Steel and Pine Hammock Stand | Building a Sturdy Hammock Holder

We made a hammock stand from steel and treated pine. This hammock stand is sturdy, stable, and easy to make.
We followed Peter Brown's design for this build.
It can be found on his Shop Time video entitled Steel & Redwood Hammock Stand:
• Steel & Redwood Hammoc...
The Process:
We started by getting two pieces of steel from our local welding shop. Both pieces were pre-cut to two feet in length. We cut each one into two four inch pieces and then measure seven inches from each end placing a sixty degree line between the measurements. We then cut all the pieces using a grinder and cutoff wheel. We tried using a reciprocating saw, and although it did work, it was hard to control and keep straight. Once the steel was cut, we cleaned all the pieces, again using the grinder, but this time with a flap sanding disk. We then used an arc welder to weld all the pieces making sure to tack one side first to prevent warping. We then cleaned up the metal and painted the brackets with primer, and then black paint. We drilled four half-inch holes, one for each arm. We then bought four by four treated lumber from our local hardware store. We purchase two eight foot long pieces, and two six foot long pieces. We cut two foot sections (four of them) out of one of the eight foot long pieces. We then stained all the pieces using dark wood stain. We should have used exterior grade stain, but we didn't want to make another trip to the store. We then assembled it all using bolts and washers. Finally, we enjoyed our hammock stand.
If you enjoyed the video please give it a like and let me know your thoughts in the comments below.
If you are interested in more, please consider subscribing!
/ makerintraining
If you want to help keep me caffeinated (and my son full of gummies), consider supporting me!
/ makerintraining
Safety note:
Be careful with metal working/welding, seek help if its new to you.
Music by Jeremy Blake
Song: Exhale
ua-cam.com/users/audiolibrary...
My Social Links:
UA-cam: / makerintraining
Instagram: / makerintraing
Twitter: / makerintraining
Patreon: / makerintraining

[@bluebubblepremium5204]

Amazing

[@weini1988]

good design, and so great job.

[@mikelisafaidley3026]

nice

[@TrevorHigginsDustysqueak]

Solid! And you solved the “how do I store this?” problem. Thanks for showing the good and the bad when cutting or welding.

[@zrugel]

Oooooo very nice. this is a great project.

[@sensen7973]

looks great... nice job! How long are your legs, base and risers? thanks

[@Flan-dy4od]

كمل كفو gob👍🏼👍🏼👍🏼👍🏼

[@ZealousPolymath]

First :P