good to know that you solved the problem by cleaning the ps5. I´m having the same problem, the ps5 shut off after few hours and I´m here to learn how to do it. thanks
I don’t have a ps5 but looking to get one just bc it’s new and they don’t sell new ps4’s anymore and don’t trust refurbished and this looks ALOT simpler than the ps4 version ☠️
@PCC-DRiPPy it's not 100% safe, you can mess it up. I saw someone post on ifixit that they removed the yellow part with pliers because they saw pliers being used when unplugging the fan... they ripped out the socket instead of the plug. I can see a lot of people mistakenly grabbing the yellow part of the plug and ripping that out before realizing the plug is just the middle white plastic. That being said, if you're careful it's very safe and not that hard. But be careful!
@@moa8121 give SONY or playstation a call and tell them what you wanted to do And also you don't feel comfortable of doing it on your own Id never done it before it's a expensive console thats the thing
This is the best video by far if you don't want get to complicated. It was my first time cleaning since I bought it last year, it was much needed it's quite again.
@@iceman62509 The screwdriver is probably a Philip's. But, if you're not sure, just check the screws on your PS5. I am pretty sure it is a Philip's though. Sony would not have used screws like Apple does, either torx or pentalobe screws. They made it accessible for us to be able to clean the fans and the inside.
Everyone watching this as a tutorial and attempts to take out the fan. YOU NEED THAT T9 driver. Without it you’re not going to ope sh!t but instead end up damaging the screws by trying ti poke around and seeing if something else might fit. MAKE SURE TO HAVE THE T9!
You can also use a mini vac or vac tube and tape a sturdy straw to the end and reach the straw inside of tight spots to suck dust instead of blowing it all around into other areas of the internals. Js another method I’ve discovered for myself as well that works well.
Definitely one way to MacGyver a cleaning, the only issue is you cant get into the fan with a straw, you'll only be at the surface which with the opening of a straw likely doesnt have enough power to pull the dust from deeper inside the fan ✅Wil
T-8 Screwdriver. Designed for working on electronics and smaller equipment. Home Depot/Lowe’s has really cheap sets. I’m getting one while I’m watching this
Just wanna say thanks, ps5 quieter than a mouse now, it was making a noise with the fan, basically saying clean me so i did, thanks to u ill know how to do this nexttime alot easier so God Bless You, keep up with the great content, very helpful and informational. Probably once every 6months to a yr, like before.
Just did it and admittedly was terrified but it’s perfectly safe I couldn’t actually get the screws out to clean the majority of the dust so had to manually clean with a cue tip and a hoover in both hands 😅
I was kind of scared to do it though, But somehow I feel like I wasn't afraid to Fixing my PS5 so I just cleaned the dust out and the fan And it was way too easy for me 🙂 after fixing it my fan is operational 👌🏾
Great video. How often would you recommend cleaning the PS5? Every 6 months or so? I've had it a year and haven't cleaned it yet. I just ordered some compressed air and I will be doing this as soon as it arrives.
I've had mine for over 2 years and I'm barely cleaning it today for the first time. There isn't even much dust. I keep my PS5 covered when I'm not using it, so that prevents dust from getting inside it.
@@GoodBoyGoneDad I definitely keep mine covered as well. However, I have turned on the iPad and have played a game with it still on, so I have to remind myself to take it off lol PS5 has actually shut off because I kept it on for a long time. Hopefully no lasting damage has been done. It seems to be ok and I have been playing it a lot lately.
@@Introversitive I don't remote play, but I still worry that I might not uncover it, so I think about it while playing a game and look to make sure I uncovered it. 😂
@@GoodBoyGoneDad Me too. And I have forgotten to cover the thing a few times. I have blown the dust out twice since owning it. I bought it two years ago this December.
I never give anyone respect but I have to be honest you're a real hero I was a little nervous at first but it's easy you do like he said and it's easy to put back on the snaps on I want to give you every respect you deserve sir your hundred percent right and not too many or like you thank you so much and I just bought my brand new PS5 last week it's good to keep them clean at least once a month
When you put your side plates back on do not push on them like he does!!! Gently slide panel into place and then gently push upward. When I did it the way he says I bent the circles the snap into place in the top corners. Hopefully none of you have the same issue
HI there! You can find the screwdriver needed for this here: T9 Screwdriver (to remove the fan): amzn.to/37oayFn. Let us know if you need further assistance. 💚Britney
I was wondering what kind of screw driver do I need to take the screws off or would it just be a normal screw driver I would use? Also where can I find that exact screw driver you were using to take out the screws and put it back.
