Thanks for watching! The PS5 used in this video was a donor console previously used by other technicians (which is why you might not see the antenna’s attached etc). 😊 If the video helped, please considering subscribing to the channel 😊
If anyone has smoked (Tobacco or weed) and played their PS5... everything will have a layer of sticky residue that won't allow you to simply vacuum or wipe the dust away. Get a big bottle of 99% Isopropyl alcohol and a lot of qtips.
I was having the issue where my ps5 would just shut off after 10min of play with only ps5 games. I followed you video on taking my ps5 apart and cleaning the power supply and the heat sinks. Now my ps5 doesn't shut off after long periods of play. Thanks! I really appreciate your video! 👍👍👍
I use a Maketa Dust Blower and shoot air back through the exhaust. It is essentially a handheld leaf blower. I also run my consoles in a room with Air Purification, eliminates the need to deep clean my electronics.
Thanks for the video! I cleaned mine a while ago just by taking the front and back panels off. I was trying to figure out why it sounded like a jet engine when I initially turned it on, I figured it was clogged. It was a little dusty but nothing terrible so I did a quick clean. Turns out it was loud because of the vibration from the fan echoing in the entertainment center. 😂 This will help when I feel brave enough to do a deep cleaning.
If anyone is doing a lot of repairs or cleaning of electronics, I highly recommend an electric air duster. Using cans of compressed air is fine for personal use but can get expensive over time for anyone needing them frequently. Electric air dusters have higher pressure than called air.
@@ChrizzyGotAFatGlizzy I am also interested to know. Mine randomly shut down and didn't wanna come back on mid game. Had to unplug it and hold the power button just long enough for it to beep then blue flashing lights for about 20 seconds before turning on. I did clean and blow it out before hooking it up originally, but it could have dust deep within it I didn't know about.
I recommend a small set of needle nose pliers to pull the clips out. Pulling actual wires could result in a potentially bad connection due to the wire possibility coming out of the connector.
Thanks Joey, my gradson had a noisy PS5 which was shutting down. Followed you steps very carefully as it's a potentially expensive learning curve, but all went well. Cannot believe the amount of dust, hairs that had built up on the large heat sinks - definately worth going through the whole process. The ribbon cable was slightly different to the ones shown, they had a metal plate that you had to push back to release the cable. That was really awkward. The one attached to the hard drive actually snapped off when bending it back, but luckily we fitted the ribben cable back and held it place with some gaffer tape. That seemed to hold and the PS5 is now quiet and not overheating. Job done! A great guide, our thanks .... the only expense was buying a T8Torque bit lol.
Great to hear Stephen! Thank you for using and following the guide 😊 I've worked on a few hundred PS5's now in total, and I don't think I've come across a different ribbon cable method to the ones I've shown in here. I'm sure the 1000, 1100 and 1200 series all have the same connector, in which you push down to release the ribbon cable. Feel free to join the Discord and upload some pictures so we can take a look 😁
Hey man! Been having trouble for MONTHS with my PS5 shutting down randomly… I followed your whole video and gave it a great cleaning! Definitely removed a ton of dust so 🤞🤞 Let’s just say, you earned my like! And if it works as it should, I’ll be back to become a subscriber! Thanks for your help!
wow I had issues until this video shed light on some thing I didnt know about. Thank to my nephews small tiny fingers and my capacity of following instructions. AND THANK YOU JDT!!!! you are the GOAT. ( greatest of all technicians ) BAMMMMMM!
I'm still kind of weary about taking my PS5 digital apart like that, but I have had it nearly 3 years and so I know I will need to do a deep clean instead of a normal clean like I have been doing every so often. I am getting the "Your PS5 is too hot" message every once in a while but it's not happening all the time and not with every game. So far it's only happened twice for me within a year. I am weary to take it to a game shop as I live in Thailand, but I might have to do that and pay for a deep clean as I watch. First I will try it myself with the help of your video.
Great video but I have a 1200 series, and I can't find a video on how to clean it. Can you link one if you know one or make one? Your guide is easy to follow and amazing, and I was disappointed when I found out I can't use this vid
I bought the precision Torx last time by accident rather than the precision security Torx so I basically wasted my money, need to make sure I get the security one this time
also why the frack isn't there a tool for removing plugs? why do we always have to worry about ripping the wires from one side or braking it from the circuit board on the other?
