How To Install Power Steering Rack | Fox Body Mustang (79-93)
Вставка
- Опубліковано 26 лип 2022
- We show you how to install a power steering rack on your Fox Body Mustang!
Replacing a power steering rack is a big task. With some essential hand tools and help from Landan with LMR, you will know the steps to install the power steering rack on your 1979-1993 Fox Body Mustang to be back on the round in no time!
Shop
79-93 Fox Body Mustang Power Steering Rack: lmr.parts/LRS-3504A-KIT
Shop All 1979-93 Fox Body Mustang Steering components: lmr.com/products/79-93-Mustan...
Watch
1979-1993 Power Steering Rack Review: • Power Steering Rack Re...
How To Flush & Bleed Power Steering Fluid: • How To Flush And Bleed...
How To Remove & Install Power Steering Pump | Fox Body Mustang (79-93): • How To Remove & Instal...
How To Remove & Install Power Steering Pump Pulley:
• How To Remove & Instal...
How To Remove Power Steering Rack | Fox Body Mustang (79-93):
• How To Remove Power St...
Social
UA-cam: latemodelres.to/youtube-subsc...
Facebook: / latemodelresto
Instagram: / latemodelresto
TikTok: / latemodelresto
#LMR #50resto #Foxbody
________________________________________
Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | lmr.com/page/lmr-install-vide... - Авто та транспорт
literally got the rack off today and this video is up to reinstall. Thanks lmr
Heck yeah, My 92 needs a new rack! Keep em coming! LMR FTW!
can't wait to buy one thanks for the videos 👍🏼
Crazy needed this video months ago
Very nice instructional video! Enjoy the channel!
I got one,thanks lmr
Amazing 🔥🔥🔥
I need one these soon 😩
Just bought one from y’all. Ironic aye.
This new rack seems to look a bit lighter than the factory 1?
My new hoses are leaking from the Rack side. I think the white o-rings stretched when I put them on the original power steering hoses. Is there a way to get those nylon hoses on without stretching them? it seems almost impossible on this car. I've did it before and had no issues on another Fox.
Put a little transmission fluid on the sealing washer and carefully use the end of pick to roll the washer into position. Option 2, soak the sealing washers in warm water to soften them up and use the same process. This makes them even easier to roll down the threads of the fitting. Let them return to ambient temperature before installing the fitting. -Landan
I have installed two high pressure lines and tried all sorts of different things but it still leaks at the rack fitting. Any suggestions?
It could be that you're over tightening the fitting. You can't get a torque wrench on the fitting, but the spec is 10-15 lb-ft. I'm sure you've already verified that you're using a sealing washer? -Landan
Landan,
Can I run rubber bushings instead of these super difficult urethane bushings?
Yes, you can rubber bushings. -Landan
@@latemodelrestorationThanks! Roads are awful up this way.
Why do my 92 foxbody has splines on the rack but the reman I got is tapered
I'm not sure. There could be several reasons as to why that happened. I would ask the company you purchased the rack from. Or, return it and just purchase a brand new unit from us. -Landan
You think there is any reason I couldn't connect the hoses to the rack before I install it? Then have a buddy help fish them up as I get the rack in place.
Go for it! -Landan
how did you get the metal sleeves out of the replacement
It's mentioned and shown in the video at 2:49. -Landan
I want to go manual rack wt is your opinion
I like creature comforts. I've driven cars with manual steering racks, and don't really care for it. If you're going all out in terms of saving weight and going fast, then a manual rack should be considered. -Landan
Is there any reason why before the hoses ran inside the sway bar and and after outside of the sway bar?
The clocking of the hoses moves them underneath the sway bar. -Landan
@latemodelrestoration I ended up having some issues with some hoses I got from parts store watched this to see what way they routed and then got confused when it was different from the before
@@kpb711 Thanks for the clarification. Either way is fine. -Landan
@latemodelrestoration my car was pretty heavily molested when I bought it I see the bracket for the pressure line says 86 to 93 did the 85 not have a bracket on the hose
@@kpb711 Yes, but the bracket was a different design. -Landan
Me like
Bullshit. Do the 04
mine works fine quit trying to make Sales
What a weird comment.
@@kpb711 bro is mad he watched a video on something he clicked on
@xai-ug5lu probably going to beat his wife cause he cheated on her with his sister.