@@user-om4hv2dg1w I would inspect the hoses really good make sure it doesn’t have any hair line cracks cause under pressure them hoses would expand and make them leak. Are they leaking all the time or only after you drive and then park the car?
@@user-om4hv2dg1w well if it’s coming from where the oil cooler joins with the block then change the gasket cause that’s the only thing in between there. K24 don’t come with oil coolers from factory unless it’s the newer SI MODEL K24 I believe so if you installed the oil cooler it is possible that the gasket could’ve gotten pinched and not sealed properly. If you do go ahead and change the gasket go ahead and put some Honda bond on the gasket so it stocked to the oil cooler so it doesn’t fall off the cooler when you go to install it. GOOD LUCK.
![ОРБАН приехал к ПУТИНУ и "отчитался" о поездке в Киев 😁 [Пародия]](http://i.ytimg.com/vi/_0ukDovOWq8/mqdefault.jpg)
What socket size did you use for the center bolt? And do you know if it's the same size for a 93 accord se?
I used a 30mm socket. Not sure on the accords.
how did you remove the threaded sleeve where the oil filter screw onto? If I use the vice grip, I will destroy it.
I use vise grip it’s not on there tight at all.
How did you remove the oil filter stud off the k24?
I just grabbed it with vise grip’s and twisted it off it’s not on there that tight.
Might sound like a dumb question.
But which of the two hoses has oil running through them ? (Connecting to oil cooler)
Both or none ?(only coolant ?)
It’s only coolant
Got it! Thanks
Also replacing gasket and hoses on oil cooler , I would have to flush both oil and coolant?
@@joseraya8998 yea. I would just add new oil and coolant.
Can coolant get into the oil if the oil cooler is broken?
@@user-zm9ze9dd8j it might be possible I’m not 100 % certain but it could possibly happen if it is damaged.
My k24 is leaking antifreeze out of the oil cooler you can it be a bad gasket?
Have you checked the 2 hoses? The coolant runs through there.
@@wisin_k20 yea there tight it’s just weird cuz I never had an issue with that so idk if it’s the gasket cuz it’s pissing out
@@user-om4hv2dg1w I would inspect the hoses really good make sure it doesn’t have any hair line cracks cause under pressure them hoses would expand and make them leak. Are they leaking all the time or only after you drive and then park the car?
@@user-om4hv2dg1w I don’t think it would be the gasket because I believe it’s oil that circulates through there.
@@user-om4hv2dg1w well if it’s coming from where the oil cooler joins with the block then change the gasket cause that’s the only thing in between there. K24 don’t come with oil coolers from factory unless it’s the newer SI MODEL K24 I believe so if you installed the oil cooler it is possible that the gasket could’ve gotten pinched and not sealed properly. If you do go ahead and change the gasket go ahead and put some Honda bond on the gasket so it stocked to the oil cooler so it doesn’t fall off the cooler when you go to install it. GOOD LUCK.