Hi there....My PS5 is constantly cutting out during games. I though giving it a good thorough clean as per your tutorial would fix the issue, but its still the same. Have you any suggestions please? Great tutorial by the way...
Hi there! Thanks for check us out! What kinda of cutting out do you have exactly? Could be a few different reasons... wifi signal, updates needed, storage is low or a restart. 💚Britney
This was super easy, i didnt have screw drover needed so i held off on the fab, cleaned everything else, and im confident in doing the can once i get the drivers needed
A smaller attachement will help get into some nooks, but it's not necessary. Sometimes a regular vacuum is better because it doesnt have the focused force of a smaller one that could break small pieces of plastic. ✅Wil
I just got ps5 digital today , and now I'm here to know how to clean it . And also i got a question , can i put my ps5 digital vertically? Because i heard rumors that the liquid will damage the system .
This is nothing to worry about. Those reports that came out were false. The original report that came out has now come forward saying he made a 'critical misunderstanding' and Yasuhiro Ootori from Sony’s design department has also debunked this. This one report unfortunately caused unnecessary paranoia. Please don’t believe everything you see on the internet. ✅Wil
Most definitely - it seems intimidating at first but once you get the hang of it you will be set! Please let us know if there is anything we can help out with! 😊
I have seen many use a vacuum to clean the fans and the outside etc especially those big holes in the middle the dust catchers, is it safe to use a vacuum if its off the power source for like 20 min ?
We dont suggests using vacuums. Vacuums notoriously create a ton of static which can be discharged into your console and fry the parts. Canned air is usually only around ~$3-5 ✅Wil
@@HIDEitMountsyou dont suggest using vacuums but you said in another comment that there the best lol. You just agree with anyone for some likes and comments huh
Hi there, we used the standard Phillips screwdriver, you can find one at your local hardware store! Hope this helps! Let us know if you have any further questions. 💚
is the ps5 sturdy enough for a regular owner to clean themselves? I have had mine for less than a year but I am just a little worried that it is really delicate and i will break something when i finally get around to cleaning it (i was told to clean it every year?). If someone that has owned one can let me know if its sturdy enough it would be great. thanks in advance.
It's totally fine. As long as you dont drop it, it will be fine. The reports people put out of the PS5 breaking from putting it vertical were actually false and caused by something else ✅Wil
Its the reason he didnt go super far, especially with the PS5 being an enclosed system. Also the reason electronic cleaning is a business in itself. Too much force, get stuff stuck. Too much suction, dislodge parts. ✅Wil
Whatever works. I've been told to avoid it due to the static vacuums create. Heard a stat years a go that something like 40% of computer lag can be attributed to static slowly frying components. ✅Wil
You are the only guy who shows us how to clean without disconnecting the fan. Its a nightmare to disonnect that fan
I know I scare I made damage the thin wire 😮😢
Never have I ever seen the easiest description to take these things off!
Thank you
took me 3 min
I did it in under 30 minutes! Great tutorial! It’s fixed the issues where my PS5 would randomly shut off while gaming after an hour or so!
good to know that you solved the problem by cleaning the ps5. I´m having the same problem, the ps5 shut off after few hours and I´m here to learn how to do it. thanks
That’s awesome dude I need to do this today mine just starting shutting off now recently no warning just shuts off.
What type of screw did you use the open the fan yo get it out
Excuse me, what kinda screwdriver do I need for the fan cover?
@@jakimusPrime_07 to take the fan out you need a t9 security screwdriver
Had to pause the video at 1 minute to say thank you i was struggling to open this damn cover and following what you did made it so easy!
Glad it helped ✅Wil
I’m scared to do this to my 600 dollar PS5
I just did it. It’s completely safe and my system is running fine
Its totally fine. I've done it twice now.
I don’t have a ps5 but looking to get one just bc it’s new and they don’t sell new ps4’s anymore and don’t trust refurbished and this looks ALOT simpler than the ps4 version ☠️
@PCC-DRiPPy it's not 100% safe, you can mess it up. I saw someone post on ifixit that they removed the yellow part with pliers because they saw pliers being used when unplugging the fan... they ripped out the socket instead of the plug. I can see a lot of people mistakenly grabbing the yellow part of the plug and ripping that out before realizing the plug is just the middle white plastic. That being said, if you're careful it's very safe and not that hard. But be careful!
