DSC Power Series Programming - Alarm System Store Tech Video
Вставка
- Опубліковано 7 січ 2020
- Ryan Malanoski of Alarm System Store steps you through the basic programming of a DSC Power Series alarm system. Follow him as he guides you in setting zone information, delay times, and many more steps of the basic programming of this alarm panel. He also introduces you to our quick start guide which makes programming very simple compared to the manufacturer's manuals.
Please comment in the comments section if you have any questions and be sure to slap that like button and subscribe to our channel for all of our how to videos for some of today's most popular DIY security systems.
You can also visit our website at alarmsystemstore.com for all of our great deals on security equipment.
You can also follow us on the following social sites for information, coupon codes, and much more!
Facebook - / alarmsystemstore
Twitter - / alarmstore - Навчання та стиль
![Lp. Последняя Реальность #107 РОДНОЙ ДОМ [Финал] • Майнкрафт](http://i.ytimg.com/vi/IK3QKzKUlHM/mqdefault.jpg)
This is so very helpful. Thank you for this excellent tutorial.
You are most welcome. Glad you found it useful!
NOTES
03:22 Entering Programming Mode [*6], And Setting Time & Date [[24 hr format] hhmm mmddyy]
04:36 Entering Installer Mode [default password: 5555]
04:52 Entering Zone Data [001 & 002]
05:54 Toggling Zones [202]
06:21 Entering Partition Data [005]
07:33 Entering Resistor Data [013]
08:09 Setting Telephone Reliability [015]
08:58 Quick Start Guide
09:20 Setting Master Code [007]
09:48 Getting Orange Triangle Data [*2]
10:12 Conclusion
Thank you @Eugene Wong
Legend good job
Very very nice. THANKS
Can you help me for programming .
Thank you so much
Thanks for the info. I bought a new remote (same as I currently have) and need to code it to the alarm system which has already been programmed. Can't find instructions on how to do this.
Adding a wireless contact, I inadvertently made my front door (Zone 1) to show it being open, when in fact the door is closed. How do I go back and correct this to show that the door is closed or open correctly? Thank you!
any video on how to add zones to partitions?
How do you program the keypad on a dsc so it doesn't beep when the ac power goes out?
Hello
How do you adjust the brightness on the pk5501? It seems to not save my brightness level. Keypad is dark.
We purchased a home with a media panel and this alarm system with motion detectors. I unplugged it because we had no information on how to set it up. It has been 9 months since we moved in and now I am ready to tackle this installation. HELP!!! I have no codes from the previous owner and I really am not sure where to begin, other than plug it back into the media outlet and I have the alarm box as shown above. I don't really even know what else to do. I would really appreciate any help. Thank you.
Hi - can anyone advise how to set a DSC LCD 5511 stay mode to have a delay of 20 sec if activated - my alarm has been set to activate with no warning - people keep opening windows - and alarm activates straight away thanks
Pls tell how to connect bentel bgsm 120B gsm module to DSC 1832
Tack
Help needed please. I cannot set my DSC alarm in stay mode, what setting do I need to look at TIA
Press and hold the stay key (or the house with a person in it,for international keypads) and it should arm to stay
How to programing 2 keypad difference funtions ??
My 5500 keypad displays low battery key 2. Cannot find key 1 in 804 any help finding key 1 and key 2 locations.
Also moved this keypad from my old house to my new one. Used to display open zones but doesn’t now?
Can anyone explain to me what (071) First User Display Mask and (072) Second User Display Mask do?
When i try to go in enrollment mode 898 or 804 it just backs out and says enter section again... please help??
Is there a way to stop the external strobe beeping when you turn the alarm on and off?
Strobes dont normally beep so I assuem you are talking about a siren doing this. Yes, the option is called "bell squawk on arm / disarm" It is off by default though. This is in program section 014, opt 1.
Using pk5501 followed the quick start and video. Have 4 zones. 1 being front door (delay), 2 interior door (instant), 3 motion (set to 5), 4 interior (instant).
My motion does not work. Thought it was a bad sensor and changed. Same result. Is there something I’m missing? What should the attributes on this be?