Update, without taking the strip you dangerously move the section and can kinda get to rows of whatever it is (I'm kinda dumb don't judge) I just air canned the shit out of it and got alot out. I'm just gonna take it to a shop👍
Legend, im about to do my annual cleaning of all my tech and was worried about cleaning the PS5 especially taking the backplate off as i thought if you did that id have to deal with the liquid metal, thanks to this video im confident to give it the cleaning it deserves, thank you
Never cleaned my PlayStation since I got it (because I thought I would snap the sides off and break it) and now I did it’s dead quiet like how it used to be
Hi - this worked for me - but interestingly, all my screws inside the PS5 are TT9, not TT8. The guarantee seal was not broken, and this was bought as new, so I supposed Sony changed this??
It's recommended, and it's not that hard. Xbox x is also the same. U should clean both systems. They make it simple . But you shouldn't wait 3 years to clean. Every couple of months you should clean it. Sony did a video on how to clean the ps5. The ps4 version was harder, but this time, it's much easier. You can find a tool set for electronics at Best Buy or a hardware store. You can do this. i have faith in you . I wasn't sure at all either, but it also helps with watching videos on the right way to do it so you're not spending money on sending it in unless there is a serious issue going on.
Hi. Nice thorough tutorial! I have a question though. I just had a sudden shutdown while playing due to dust buildup. I did some cleaning and vacuuming the heatsinks by only removing the fan. Do you think that should be enough or do I need to disassemble everything like you did? Obviously I wasn't able to remove all dust this way
Not sure if you figured this out, but I will weigh in for anyone that needs this still. I had the same issue. I removed the fan and cleaned that... it was very dirty, but got it all sorted - or so I thought. Put the fan back in and within an hour, my system shut off again. The reason it's shutting off is because the power supply isn't being cooled enough. You HAVE TO break it down like this if you want to ensure it runs smoothly again.
My ps5 must be different or newer version becuase my disc drive power supply cable access doesn't have that thin cover. It's under the plastic panel itself
For anyone lazy like me, just take off the two plates and spray air on the fans and vents make sure you can hold the fan in place n spray air in a controlled manner. As long as dust is your only problem no need to disassemble anything
When removing the metallinc heat sink, aren’t we in fact separating the microcircuits’ and other components’ thermal paste from the heat sink? I’m surprised to see that applying new thermal paste is not in the video. Fingers crossed, that this is enough! 🤞
Screwing the metal cover back to the motherboard with all the T8 screws is ruining my day. It feels like every screw wont go in straight and im stripping it and needing to use extra force.
Great tutorial but i did this to the point of just taking out the fan. I have even more issues now that my ps5 randomly turns off after in hour of playing and doesn’t turn back on. please help me
Followed the video but the fan connection, you should put a serious warning ⚠️ bc mine detached it self from the motherboard but it's still connected to the metal prongs. Nearly broke my system, I dono how long this lose connection gonna last. The fan connection was extremely tight compared to its neighbors.
Dragon's Dogma 2 says hi! It was so considerate of Crapcom to so poorly optimize their latest game that it's constantly hard-crashing PS5's across the world to the point where people are finally deciding to take them apart for a cleaning!
Does doing anything like this void any kind of warranty or anything like that? I only ask because i cleaned my PS4 before and because i took it apart to clean it, no shop would buy it off me
It does when you actually temove warrenty sticker and go deep into the console i would say anything you start screwing off isa risk just take off the sideplates and clean it that way thebfirst year
still looking for that video without the disc drive, doing the same but at a point i need to use more force than i'm comfortable with and nog guide tells me if its ok..
The four screws to take out the fan, the first one that you take out, I cannot get that one out, the other three came out perfect, I swear that screw is defective, like the middle of the head looks raised compared to the other three screws, never messed with it before. Any tips on this?
