Scout II DIM DIY - Design Fabricate Install - Frame Strengthening Scab plate engine mounts for 408
Вставка
- Опубліковано 26 сер 2024
- DIM DIY video on the Design Fabrication & Installation of our frame strengthening scab plate engine mounting system for swapping a Dodge Dakota 5.9 Magnum engine into a Scout II. The horns on the scab plates allow using stock Scout II engine mounts & IH engine as well. See areas by timestamp below.
We show - how we removed existing engine mounting horns. We show how we designed and fabricated new horns out of 1/4 steel plate. We go over Design and Fabrication of new 1/4" steel Scab Plates. We show how we located and aligned Horns -Plates to Frame. We modify and strengthen existing engine mounting brackets. Last we show frame & steering box reinforcing scab plates welded to frame.
Intro
Overview of what needs to be changed 1:07
Process used to remove horns and ready frame 4:45
Time 2 cut,mark, & drill new 1/4" steel scab plates 6:58
Drilling holes using DIM DIY drill alignment tool 8:55
Plate holes drilled - confirm alignment steering box 11:47
Process we use to locate holes precisely for drilling 13:17
Design process and fabrication of new horns 14:55
Locating horns on plates for welding 19:51
Final prepping of frame for welding to frame 22:54
Welding completed plates/horns to frame 26:11
Redoing / Strengthening 408 Engine Mounting Brackets 29:00
Look at finished plates, horns, idolators, mounts 30:23
P.S. The engine is now a 408 as the 5.9 was stroked using Scat package (see other videos)
==============================================================
Disclaimer:
Due to factors beyond the control of this channel, we cannot guarantee against improper use or unauthorized modifications of information. This channel assumes no liability for property damage or injury incurred as a result of any of the information contained in any video on it. Use information on this channel’s videos at your own risk. This channel recommends safe practices when working on any projects and or with tools seen or implied in any video. Due to factors beyond the control of this channel, no information contained in these videos shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of tools, equipment, or from the information contained in these videos is the sole responsibility of the user and not of this channel.