I did that once too....don't lose that locating pin it is tiny.... also good info for XR XL etc 2 valve 200's if the advance springs are rusty and shot ...I made 2 out of ball point pen springs,,,yes pen springs
I’m just about to strip one of these engines glad I saw this I’m curious if the cam timed with the crank how did it bend a valve ? Is it due to it firing at the wrong time ? I just assumed as long as the timing was mechanically right the pulse wouldn’t make a difference it just wouldn’t fire up
If the springs behind the pulse generator and that part your working on is broken will they caused it to struggle getting up to speed and struggle to start going
What's funny is I put my flywheel at the f mark perfectly, I pull off my pickup coil cover to find that it was almost exactly 180⁰ out... yet starts right up... is there something I'm missing?
@@localenterprisebroadcastin5971 there is two wires coming out of the timing blue and yellow when you crank the motor is there fire coming from the blue wire going to the dci
I did that once too....don't lose that locating pin it is tiny.... also good info for XR XL etc 2 valve 200's if the advance springs are rusty and shot ...I made 2 out of ball point pen springs,,,yes pen springs
That’s why dirt bike and quad techs charge extra to fix your mistakes
😂..💯…I’ve made a very good living over the years fixing other peoples mistakes…thanks for the comment and view 👍
THANK YOU!!!!!!!!!!!!!!!
I’m just about to strip one of these engines glad I saw this I’m curious if the cam timed with the crank how did it bend a valve ? Is it due to it firing at the wrong time ? I just assumed as long as the timing was mechanically right the pulse wouldn’t make a difference it just wouldn’t fire up
Very helpful!! Thank you!
Glad to hear thanks for the feedback 👍
nice info, ggz-👽👾👍
Great video! Hows the ATC coming along? get the lighting all squared away?
Yep just needed a ballast resistor to run the LEDs
I just rebuilt my Honda XR 200 and I was wondering why it wasn’t starting and this is why it wasn’t starting because I wasn’t lined🤣🤣🤣🤣
Just about to start it right now I’ll see if that was the problem Because I just did a top and rebuild on it
@@user-bo2uf9nc3q good luck 👍
@@localenterprisebroadcastin5971 fired right up after that 😁
Just got back from a four hour ride on it
If the springs behind the pulse generator and that part your working on is broken will they caused it to struggle getting up to speed and struggle to start going
Thank you for the information and the comment 👍
It has a line on the side that goes up.
How do you take the screw off the ignition rotor
Mine just unscrewed like any normal fastener 👍
What's funny is I put my flywheel at the f mark perfectly, I pull off my pickup coil cover to find that it was almost exactly 180⁰ out... yet starts right up... is there something I'm missing?
🤷🏼♂️ thanks for the comment thouh
Amigo que clase de cedei le puso le fusiona la moto bien
Yamaha blaster
Is there fire coming out of the blue wire when you crank it
@@rondesjardins5721 not understanding the question
@@localenterprisebroadcastin5971 there is two wires coming out of the timing blue and yellow when you crank the motor is there fire coming from the blue wire going to the dci
Can this cause a no spark
Possibly…it will definitely throw off timing