Go to take mine apart I don't know what torque screws they used but nothing fits I'm about to just hit it with a can of compressed air I don't care anymore
Nice.. Err-One of the WiFi Antenna's came undone, so I hope you realised that before you finished buttoning "Her" ?! Err-"Him"? No WAIT it's "It".. up.😄 APU 👁👍
Hey thanks for the video! Although im having trouble on this piece at 8:15 ! Theres a small metal bar/attachment thing where im supposed to push down to release the ribbon cable. I cant get the cabel out! 🙃 Ive come so far lol someone PLZ help!
Dude i seriously need help and my comments arent loading @ 8:25 Theres a piece on my ribbon cable that wont allow me to remove it. A metal bar right where im supposed to push down to release. Its not in the video and im stressing out lmao
Hey there! Feel free to join the Discord using the link in the description of the video. That way you can upload some pictures/a video to help us help you. That metal bar should be there for you to push down, but maybe something else is going on 😁😁
It’s not as scary as it looks - minimal to no prior experience required- just make sure you have a safe place to take it apart and securely place your screws
Thanks for watching! The PS5 used in this video was a donor console previously used by other technicians (which is why you might not see the antenna’s attached etc). 😊
If the video helped, please considering subscribing to the channel 😊
If anyone has smoked (Tobacco or weed) and played their PS5... everything will have a layer of sticky residue that won't allow you to simply vacuum or wipe the dust away. Get a big bottle of 99% Isopropyl alcohol and a lot of qtips.
You can use a cloth and alcohol and it removes all of the residue
Will 91% work???👀👀
@@WavyJaylen yes.
Wtf y’all be doin with that ps5 lol 😅
@@OrionApostlesmoking right next to it
Wow amazing, i did this and now my ps5 is so clean it doesn't want to turn on again
😭😭🤣🤣🤣🤣🤣
😂😂😂😂
Maybe you should put the dust right back in so it can turn on again 😂😂
bro did you find a fix cause mine is the same
Oh hell nah i ain’t cleaning my ps5 no more
I was having the issue where my ps5 would just shut off after 10min of play with only ps5 games. I followed you video on taking my ps5 apart and cleaning the power supply and the heat sinks. Now my ps5 doesn't shut off after long periods of play. Thanks! I really appreciate your video! 👍👍👍
Awesome to hear! You’re more than welcome :)
Great video, I'll add something. The power supply is also cooled by the intake fan so I would check the power supply for dust too. Great work Joey.
I use a Maketa Dust Blower and shoot air back through the exhaust. It is essentially a handheld leaf blower. I also run my consoles in a room with Air Purification, eliminates the need to deep clean my electronics.
Yes, I don't get him cleaning "hundreds of consoles" yet not using an air compressor.
Thanks for the video! I cleaned mine a while ago just by taking the front and back panels off. I was trying to figure out why it sounded like a jet engine when I initially turned it on, I figured it was clogged. It was a little dusty but nothing terrible so I did a quick clean. Turns out it was loud because of the vibration from the fan echoing in the entertainment center. 😂 This will help when I feel brave enough to do a deep cleaning.
If anyone is doing a lot of repairs or cleaning of electronics, I highly recommend an electric air duster. Using cans of compressed air is fine for personal use but can get expensive over time for anyone needing them frequently. Electric air dusters have higher pressure than called air.
👍. Thanx.
THANKS!!! USED THIS TO clean my ps5 - which had just started to randomly quit mid-game ...; EASY TO FOLLOW
Did it work to stop the issue of quitting mid game?
@@ChrizzyGotAFatGlizzy I am also interested to know. Mine randomly shut down and didn't wanna come back on mid game. Had to unplug it and hold the power button just long enough for it to beep then blue flashing lights for about 20 seconds before turning on. I did clean and blow it out before hooking it up originally, but it could have dust deep within it I didn't know about.
I recommend a small set of needle nose pliers to pull the clips out. Pulling actual wires could result in a potentially bad connection due to the wire possibility coming out of the connector.
PS5 Started taking a shit during Helldivers 2 and this cleaning method saved me from buying another one entirely. TY
Great advice on cleaning your PS5 Joey , i do clean mine regular to keep out dust to prevent overheating
Thanks Joey, my gradson had a noisy PS5 which was shutting down. Followed you steps very carefully as it's a potentially expensive learning curve, but all went well. Cannot believe the amount of dust, hairs that had built up on the large heat sinks - definately worth going through the whole process.