Generally you don't mess with attributes for a hardwired zone.
@@AlarmSystemStore any ideas why it does not operate? I checked, and I have 12v at the board, and terminals are nc/c
How would I program/re program just the motion w/o erasing the system. Thanks btw
Would have been nice if he would have showed the whole keyboard so you could see what he was doing.
Good evening anyway i could contact you directly, to help me with a my homes systems?
My zone with the magnetic contact has the green check mark but doesn’t turn off when the contact is disconnected. Its not sending a signal when open. Any ideas?
When I power up the system and connects the bell I get a low yelp alarm from it. When I measure the bell output I constantly have about 12 V from the output. If I trigger an alarm the siren works att full volume so the system seems to work, but I cant get rid of the low volume alert sound! Any ideas what to do?
There is always supervisory voltage on the bell output. Generally the siren is not sensitive enough to sound from this. If it does though, you will need to add a resistor. I don't recall the value off hand but I'm thinking it's a 1k.
@@AlarmSystemStore I used a resistor and now it is quiet :) Thank you for your videos, I would have been lost without them 👍👍
@@AlarmSystemStore , I´m almost done installing my home security system :) The only thing that´s not working is the telephone dialler. I haven´t got any landline, only an old GSM dialler (Ericsson TS90) but I can´t get it to dial my phone when I trigger the alert. The display shows communication error and there are two cables on the gsm-dialler that´s not attached to the board... I havent got a clue where to attach them. Any ideas what to do? If I call the dialler from my cellphone I can see that the small light on the gsm-dialler changes, so it´s indicating that the sim-card connection works anyway..
Question my dsc go off even night at 12:41 am with me sitting it someone told me it may be scheduled please help
i cant find the quick start guide 😔😔
www.alarmsystemstore.com/pages/programming-quickstart-guides
I have a dsc wired motion sensor that I want to remove. Can I just jump zone 1 to com and remove the wires. I do not have the installer code.
Yes that would work assuming your panel isn't using resistors. If it is however, you would need to use a 5.6k resistor to jumper it there.
my dsc is showing gen system temp, what does this mean?
Hi! I changed my SIM Provider, removed the SIM PIN, yet I get the following troubleshoot message: Cellular Trbl, Alternate Communication. I have contacted the Phone Provider, and there is active signal on the SIM. Could anyone please help? thanks!
I need to know what your profession is. I don't know how it is called in English. Thank you
theyre an alarm technician!
How do I reprogram after canceling our monitor service to stop sending signals to avoide the error code 4 ? The person keeps saying we need a service call or get monitoring again. Can I just disconnect the communication wire?
Unplugging the phone cable will still generate the FTC / Comm error. Only way to resolve it will be to deprogram comms in the system. If you don't have the installer code though you will be unable to do so.
@@AlarmSystemStore is there a way to find the installers code? The installer will not provide me with the number can I factory reset?
@@straighttothepoint364 UA-cam "DSC factory reset". If it's had installer lock enabled though it will not reset the code and there is no way around it.
@@AlarmSystemStore so that's how this guy scams another service call...ill leave it unpluged
You video is great. Only you did a lot of unnecessary talking for the first 3:30 of this video. Once you started teaching it was great.
I inadvertently made several Zones to show them being open, when in fact the doors/windows are closed. How do I go back and correct this to show that the doors/windows are closed or open correctly? Thank you!
instablaster...
I have a DSC system with three keypads, three partitions and a RF repeater. All I have to do is delete a zone in trouble and learn a new one in. I tried all three keypads and my programmer and could not get into programming. I press *8 and it says, "INVLID ENTRY" before I even enter the installer code. I am going back tomorrow and I do not want to have to swap it out
I could see getting that after your code is entered, but I've never seen it display that from simply hitting *8.
I think it was because one of the partitions was armed
@@bobwalton4630 Ahh yes that will do it too.
sir , what is the code for PIR sensor with exit delay?
All zone types will provide an exit delay, but if you want a motion to be stay and away capable as well as have an entry delay you would use an 06 type.