Imagine me who had to pay over 900us because I need to buy one for the government too
DO NOT use canned air. It will just push the dust more into the console. Instead use a vacuum
Vacuum does work best just make sure not to put the fan through to much air pressure or stress
If it was me I'll send it to SONY headquarters and tell them to do this for me the hard way as if there was a problem with my console
@@Giuseppe1299 where is the information about sending my ps5 to Sony to have it refurbished?
@@moa8121 give SONY or playstation a call and tell them what you wanted to do
And also you don't feel comfortable of doing it on your own
Id never done it before it's a expensive console thats the thing
@@moa8121 or take it too your local SONY shop
This is the best video by far if you don't want get to complicated. It was my first time cleaning since I bought it last year, it was much needed it's quite again.
No its not. Cause i still dont know what screwdriver to use. He doesnt give that specific
@@iceman62509 The screwdriver is probably a Philip's. But, if you're not sure, just check the screws on your PS5. I am pretty sure it is a Philip's though. Sony would not have used screws like Apple does, either torx or pentalobe screws. They made it accessible for us to be able to clean the fans and the inside.
@iceman62509 it's a torx head. It's 6 sided
Everyone watching this as a tutorial and attempts to take out the fan. YOU NEED THAT T9 driver. Without it you’re not going to ope sh!t but instead end up damaging the screws by trying ti poke around and seeing if something else might fit. MAKE SURE TO HAVE THE T9!
Hi Moe! Thank you so much for your comment! We have updated the description as well. Have a wonderful day! 💚HIDEit Mounts
I have a 60 T9 but it doesn’t work, there is no litlle hole in the middle
T8 T9 or T8H T9H bro?
@depr0fundjs where can I find this tool?
@@karllatraverse6772what is that T9 called with a hole in the middle. Is it something specific?
You can also use a mini vac or vac tube and tape a sturdy straw to the end and reach the straw inside of tight spots to suck dust instead of blowing it all around into other areas of the internals. Js another method I’ve discovered for myself as well that works well.
Wouldn't using a vacuum make more dust
Definitely one way to MacGyver a cleaning, the only issue is you cant get into the fan with a straw, you'll only be at the surface which with the opening of a straw likely doesnt have enough power to pull the dust from deeper inside the fan ✅Wil
What screwdriver is thisss? I opened it and its not a regular one
T-8 Screwdriver. Designed for working on electronics and smaller equipment. Home Depot/Lowe’s has really cheap sets. I’m getting one while I’m watching this
i did this today and dusted off so much i was scared to slide off the covers xD but i got it done
Just wanna say thanks, ps5 quieter than a mouse now, it was making a noise with the fan, basically saying clean me so i did, thanks to u ill know how to do this nexttime alot easier so God Bless You, keep up with the great content, very helpful and informational. Probably once every 6months to a yr, like before.
Do not force your ps5 open I just broke mine. Slide it off and on
Soon as you said slide it off i slid it off GG.
My condolences are with you my brother.
Broooo I think this happen to me I can’t get it back on
😂😂😂😂
life saver! this should be pinned on top
What kinda head do I need for the screwdriver to take the fan cover off?
wrd
It’s a t9
It's a T9 Torx Screwdriver with a security bit.
@@HIDEitMounts thanks
@@joevonharris4995 Thanks
Just did it and admittedly was terrified but it’s perfectly safe I couldn’t actually get the screws out to clean the majority of the dust so had to manually clean with a cue tip and a hoover in both hands 😅
2:23 what type of special screwdriver head is that then because i have a whole snap on tool set and none have a whole missing in the middle ??? I
T9
Thanks first time cleaning my ps5 really worried but your tutorial helped
Remember when I tried to fix my PS4 because it sounded like it was about to take off? Well, it finally did… as soon as I started it up again 😂🙌🏼
Damn, when PS4's fly
Haven’t had any issues since following these tips. Thank you
Great to hear! 🟢-Wil
same principle with a ps5 slim disc version?
I was kind of scared to do it though, But somehow I feel like I wasn't afraid to Fixing my PS5 so I just cleaned the dust out and the fan And it was way too easy for me 🙂 after fixing it my fan is operational 👌🏾
Great video. How often would you recommend cleaning the PS5? Every 6 months or so? I've had it a year and haven't cleaned it yet. I just ordered some compressed air and I will be doing this as soon as it arrives.
It's recommended to clean it every month for a good console performance.
I've had mine for over 2 years and I'm barely cleaning it today for the first time. There isn't even much dust. I keep my PS5 covered when I'm not using it, so that prevents dust from getting inside it.