The ribbon cable was slightly different to the ones shown, they had a metal plate that you had to push back to release the cable. That was really awkward. The one attached to the hard drive actually snapped off when bending it back, but luckily we fitted the ribben cable back and held it place with some gaffer tape. That seemed to hold and the PS5 is now quiet and not overheating. Job done!
A great guide, our thanks .... the only expense was buying a T8Torque bit lol.
Great to hear Stephen! Thank you for using and following the guide 😊
I've worked on a few hundred PS5's now in total, and I don't think I've come across a different ribbon cable method to the ones I've shown in here. I'm sure the 1000, 1100 and 1200 series all have the same connector, in which you push down to release the ribbon cable.
Feel free to join the Discord and upload some pictures so we can take a look 😁
Hey man! Been having trouble for MONTHS with my PS5 shutting down randomly… I followed your whole video and gave it a great cleaning! Definitely removed a ton of dust so 🤞🤞
Let’s just say, you earned my like! And if it works as it should, I’ll be back to become a subscriber! Thanks for your help!
wow I had issues until this video shed light on some thing I didnt know about. Thank to my nephews small tiny fingers and my capacity of following instructions. AND THANK YOU JDT!!!! you are the GOAT. ( greatest of all technicians ) BAMMMMMM!
Nice job ..
but you really shouldn’t need to do this , on a modern day games console… just to clean it ???
I'm still kind of weary about taking my PS5 digital apart like that, but I have had it nearly 3 years and so I know I will need to do a deep clean instead of a normal clean like I have been doing every so often. I am getting the "Your PS5 is too hot" message every once in a while but it's not happening all the time and not with every game. So far it's only happened twice for me within a year. I am weary to take it to a game shop as I live in Thailand, but I might have to do that and pay for a deep clean as I watch. First I will try it myself with the help of your video.
Cheers brother. Couldn’t believe the amount of dust inside
Great video but I have a 1200 series, and I can't find a video on how to clean it. Can you link one if you know one or make one? Your guide is easy to follow and amazing, and I was disappointed when I found out I can't use this vid
That was easy thanks. 4 years and its still as quite as when i bought it.
Ps5 started making noise so just cleaned it up thanks for the help
Outstanding video! Thank you for making this straightforward and simple!
Nice one Joey, now to do one for all the other ps5’s then onto the Series S & X.
Mine is a 1215A... thanks for what you mentioned in the beginning 😅
I mostly just use a leaf blower carefully besides waste money on a can thats limited
So what are best tools to buy to clean my ps5 mate? Thanks for the video btw
I bought the precision Torx last time by accident rather than the precision security Torx so I basically wasted my money, need to make sure I get the security one this time
also why the frack isn't there a tool for removing plugs? why do we always have to worry about ripping the wires from one side or braking it from the circuit board on the other?
Im having a major issue releasing one of the strips, this thing will not come off. 8:20 in the vid. This is the one thing keeping me from progressing
Update, without taking the strip you dangerously move the section and can kinda get to rows of whatever it is (I'm kinda dumb don't judge) I just air canned the shit out of it and got alot out. I'm just gonna take it to a shop👍
Great video, I just cleaned my ps5, And followed your instructions, I’m hoping it fixes my issues. Thank you so much for sharing your videos
Thanks for an actual useful no-nonsense tutorial
Thanks Joey! Superior video, great presentation that is confidence inspiring!
Legend, im about to do my annual cleaning of all my tech and was worried about cleaning the PS5 especially taking the backplate off as i thought if you did that id have to deal with the liquid metal, thanks to this video im confident to give it the cleaning it deserves, thank you
Never cleaned my PlayStation since I got it (because I thought I would snap the sides off and break it) and now I did it’s dead quiet like how it used to be
It is recommendable to clean the liquid metal and use it a new one as same as it is done with the thermal paste of the PS4?
Thank you
Hi - this worked for me - but interestingly, all my screws inside the PS5 are TT9, not TT8. The guarantee seal was not broken, and this was bought as new, so I supposed Sony changed this??
