Hi ... I have a DSC system Alexor PC9155 with a WT5500 keyboard. I'm having problems with the WT5500 keyboard and I want to replace it with a new one. I would like you to help me erase the bad keyboard from the program and enroll the new one so that everything remains the same as before. How could you help with my problem ..... Thanks
*8 installer code, 804, then whatever zone it is =003, you see the serial number of the device, look on your new device for the serial number start out with 00 then the serial number. the new device is enrolled. That is for window or door sensors only.
@@cwgaines You just remove the old sensor and put a new one in. If it is wireless, then there is much more to it. Please follow the sensors directions.
My exterir foor is warped and is not aligning with the sensor. So it is locked but showing the yellow trouble light. So I bypassed the zone, but I get a beep and have to keep *2 to bypass but I want to delete the enti8re zone so I can quit the annoying beep from waking me up all night.
Bought a house with this security system, previous owner didn't provide a code. Tried to use master code which is provided in the book but wouldn't work.
I'm renting a house. Alarm is supposed to be off. They left no codes or information. Today the alarm is blaring and I have yet to find a way to turn it off!! We're going crazy!! How do I turn this whole thing off??
This is the BEST tutorial on UA-cam for the DSC. I have an older model but your tutorial was spot on!
This was so useful! Thank you for easy, concise and pretty thorough instructions.
🇮🇱
Yes, thanks! Very helpful!
Hi,
Please can you advise if you can have the wireless display to stay on at all times.
Thanks for the Tutuorial!
Good demonstration
Thank you
Is there a way to sound the alarm immediately if the door is open in Stay mode? Mine has a delay in both the Stay and Away modes :( Thanks
Do you know how to replace battery as it appears a warning to replace it
Hi ... I have a DSC system Alexor PC9155 with a WT5500 keyboard. I'm having problems with the WT5500 keyboard and I want to replace it with a new one. I would like you to help me erase the bad keyboard from the program and enroll the new one so that everything remains the same as before. How could you help with my problem ..... Thanks
Hello
How do you adjust the brightness of the keypad? It does not save when I attempt to adjust the luminosity
Does Neo power series keypad works with power servers panels like 1616 for example,
No. Neo keypads do not work with power series panels.
Can you tell me how to use system that doesn’t have the visible commands at top . Pleas help
How do you add or replace a window sensor that has went bad? So it is now assigned to a specific zone.
*8 installer code, 804, then whatever zone it is =003, you see the serial number of the device, look on your new device for the serial number start out with 00 then the serial number. the new device is enrolled. That is for window or door sensors only.
@@cwgaines You just remove the old sensor and put a new one in. If it is wireless, then there is much more to it. Please follow the sensors directions.
Can you tell me how to change the door beeb tone?
How did you turn the light off? Mine is in the bedroom and I'd like to turn it off.
how do I program the alarm to activate on and off at the same time everyday ?
Hi. i am trying to find the integration identification number so i can use the app, would you have an idea of how to find this. Thank you!
How to make an alarm sound while you are in? Like if you see something unusual outside
What if your system keeps beeping every minute even though there are no doors open? It shows the yellow triangle but there aren’t doors open
My exterir foor is warped and is not aligning with the sensor. So it is locked but showing the yellow trouble light. So I bypassed the zone, but I get a beep and have to keep *2 to bypass but I want to delete the enti8re zone so I can quit the annoying beep from waking me up all night.
All I have to say is ADC. But great tutorial !
Can anyone explain to me what (071) First User Display Mask and (072) Second User Display Mask do?
Please help me how to rename zone label
How to add wired glass braker detector
The detector will come with direction on how to do that.
My unit is the same
The ONE thing I wanted to see was how to turn off the keypad light! Anyone know how????
Bought a house with this security system, previous owner didn't provide a code. Tried to use master code which is provided in the book but wouldn't work.
Hi, I have the same problem
I do too,it wont even come on
I'm renting a house. Alarm is supposed to be off. They left no codes or information. Today the alarm is blaring and I have yet to find a way to turn it off!! We're going crazy!! How do I turn this whole thing off??
@@mkh0lt remove the wires in the dsc panel, its on the far left a/c power.
@@mkh0lt Unplug battery and the alarms power supply.
what if I don't know the master code
You can reset the master code but you will need the installer code.
Ineed it badly