@@GoodBoyGoneDad I definitely keep mine covered as well. However, I have turned on the iPad and have played a game with it still on, so I have to remind myself to take it off lol PS5 has actually shut off because I kept it on for a long time. Hopefully no lasting damage has been done. It seems to be ok and I have been playing it a lot lately.
@@Introversitive I don't remote play, but I still worry that I might not uncover it, so I think about it while playing a game and look to make sure I uncovered it. 😂
@@GoodBoyGoneDad Me too. And I have forgotten to cover the thing a few times. I have blown the dust out twice since owning it. I bought it two years ago this December.
Great video, however you will need a Torx-head T8 screwdriver for the screws!! this is very important!!
Sorry about that. We've also had reports of T9 and some with security screws as well ✅Wil
I never give anyone respect but I have to be honest you're a real hero I was a little nervous at first but it's easy you do like he said and it's easy to put back on the snaps on I want to give you every respect you deserve sir your hundred percent right and not too many or like you thank you so much and I just bought my brand new PS5 last week it's good to keep them clean at least once a month
Thank you very much. It's was my consoles first clean since I got it. Very dirty
Right to the point, good talk & camera angles. Big thanks for showing this 🙂
Glad it was helpful ✅Wil
When you put your side plates back on do not push on them like he does!!! Gently slide panel into place and then gently push upward. When I did it the way he says I bent the circles the snap into place in the top corners. Hopefully none of you have the same issue
I can’t even get the panel off
Thank you god for your tutorial I truly hate taking off the plates and you made it fairly easy for me.
Im not able to do it. Plates start bending to the point it looks to be about to break
@@gamirabal you’ve gotta lift up and push.
@@AgustDInMehow the fuck do you lift up and push down at the same time
Doesnt fan have wiring how to disconnect that
Thank you for sharing it. I have all the tools unfortunately I dont have PS5. Can you please show us any other way to clean it?
You have the tools but not the console? not sure how to help you out with that.
@@HIDEitMounts😂😂😂
What screwdriver did you use to take out the fan?
You need a Torx T9 Screwdriver. You can get a set pretty cheaply at most local stores.
@@HIDEitMountsTorx Security, regular Torx will not work. I used a T8 / T8H and it worked fine but I've heard T9 will work too.
Hey does anyone know the exact screwdriver needed to take out the screws around the fan? Thank you in advance
HI there! You can find the screwdriver needed for this here: T9 Screwdriver (to remove the fan): amzn.to/37oayFn. Let us know if you need further assistance. 💚Britney
Finally did a full clean thanks to you! Didnt think my fan was that dirty but holy😂
Woo hoo! Glad we can help! 💚
I was wondering what kind of screw driver do I need to take the screws off or would it just be a normal screw driver I would use? Also where can I find that exact screw driver you were using to take out the screws and put it back.
T9
HI there! You can find the screw here: T9 Screwdriver (to remove the fan): amzn.to/37oayFn 💚Britney
Hi there....My PS5 is constantly cutting out during games. I though giving it a good thorough clean as per your tutorial would fix the issue, but its still the same. Have you any suggestions please?
Great tutorial by the way...
Hi there! Thanks for check us out! What kinda of cutting out do you have exactly? Could be a few different reasons... wifi signal, updates needed, storage is low or a restart. 💚Britney
This was super easy, i didnt have screw drover needed so i held off on the fab, cleaned everything else, and im confident in doing the can once i get the drivers needed
😊😊000😊😊😊0o
Can any screwdriver kit work for the ps5
Mine isn’t working I got one screw out not anymore
Good tutorial but a security T8 bit is needed. Not a screwdriver.
What kind of screwdriver was it I’m struggling to unscrewe the fan
It's a Torx screwdriver - Sometimes it's T8, others T9 and some have need a Torx security bit. ✅Wil
what the hell is the screwdriver, literally don’t have a 6 side star screwdriver
T9 screwdriver
Thanks for the video cleaning mine as we speak. Launch disc ps5 never been opened. Very fun…. lol
Oh joy, gotta love when you get a lemon ✅Wil
What screw do you need to disconnect the fan?
It's typically a T8 or T9 with a secruity bit ✅Wil
I've seen comments saying to use a vacuum. Does it have to be small of big because i do not have a small one rn
A smaller attachement will help get into some nooks, but it's not necessary. Sometimes a regular vacuum is better because it doesnt have the focused force of a smaller one that could break small pieces of plastic. ✅Wil
What size is tht drive to open the fen
Glad that it helped. Make sure to check out our wall mounts to help keep your console cooler than standing on a shelf or table. ✅Wil
I just got ps5 digital today , and now I'm here to know how to clean it .