@@AlarmSystemStore Thank You sir, and one more , How to label each zone to identify?
@@ajithk.a5556 This is done in keypad programming, assuming that you have a full alpha model keypad. I don't believe we have a vid on it but I will add it to our list.
@@AlarmSystemStore I don't have full alpha keyboard. I watched your neo keypad video, Is that zone labeling settings same as above green light keyboard?
@@ajithk.a5556 If you don't have a full alpha pad you can't program zone labels.
My magnetic contact has the green check mark but doesn’t turn off when the contact is disconnected. Any ideas?
Too many possibilities to really explain each here but.. programming, wiring, contact itself, zone def used. You really just need to explore each. If you have multiple contacts on one zone, perhaps you've wired them in parallel rather than series.
@@AlarmSystemStore ive checked the wiring and the contact itself. Any ideas on zone definitions? What zone definition is for a magnetic contact that stays on?
@@Yeahitsmeagain92 Any zone def that has force arm on such as the stay / away types will always show green like that.
Skip to 4:50
You missed the easy way .... FLOW Chart programming of the panel ... no manual required ..... it flows to each section like the manual reads but o the LCD keypad .... POWER series PK5500 lcd brought it out first but never advertised the feature ...
Dear sir can you provide PDF file for programing
keypaid error showing 1 2 3 4 5 6 7 8 and please suggest how to resolve it
Please reply
@@mukeshkumarsingh3265 Programming guides www.alarmsystemstore.com/pages/dsc-power-series-pc1616-pc1832-pc1864-quickstart
How to program dress code
There is no dress code for programming. Wear whatever you wish when programming, LOL.
The duress code is programmed in *5 menu just like a user code. Just make it a duress by enabling attribute 2 in the user code section. We have a video about user codes in our play list BTW. Not sure it specifically addresses duress codes but like I said a duress is a user code with option 2 enabled so it's pretty much done the same.
How to remove partitions selection? Even I did hardware reset and system reset it always appear, it's hassle you need to choose from partitions 1 to 4
There are several steps to partitioning a system, most of the programming step in the panel. There is one however in the keypad programming and that is why resetting the system didn't resolve it. From this particular keypad you need to go into keypad programming 000. Going off memory but I believe you hit 0 again to get to partition and slot which is where you change the partition that this pad is assigned to.
Phone line
most dsc are ''blind'' where am from what a horrible thing xD
Καλησπέρα πος μπορο ΝΑΤΟ βαλο να χτυπάει στο κινητο
I'd rather have my home burglarized.
What an awkward dated system
Not nearly as much as Honeywell. The Vista is technically an antique I believe.
@@andybowman9697 the vista is very reliable though.
@@1990notch and you plug in your programming keyboard and boom done while most dsc are ''blind'' horrible to program
Horrible place to buy a product. The support folks lie about products being a direct replacement. I bought 4 Smoke Detectors that were not NOT a direct replacement. Lost money and buyer beware!
Rick, the 4WB series is indeed the replacement for the old 2412 series. Call System Sensor yourself and ask, we're not lying. No one here is commissioned or incentivized to do that anyway... check yourself www.systemsensor.com
Nonetheless, submit an RMA here and we'll refund you. We are an honest company.
www.alarmsystemstore.com/pages/return-authorization-form-rma
What a horrible description on what zone type to use for motions. It should be a zone type 4 Interior follower. If you program as 5 and your walk across your living room to turn off your alarm by the front door the alarm trips because you walked in front of the motion that has been programed as an instant. The interior follower knows you've open an entry exit zone and will give you time to disarm BUT if you come through a living room window and walk in front of the motion it goes of instantly because you did not open an entry exit zone, and yes they will also shut off when armed as stay.
Might wanna brush up on your DSC zone definitions. From the manual:
[05] Interior Stay/Away: Similar to ‘Interior’ except that panel will auto-bypass the zone if Armed in the Stay mode
05 is in fact an interior. The only differnce is it allows you to automatically bypass in stay mode in case you want to arm at night and walk around without tripping the motions. 04 is generally only used in commercial where that is not needed.