
And the 340 hp 302 is nice but a nice 408, 410 ,427 -351w based stroker with the v3 si system would be the way to much more torque and horsepower
Where your PPE?
Where can I find those shirts
Kobalt?
It needs a Ford Barra engine!
If Yall need to do another Fox....Hoila at me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I didn't see one torque wrench being used.
Axle nut he used one
if you are doing a k member swap, why would you cut the headers out?
this series would be more popular if they got rid of Jason.
What was he thinking cutting the headers? Cool build but get mechanics that have some skills in a shop. Those headers would sell on the web for a couple of hundred bucks. What a waist of good parts that someone could use to get there hotrod moving. Other then that I love the parts the customer chose and might actually do the same to one of my Fox Body's. Dial that thing in and it will be a street daemon. Good job guys, try and not cut stuff up next time and this video would be perfect.
Goomba Jason has returned to show us his automotive mediocracy.
He's an expert on....................................................pipes.
What spindles did they use?? Looks like the new edge ones??
What's the total on the parts list