Read this comment to late. Stripped one of my screws tryna use a T8
Excellent video thank you so much , beautiful demonstration
Glad it helped! Did you clean yours okay? :)
This helped so much thank you
Brilliant and easy-to-follow tutorial. Worked a treat!
This video has confirmed I’ll no longer be using Sony, thanks for the advice! 👍👍👍👍🙏🙏🙏🙏
It's recommended, and it's not that hard. Xbox x is also the same. U should clean both systems. They make it simple . But you shouldn't wait 3 years to clean. Every couple of months you should clean it. Sony did a video on how to clean the ps5. The ps4 version was harder, but this time, it's much easier. You can find a tool set for electronics at Best Buy or a hardware store. You can do this. i have faith in you . I wasn't sure at all either, but it also helps with watching videos on the right way to do it so you're not spending money on sending it in unless there is a serious issue going on.
amazing video my friend. new sub, what kind of hand gloves do you use?
Thanks! This is the best video on this topic in my opinion.
Thank you, mine had a lizard stuck in the fan, it died obviously!
Hi. Nice thorough tutorial! I have a question though. I just had a sudden shutdown while playing due to dust buildup. I did some cleaning and vacuuming the heatsinks by only removing the fan. Do you think that should be enough or do I need to disassemble everything like you did? Obviously I wasn't able to remove all dust this way
Not sure if you figured this out, but I will weigh in for anyone that needs this still.
I had the same issue. I removed the fan and cleaned that... it was very dirty, but got it all sorted - or so I thought.
Put the fan back in and within an hour, my system shut off again.
The reason it's shutting off is because the power supply isn't being cooled enough. You HAVE TO break it down like this if you want to ensure it runs smoothly again.
What is the little "white tack?" board you're using to hold the screws in correct orientation and how does one go about getting or making one?
Great demonstration ❤❤❤❤❤
My ps5 must be different or newer version becuase my disc drive power supply cable access doesn't have that thin cover. It's under the plastic panel itself
For anyone lazy like me, just take off the two plates and spray air on the fans and vents make sure you can hold the fan in place n spray air in a controlled manner. As long as dust is your only problem no need to disassemble anything
When removing the metallinc heat sink, aren’t we in fact separating the microcircuits’ and other components’ thermal paste from the heat sink? I’m surprised to see that applying new thermal paste is not in the video. Fingers crossed, that this is enough! 🤞
Screwing the metal cover back to the motherboard with all the T8 screws is ruining my day. It feels like every screw wont go in straight and im stripping it and needing to use extra force.
screw backward for a turn and you might feel it go into the correct groove
Are all silver screws the same size?
Great tutorial but i did this to the point of just taking out the fan. I have even more issues now that my ps5 randomly turns off after in hour of playing and doesn’t turn back on. please help me
Followed the video but the fan connection, you should put a serious warning ⚠️ bc mine detached it self from the motherboard but it's still connected to the metal prongs. Nearly broke my system, I dono how long this lose connection gonna last. The fan connection was extremely tight compared to its neighbors.
I legit cannot remove the what flab thing.. am I just not strong enough enough or something?
Why can i find the right ps5 model
Dragon's Dogma 2 says hi! It was so considerate of Crapcom to so poorly optimize their latest game that it's constantly hard-crashing PS5's across the world to the point where people are finally deciding to take them apart for a cleaning!
I clean mine semi regularly and dd2 is still crashing my console. Thanks Capcom
Great video all i need now is a PS5 to clean LMAO
Does doing anything like this void any kind of warranty or anything like that? I only ask because i cleaned my PS4 before and because i took it apart to clean it, no shop would buy it off me
It does when you actually temove warrenty sticker and go deep into the console i would say anything you start screwing off isa risk just take off the sideplates and clean it that way thebfirst year
Hi, if i have an ssd installed on my ps5. Do i need to do anything before this cleaning procedure to avoid damage or loss of data on the ssd?
What happened to the single black screw when putting back the silver screws?
