Відео

Yesterday my toilet flushed and then was extremely slow filling. I flushed any debris from inside (there was some), turned water back on and it flushed/filled fine. But then it wouldn't fill again unless I turned water off and back on. So I initially ordered a whole new fill valve from amazon along with more flappers because I noticed the current one was looking very rough. Then after further research, I saw advice to just replace the seal for the fill valve. So I made another amazon order for 2 seals (one for future use). I got the 1st order today, with the full valve kit and decided to use the seal from it instead of waiting for the 2nd order of 2 seals (because I'm tired of not flushing or having to turn the water off/on). The first few flushes filled at a good speed, but after done there was a squealing noise that hadn't happened before. Came back to youtube and saw the same advice of changing the seal to stop that issue. I pressed down on the top of the fill valve and now it seems to be quiet, at least the last few times I've flushed. When I get the 2nd order of seals, I'll open a package and put one in the new fill valve and not have to worry about remembering if the whole thing needs to be replaced. It is nice being self-sufficient, especially if you don't have a man around to be handy.

Worked perfectly! My Moen shower head was horrible, removed the ring inside and it’s now normal pressure! Thank you for the helpful video

Are you going to be starting from the deck, or using the rope guide, which keeps it in place further up the handle?

I have had my share of wheels break, especially at the brackets. Same old company story. What did they think, you made the shit up.

Dude, it only takes a coupple minutes to drain a water heater, without using a pump. Who the hell told you it takes 2-3 hours to drain😂😂😂 WTF

Why do you need to heat hot water? Sorry, couldn't help myself. 😊

I had a restricted water flow from my shower head as well, but I troubleshooted with the shower head removed and then turned on the water after removal to see what the flow pressure was like thru the shower hose. Low and behold it also had washers that restricted the flow so then I removed the washers from the hose and turned the water on again and whoa Nelly, the water came thru at 2.5 GPM, just like the pressure valve is rated. I then screwed on the shower head again, leaving it's washer in (because it is also deeper inside and harder to remove compared to the hose washer. Problem solved, water pressure was fantastic!!!

Yep, I have one of those except mine is DC. I use it to transfer external water containers (IBC totes) into my travel trailer's 80-gallon tank. It does quite a good job and I can mount it to the deck of my cargo hold. It is actually my second one, since I accidentally ran the first one dry for about 20 minutes when I walked away and the tote ran out of water. That will burn out the pump. I think the limit is about 30 seconds of running dry.

Thanks so much! Exactly the fix I needed.

please dont stop the yardmax videos because I just bought one

Why not use wire instead so you don’t have to deal with the ties getting brittle and breaking?

Thanks for this, my drier has been smelling and I can see lint on the outside back so now I know I can fix the problem myself. I’ve had the back off once before to replace a fuse but didn’t realize there’d be lint buildup back there.

I hate and love this thank you

You didn’t actually show how to replace the wheel. So this clip is useless!!!!!!

Doesn't show fault in seal component.

Which brand did you use for oil ??

Good review. Just facts. I have one of these. Definitely not the highest of quality but it's the cheapest one I could find. I refuse to spend a tremendous amount of money on a push mower. I have had good success with it thus far. The one thing you mentioned about the smoke and the back fires. Could be the timing is off by literally one tooth or it could have been damaged from brand new. I have read a lot of reviews that sound like people have damaged them right out of the box. They put cheap oil in, start them one time, drain the oil back out and ship them. One thing I always live by is all motors need to be broke in. Manufactures say no but really it's your risk. When I got mine, before I ever started it. I turned the blade and it was really rough. I put synthetic oil in it and good gas and cycled it a bunch of times before I started it. I ran it for a half hour before I ever cut with it. It puffed white smoke on the first start and never did it again. Nothing is made with the same quality it used to be. I think we all have to be more diligent these days or we won't have anything very long

So, they never send you a replacement wheel?... I got yardmax yg2760 less than a year and so far so good. But concerned about how to get replacement parts for it in the future. BTW thank you for the video about yardmax customer service.

Excellent. Going to do my door today.

Did u replace the seal/gasket?

