as always, the setup processes and the choice of technological processing modes remained behind the scenes!) Thank you for the opportunity to witness pure craftsmanship! Good luck in your work, guys!
Dobry den pane Miro. Pěkné video, chtěl bych se jenom zeptat, jakou barvu mají mít hrubovaci špony z železa. Jestli jsou lepší tmavě modré/fialové nebo žluté/zlaté?? Dekuju za odpověď💪
what a lot of work! ! ! ! ! what did the master workers who had to make similar parts do before the advent of CNC and other machine tools???? I hope that all this mass of metal shavings have "returned to the motherland"....... the foundry! ! ! moreover the final piece was lightened by how much???
Great job! But I wonder why the block of steel has to be moved to another machine every time. It has to be recalibrated every time it is moved. Wasted time?
High feed such as this IS faster and cheaper on tools for mold making, and you can accomodate longer tools because cutting forces are mostly axial, not radial.
Material hardness and tool life vs cost per edge. $450 end mill might make it 2 hours where the $18 worth of insert edges will also last at least 2 maybe up to 4 hours in cut. Might be a little different mrr but tooling cost is where it’s made up.
@@viliusr6974 ..don't get me started on this trump thing. No educated thinking person I know voted for him, and I sure didn't. It's just because of the electoral college voting system and the fact that large parts of the country are filled with inbred unthinking morons. They don't want to think about overpopulation, about responsibility, about anything other than themselves and whatever fake god they believe in. What really concerns me most is who comes after trump...Because if the country again elects some dimwitted greedy industrialist into office, it starts this country on a very dismal downward path.
I have designed many aluminium castings, forgings and injection molded parts over the years. Not a single time I saw the tooling to make those parts. If the manufacturer says the part is manufacturable and they are happy with the design, design engineers extremely rarely see the process itself.
What a beautiful piece😮
as always, the setup processes and the choice of technological processing modes remained behind the scenes!) Thank you for the opportunity to witness pure craftsmanship! Good luck in your work, guys!
That took more than one shift, thanks for sharing such a challenging part. Have a good weekend. Charles
COOL job!
Phew! I can only imagine the amount of hours it would take for me to both program and run that part... 20-30 hours? 😅 Nice work
加工效率太慢
Thank goodness for the computer would not like to do that manually
LOOKS GOOD 👍👍👍👍👍👍HOW LONG MACHINE TIME RUN CA ??
A very very long time😀
@@CncFrezar yes 4-5 days i think
Very nice and complicated! Lots of tooling and many hours.
Parabéns pra quem fez esse programa. Muito legal!!
That’s amazing! When it went back the lathe was that for a heat treat?
yes
That's absolutely beautiful.
We think that a block of steel is beautiful. We are such nerds :D
Damn that central part got pretty crazy
I like your work very much
예술의 경지군
Reminds me of something from a fluidic computer or automatic transmission. I keep imagining fluid passageways.
What is it? What has so difficult form?
Very nice ❤
А что за деталь?
Матрица для штамповки/отливки?
Very impressive.
Мощно! Сколько времени потом затратили на полировку?
я не знаю точно
Impressive
wowwwwwww ❤
Is this something you can just leave to run overnight or do you have to babysit it the whole time?
I prefer to always be around
Классная работа!!!
Dobry den pane Miro. Pěkné video, chtěl bych se jenom zeptat, jakou barvu mají mít hrubovaci špony z železa. Jestli jsou lepší tmavě modré/fialové nebo žluté/zlaté??
Dekuju za odpověď💪
Ďakujem. Zvláštna otázka. No hlavne aby mašina veľmi neplakala 😀. No čím mäkší materiál tým Belšie špóny ale závisí to aj od plátkov ...
@@CncFrezar dekuju za odpověď Ja to vždycky nahulím jak bejk😂😂😂
👍👍👍
What was the cycle time on this?
Hi. Unfortunately, I can't talk about that
Kolik se to pokroutilo po hrubování? A pak po tepelném zpracování?
Asi 0.5mm
what a lot of work! ! ! ! !
what did the master workers who had to make similar parts do before the advent of CNC and other machine tools????
I hope that all this mass of metal shavings have "returned to the motherland"....... the foundry! ! !
moreover the final piece was lightened by how much???
Yes! As it happens in every workshop ;)
What material is that?
toolsteel 1.2343 or H11
Great job! But I wonder why the block of steel has to be moved to another machine every time. It has to be recalibrated every time it is moved. Wasted time?
👍👍👍🤘
no carbide drills?
Hss
@@CncFrezar carbide just not worth it?
@@cyber2526U-Drills seems a better choice in this case
@@ov3753 still carbide technically
how do you measure that major i.d. ...huge calipers ??
Touch probe
how long needed for running Program, 60-80hours?
Hello. I am a programmer. I'm learning. I love mold parts. Can you share the model? 👋
Whi not use a 5 flute endmill and create a dinamic milling program, it would decrease your machining time by a lot. Still a beautiful work🤩
High feed such as this IS faster and cheaper on tools for mold making, and you can accomodate longer tools because cutting forces are mostly axial, not radial.
Material hardness and tool life vs cost per edge. $450 end mill might make it 2 hours where the $18 worth of insert edges will also last at least 2 maybe up to 4 hours in cut. Might be a little different mrr but tooling cost is where it’s made up.
Look at the machining center being used. Probably not great for high speed machining (no offense Frezar)
👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
At least one part on this channel must be for Asml euv, pure mass to resist vibrations, noise
What is this thing ?? It looks part like a press mold and part like some type of heavy-duty automotive part
It's an aluminum mold
@@CncFrezar that's great 👍👍 what it is used for ??? Is it some type of automotive related mold ??
❤
What steel
1.2343
Sometimes its called WCL :) Not the same as a WC, although some people believe that both have a lot to do with poop.
А почему он без масла точет, инструмент бы не тупился
"im supposed to make money on this... but i think i'm going to stick it on the bonnet of my car..."
и что это за деталь такая?????
Tennessee floor finish
Что это такое сделали?
Колесо
steel 1.2343 ?? Don't you mean 4140 or 316 or....
I mean steel 1.2343
Equivalent to H11
The earth does not spin around usa. No matter how narrow-minded the free folk are.
@@viliusr6974 ..don't get me started on this trump thing. No educated thinking person I know voted for him, and I sure didn't. It's just because of the electoral college voting system and the fact that large parts of the country are filled with inbred unthinking morons. They don't want to think about overpopulation, about responsibility, about anything other than themselves and whatever fake god they believe in. What really concerns me most is who comes after trump...Because if the country again elects some dimwitted greedy industrialist into office, it starts this country on a very dismal downward path.
What puzzles me the most is how the hell designers come up with these weird designs.
I have designed many aluminium castings, forgings and injection molded parts over the years. Not a single time I saw the tooling to make those parts. If the manufacturer says the part is manufacturable and they are happy with the design, design engineers extremely rarely see the process itself.
Секс)))
as a cnc repair guy i can hear things, u wont hear....
Aint gonna be hearing "things" through a phone microphone, and the air blast, and shitty speakers lol
Repair guy always out to rape someone
No cooling liquid crappi steel
❤❤❤❤❤
Цена вопроса тыщ 50 евро ?😂