I have a problem because the bit of plastic you rip off that has all the wires underneath it is not big for me its just a little square
8:06 i took that chasis off but the blue dots on the right side are seemingly damaged, how screwed is my ps5?
that was a effin nightmare, but i did it! thank you so much for the video!
Hey man at 8:25 with that ribbon wire, did you have some metal clasp or attachment that made removing the ribbon cable difficult?
@@papakneegrumps1987 yeah it felt like solid metal and it hurt my fingers, but i got it off eventually with some patience.
Ello. The black antenna cable did not connect to the motherboard, just sayin' if you didn't spot it.
Yeah this console was just a donor console I threw together, so it doesn’t function anyways 😊 Very well spotted though!
You might be getting way too hot and it kept turning off this fix it
still looking for that video without the disc drive, doing the same but at a point i need to use more force than i'm comfortable with and nog guide tells me if its ok..
Thank you so much!!!
I can’t get the fan screw to get if I used it on every other one and worked😢
Can you use a vacuum
Hey Joey love ya videos bro please do a series X Xbox on this subject. thanks
Excellent! Thank :You.
Im no tryna do this 😭 ima forget where everything goes
8:25 it's not coming out for me this part it hard to get off. And the Grey piece that was it on came off..
when I was disconnecting the fan it literally just peeled of the copper on the motherboard.
Any way you can do a series x cleaning one of these days?
Yes I'll be looking to do one soon :)
Thats odd!
The antenna cable was black above white 6:20, but by putting it together it was white above black 10:25
Very well spotted 😊 It’s a donor board so it was thrown together for the example video.
@@JoeyDoesTech 😅
When I got to cleaning the fan 4:48 3 out of 4 screws came out but I couldn't get the 4th one out
Me too
I found out you don't use screwdrivers use a torx with hole to open it up @@Rafael-v2y
Top left?
Thanks!
Thank you William! That's very much appreciated 😁❤
2:20 wtf i didn't even knew it was possible!!
The four screws to take out the fan, the first one that you take out, I cannot get that one out, the other three came out perfect, I swear that screw is defective, like the middle of the head looks raised compared to the other three screws, never messed with it before. Any tips on this?
5:58 mine don’t lift up that easy and I don’t see another screw
Does anyone have tiny pieces of metal in the middle of the screw so the T8 bit won’t fit?
They put pins in the screws, i cant get them….
Nice Video Cleaning Guide.
I can't take off the middle frame
Where do i go if i have a model CFI 1216
Go to take mine apart I don't know what torque screws they used but nothing fits I'm about to just hit it with a can of compressed air I don't care anymore
Nice.. Err-One of the WiFi Antenna's came undone, so I hope
you realised that before you finished buttoning "Her" ?!
Err-"Him"?
No WAIT it's "It".. up.😄
APU 👁👍
Yeah this was a donor boars that I was using as a demonstration 😊
Literally cannot get the second fan grating its absolutely fused
Okay I did it immediately after writing this😅
Why my ps5 is different from your
Hey thanks for the video! Although im having trouble on this piece at 8:15 !
Theres a small metal bar/attachment thing where im supposed to push down to release the ribbon cable.
I cant get the cabel out! 🙃
Ive come so far lol someone PLZ help!
My ps5 bricked🤩
fire 💯
I'd rather just take it to someone like you cuz I'm a lazy person
Same
Why do we have to go through all this just so our PS5 wont cut off mid-game
I know! Completely agree.
Dude i seriously need help and my comments arent loading @ 8:25
Theres a piece on my ribbon cable that wont allow me to remove it. A metal bar right where im supposed to push down to release. Its not in the video and im stressing out lmao
@joeydoestech I'm hoping you see this hahah I've so far in dismantling this thing
Hey there! Feel free to join the Discord using the link in the description of the video. That way you can upload some pictures/a video to help us help you. That metal bar should be there for you to push down, but maybe something else is going on 😁😁
Yeah I'm not doing this LMAO boi
Great video but im definitely not doing this my self it would be a great way to mess up my ps5 no not doing all this
It’s not as scary as it looks - minimal to no prior experience required- just make sure you have a safe place to take it apart and securely place your screws
I cant take the ps5 cover off💀
I ripped off my fan wire