And also i got a question , can i put my ps5 digital vertically? Because i heard rumors that the liquid will damage the system .
This is nothing to worry about. Those reports that came out were false. The original report that came out has now come forward saying he made a 'critical misunderstanding' and Yasuhiro Ootori from Sony’s design department has also debunked this. This one report unfortunately caused unnecessary paranoia. Please don’t believe everything you see on the internet. ✅Wil
@@HIDEitMounts for real ? Okay 👌 thanks bro 👍👍
Taking off the panels is the hardest part
Most definitely - it seems intimidating at first but once you get the hang of it you will be set! Please let us know if there is anything we can help out with! 😊
@@HIDEitMountsI can’t get them off at all it’s so stiff and I don’t wan to break it
I have seen many use a vacuum to clean the fans and the outside etc especially those big holes in the middle the dust catchers, is it safe to use a vacuum if its off the power source for like 20 min ?
We dont suggests using vacuums. Vacuums notoriously create a ton of static which can be discharged into your console and fry the parts. Canned air is usually only around ~$3-5 ✅Wil
@@HIDEitMountsyou dont suggest using vacuums but you said in another comment that there the best lol. You just agree with anyone for some likes and comments huh
Great video. Cheers for the help!
What is the screwdriver I’ve never seen this kind of screw driver before
T8 security screwdriver. We've also heard reports of people needing a T9. ✅Wil
My screws have tiny little hill like things in the screw which makes me unable to unscrew the fan
You need a Torx Security T8 or T8H screwdriver head.
Is the canned air optional?
You can also use a vacuum. ✅Wil
Would be nice if you mentioned what kind of screwdriver to use
fr i can’t find any screw driver that works
Check the description dooofus
We used a T9 bit in our screwdriver T9 Screwdriver
I can’t unscrew the Phan cause it ain’t screws for me it’s just these wired black dots that hold it together
Sorry for the huge lag in response. If you're seeing black dots, your on the wrong side. ✅Wil
Followed your video and now my Ps5 is running like a top. Was FULL of dust and cat dander. 😂 thank you!
Ya love to hear it ✅Wil
What kind of screwdriver do I use
It can depend. We used a T8 Torx Screwdriver, but we've heard people needing a T9 and sometimes they've needed the T8 or T9 with a security bit. ✅Wil
Thank you, very usefull video 😁
What kind/ size screwdriver please??!!
Hi there, we used the standard Phillips screwdriver, you can find one at your local hardware store! Hope this helps! Let us know if you have any further questions. 💚
How do I remove the black circles on fans ?
T9 screwdriver
The best video 15 minutes done thank you
Thanks! ✅Wil
What screw diver is it called?
It's been a while, but it should be a T9 Torx. 🟢-Wil
What is the size of the screwdriver?
T8 or T9 bit
T9
@@KindSmack t9 or t8?
@@KindSmack I mean, does the t8 works?
@@La_Horca T9 …don’t use anything else or you’ll end up damaging it
What's the screwdriver you are using?
It's a T9 security screwdriver ✅Wil
@HIDEitMounts very helpful guide. The plates are the scariest part, but after that, you can get in and clean it as much as possible
Does GameStop fix the Sony PlayStation 5 and clean inside the system?
You'd have to call and ask. A general computer repair company would also be an option. ✅Wil
What screwdriver did you use
T8 security screwdriver. We've also heard some people needing a T9 instead of a T8 ✅Wil
What screwdriver did you use?
T9 Security Torx Screwdriver. Most of the screws are normal T9 but they usually mix in a couple security screws here and there. ✅Wil
What screwdriver do I need for it?
Hi there! You'll need a standard Phillips screwdriver. Hope this helps. 💚Britney
Just needed to see someone open it up so i know which how to pop those panels cheers
Glad we could help you out! ✅ Wil
I can’t get the screws removed from the fan is theur a trick
You may be on the wrong side. One side looks like screws, but is actually the rivet of the insert. ✅Wil
Thank you, really helpful.
Glad it was helpful! ✅Wil
What screwdriver is that? I tried like 20 different ones none fit
We used a T9 bit in our screwdriver T9 Screwdriver 🟢-Wil
What mL screwdriver ?
