How to install Shingle Ridge Cap
Вставка
- Опубліковано 29 лют 2024
- installation of roofing shingle ridge cap . peak of the roof.
#Roof #roofing #shingles #shingleroof #shingling #house #project #work #Remodel #fixerupper #reconstruction #job #construction #newconstruction - Розваги
That is exactly what I needed to see so I can add that to my list of construction knowledge!
Good! Happy constructing!!!
Cut them square,fewer cuts no scrap and the square edge helps line them up.nice hitahtci gun.also pop a line,and also nail on the tar line.two nails per cap.
You didn't show the most important part, where the three runs come together.
You are right. I also didn't have the finishing cap. Next roof I do, I'll try to make sure and get that.
Do you.need to.heat the tar strip so.they all get stuck down
Overtime it bonds together with the summer heat.
Well done. thanks for
Thank you,
For support, please subscribe if you haven't.
Had a roofer tell me it was "against code" to cut your own caps. Who's got a code reference for me???
Probably varies per state / county. Could be, but I wouldn't see why. so I honestly couldn't tell you.
lol
magkano 1box ng shengles.
Depends on the kind of shingles you want.
You are cutting way to much off of each side of the caps. A 1/4" is more than enough. The reason that manufacturers make pre-made caps is so that there are 4 nails in each cap. And you don't cut the outside factory edge. The way your installing each cap is only getting 2 nails.
4 nails on each side!? Seams like more then needed...
Good to know bout the ¼" as I was just eye balling cuts.
@NYAG When you use 2 nails they catch the previous cap thus holding each cap with 4.
Buy breakaway bum