Yes I agree we need to see what is being done not just talk about it show us

The reason for the back fire is because the carburetor puts in a lot of gasoline at low revolutions and when it starts it also causes a lot of smoke.

Is your shifter lever stock?

Plastic wheels break on all the mowers regardless of the cost or quality of the mower. Then the replacements cost more than the mower is worth. I have a Toro push mower from about 1978 with an aluminum deck and steel wheels. It outlived the engine. Just the opposite now. The plastic shit breaks while the engine is still fine. Plastic wheels, plastic gears in things, plastic auto engine parts and housings. Why do they design things that have to last with plastic. Do they hate us?

It’s always the mower deck that rust out or like your issue the handle breaks. The motors tend to last along time if you change the oils and plugs. I tried to give a good running mower to a repair shop but they didn’t want it, they had more than a dozen out back already with good motors but everything else was rusted away.

I watched this video, replaces my belt and two days later belt got shredded. It kept falling off till it finally got caught in the blades.

My upper filter looks like there's a ball of sediment or minerals. Hope I can get it cleared. Did soak it in vinegar. Thanks

Thanks so much for making this video. I normally dread these jobs but your instructions made it easy!

Try a crochet hook.

Replace the tube.....

I heard E.D. Touring is a very comfortable seat a bit too expensive, though,... stay away from jell seats they're the worst, especially in cold weather, when it settle down its like you're sitting in a wooden seat.

10:04 10:05 10:05

Soooo helpful, thank you!

surprised me as well that they didn't include oil w/the yardmax yg1550

I’m staying at an Airbnb and was feeling REALLY stupid for a few minutes! Thank you!!

Lowe's and home Depot have a bad selection of toilet stuff...try your local ace hardware

You can also wrap the tube using electric tape and make it snug so that it won’t pop out. The other method is to order new tube from kohler only $1.60 each. I’ve tried both and both worked great.

Wow thanks! I was looking at self propelled, but this mower has such crummy reviews! 2nd year I'd hope it still works! After looking at zillion mowers now, the reviews make me think we are in "Chavez" world when he had tractors manufactured for the farmers & ditched availability of good brands like John Deere etc. The new "Chavez" tractors 🚜were shiny & beautiful & inexpensive! A year later they were abandoned broken down falling apart in farmer's fields all over Venezuela! 😐

This small fix worked like a charm! Thanks

thank you! It made the job easier to do!

Thank you for your time. Well done. Gonna try it.

Thank you !

You will have to examine the plastic seat in the base of the valve body. If there is a crack anywhere a new rubber diaphragm won't stop the leaking!.

Great instructions, especially using the Chrome peice as a template, im installing mine this weekend, and thanks for clarifying the process.

Kohler has a replacement for the top piece. GP1229656. It replaces the 'hole' top with a nipple top so that it holds the tube in place.

I'm losing my mind, trying to get the "float" to trigger the shut-off :( It just won't.

I just got the same shower head, removed the restrictor, but not all settings actually work. Did you in plumbers tape and the included washer? Or just the washer? or remove the washer and use plumbers tape? Thank you!

Thanks for the video! I was glad you found accessories to fit the 950 v star so I didn't have to order something without knowing for sure it would fit. I ordered the same backrest and saddlebags for my 2012 v star. Have you posted videos of the installation for those?

How about a wide zip tie used were both meet? And wrap some Teflon tape around the fill tube too get the tude wider. Just an idea.

Lemme tell ya something. STAY AWAY FROM ANYTHING CALLED YARDMAX! Chinese junk! I bought a ‘22 around 5-15-23 and used it only about 5-6 times. It is made with extremely cheap components. The plastic knobs for closing and locking the handle broke off. The height adjustment broke off. The front wheel broke as I was using it and the axle came out off place. The plastic for the undercarriage cracked in two requiring its complete removal. That cover the belt and pulleys for the self propel assembly. Needles to say, that can no longer by used. Surprising no engine issues (yet) and it will cut serious grass-provided you have patching up skills. THIS POS IS CHEAP FOR A REASON AND YOU WILL GET WHAT YOU PAID FOR! BUY ONE: YOU WILL BE SO SSSSS)OOOOORRRR