To mount it tight you can use a Hose clamp / Schlauchschelle - actually 2 of them. To make it black you can disassemble the clamp and place heat shrink tubing on it. Or you can get stronger zip ties and a tool / special plier that stretches the zip ties a lot stronger than a hand can do. Under that all you can place a piece of inner tube or some other piece of rubber.
One thing that may be worth mentioning is that if one wants to mount this product on their stem, they'd want to make sure there's enough space (I believe 50 mm) on the stem. I bought it without checking (duh), and as it turned out, even though my stem is 80 mm long, the mount wouldn't fit because of the screw holders of the stem that stuck out. I ended up using it for another bike, so that's all good in the end.
U can probably try to push down and up on the mechanism and it will probably losen up or spray some silicone spray inside the black/blue part that goes down and up to relese phone and it will probably losen up and work normaly after that
Ur legit the only guy who even mentioned if they do not have a case for your phone u can buy the universal adapter legit every other video says too bad u shoud have got a beter phone lmao
To mount it tight you can use a Hose clamp / Schlauchschelle - actually 2 of them. To make it black you can disassemble the clamp and place heat shrink tubing on it.
Or you can get stronger zip ties and a tool / special plier that stretches the zip ties a lot stronger than a hand can do. Under that all you can place a piece of inner tube or some other piece of rubber.
Thank you for the idea! I also use pliers to tighten the zip ties because with ones bear hands it’s not very secure.
One thing that may be worth mentioning is that if one wants to mount this product on their stem, they'd want to make sure there's enough space (I believe 50 mm) on the stem. I bought it without checking (duh), and as it turned out, even though my stem is 80 mm long, the mount wouldn't fit because of the screw holders of the stem that stuck out. I ended up using it for another bike, so that's all good in the end.
That is a bummer! Thanks for letting me know!
U can probably try to push down and up on the mechanism and it will probably losen up or spray some silicone spray inside the black/blue part that goes down and up to relese phone and it will probably losen up and work normaly after that
I actually tried that out after posting the video and since then it worked flawlessly!
A well done video and very informative. One will have to thank you for that :)
Thanks @Jan B ;)
Very informative, Thank you for that
Ur legit the only guy who even mentioned if they do not have a case for your phone u can buy the universal adapter legit every other video says too bad u shoud have got a beter phone lmao
Terrific review, thank you.
“One” has done a good review
Great review 👏
I like your torch setup. Do you have info on where to buy that?
Sry, I am not quite sure which light you mean...?
@@jeremyw.465 at 3:50 the light you're attaching to the handlebar. The strap and light I was curious about.
can you installed vibration damper on this mount?
I haven’t tried it out but I have heard that it is possible ;)
I’m surprised that you have to use two hands to put on and off the phone. Should be twist like Garmin mounts. Nope not worth the price.
SP-Connect, much better and waaier to Mount with just one hand.
I wouldn't say It is better in any way... Can you tell me anything that is better?