How to Replace Front Driver Side Inner Tie Rod 1993-1997 Ford Ranger

Поділитися
Вставка
  • Опубліковано 13 вер 2022
  • Buy Now!
    New Tie Rod from 1AAuto.com 1aau.to/ia/1ASTE00984
    This video shows you how to replace the inner tie rods on your 1993-1997 Ford Ranger. The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms.
    This process should be similar on the following vehicles:
    1993 Ford Ranger
    1994 Ford Ranger
    1995 Ford Ranger
    1996 Ford Ranger
    1997 Ford Ranger
    Tools you will need:
    • Pry Bar 1aau.to/oa/1AXAA00020
    • 16mm Wrench
    • 15mm Socket 1aau.to/oa/1AXAA00015
    • 19mm Socket 1aau.to/oa/1AXAA00043
    • 21mm Socket 1aau.to/oa/1AXAA00043
    • Air Compressor
    • Blowtorch
    • Pickle Fork
    • Large Locking Pliers
    • Pliers
    • Side Cutters
    • 3/8 Inch Air Impact Gun
    • Ratchet 1aau.to/oa/1AXAA00016
    • Torque Wrench 1aau.to/oa/1AXAA00044
    • Anti-Seize Grease
    • Cloth Rags 1aau.to/oa/1AXSS00035
    • Rust Penetrant
    • Sledge Hammer 1aau.to/oa/1AXAA00091
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • Авто та транспорт

КОМЕНТАРІ • 5

  • @TRQ
    @TRQ  Рік тому

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @AshtonRWade
    @AshtonRWade Рік тому +2

    if my ranger is lifted is it necessary to remove the tire,

  • @dukyben733
    @dukyben733 Рік тому +1

    You greased the joints, right?

  • @Martinez07
    @Martinez07 7 місяців тому +1

    That tie rod isn’t going to last if the boot came off that easily it’ll easily let dirt in and ruin it, junk part installed

  • @elspookeymew1900
    @elspookeymew1900 3 місяці тому

    Im suprised you arent replacing everything with thw amount of rust this thing has