We had a torx T8 security screwdriver, but we have heard reports of people needing a T9. ✅Wil
i hate doing the panel part lol it’s my first time n i’m scared that i’m gonna break it cos i won’t be able to get a new one 😭😭
What if the problem keeps going where my ps5 keeps getting hot and turns off I just open it and cleaned it with the air duster
You should look into our wall mounts - Our testing has seen PS5s run 10° cooler than when on a shelf. ✅Wil
Great video, thanks man
You bet ✅Wil
Am I able to use a Clorox napkin
We wouldn't suggest it, the moisture could start corrosion on the metal parts.✅Wil
What's one of the plates is stuck
Try more of a "slide" toward the bottom. 🟢-Wil
I’m using the t9 screwdriver but it it’s not fitting because the middle part inside the screw stops it
Oooo. That'll happen, ours had the security bit already. It's odd that it's not standard across all Torx screwdrivers.
What kind of screwdriver
Torx-head T8 screwdriver. You may also need the security bit as well - seems microsoft wasnt consistent across their builds ✅Wil
My fan was so dirty, thank you.
Best/ easiest video out there!
Thank you!
Saved me time and time again, I always forget how 😂
Glad we could help out! ✅Wil
What type of screws
T9
i tried my best taking the panels off wasn’t going hard at all and when i took it off those little tips broke off. 2 on each side broke off
You should be okay. At some point we swapped out panels. I just saw the other day that 3 of the tips weren't in their slots.🟢-Wil
my t9 only fit on one screw wont work for other screws what am i doing wrong
Same Megan 2 out of 4 come off but the others don't even budge sony sucke 😂
It may be that you need a T9 Security bit - it has a small bit hollowed out of the center to get around the nub inside the screw head. ✅Wil
Thanks for this. Also, you weren't kidding: Sony made this extremely easy to do.
Right? Really nice of them to do that 🟢-Wil
This is really good
Just doesn’t clip back on tho does it
Thanks, I probably woulda broke it without this
The screwdriver bit you need is a Torx Security #9 btw
Yeah, sorry we forgot to mention that. We've also heard people needing a T8 Security instead of T9 which is weird. ✅Wil
is the ps5 sturdy enough for a regular owner to clean themselves? I have had mine for less than a year but I am just a little worried that it is really delicate and i will break something when i finally get around to cleaning it (i was told to clean it every year?). If someone that has owned one can let me know if its sturdy enough it would be great. thanks in advance.
Yes first couple times you take the cover and stuff off it will be tough
It's totally fine. As long as you dont drop it, it will be fine. The reports people put out of the PS5 breaking from putting it vertical were actually false and caused by something else ✅Wil
True, it was sketchy the first time. Now that we swap out the plates for shoots, it's not bad. ✅Wil
I’ve read many times to specifically not use canned air because you’ll push the dust further into the system
Its the reason he didnt go super far, especially with the PS5 being an enclosed system. Also the reason electronic cleaning is a business in itself. Too much force, get stuff stuck. Too much suction, dislodge parts. ✅Wil
What does it mean if my Ps5 is just making a beep noise when I try to turn it on ?
I'm not sure, ours make a single beep when turned on, but that's normal. ✅Wil
Bro im struggling to remove a side i got one side off but not the other one
Try from a different upper corner, sometimes one does better than the other for me ✅Wil
Mr Clean Dry Erase cleaning pad was awesome for me to clean the underside of the panels
Great tip!
I can’t unscrew the fan plate because there’s something sticking out in each of the screw heads can anyone help?
You might be on the wrong side. They look really similar and the backside of the fan has the receiving elements for the screws ✅Wil
2:00 you removed that way too easily. I barely removed mine. I thought I was gonna break it at how much I was pulling it and it just wouldnt come off.
It feels like that the first few times, but the second time is easier. ✅Wil
Screws around my fan are sealed. Can't judge the right fitting. Help.
I believe the sealed side isn't the side you're supposed to access the fan from. The screws on the side with the ssd should be accessible. ✅Wil
Screwdriver? Mine got these pesky torq screws
Same, It's a T9 security for the most part. Occasionally they throw in a T8 for specific parts. ✅With
I was very scared at 1st but it was easy ant thank u for the tutorial
You’re welcome 😊
Same with my PC I've always used a vacuum and a paint brush. Not blew anything up yet :D
Whatever works. I've been told to avoid it due to the static vacuums create. Heard a stat years a go that something like 40% of computer lag can be attributed to static slowly frying components. ✅Wil