Відео

hello, thanks for the instructions and great video. Im trying to restore my own cam, same model. Mine is not as bad as your, but some capacitors need to be replaced as well. I am struggling to find the right capacitors online, could you recommend me a website to get all the components? Thanks again for the video

Best idea is to solder the 4 joystick pins housing FIRST. to keep the housing flat. Then work on the other pins. That way the joystick is flat during the whole soldering process. Don't go from left to right of all pins. You can tell the four housing pins are the ones in a square shape point. X figure solder them. Then you can work on the other pins. This'll keep the joystick housing stable while you work on the other pins to solder down. The biggest problem with doing other joysticks say like Xbox to Wii-U. Is those have a different type of tension/friction systems then the Wii-U's will. You'll notice that the stock will have a much smoother and free moving silk movement. While Xbox will have a more 'drag' feeling effect that sure you'll be able to feel the direction more and have a more dead stop. But it won't be as clean feeling as the stocks. The best choice would be to buy some OEM Wii-U Gamepad joysticks with the board. Desolder those and resolder the new ones onto the controller. That way you'll get the exact same feeling joysticks with a refresh performance. But in the end if you like the Xbox feeling joysticks and want a more Wii-U controller style. This video choice would be the option. It'll feel bit weird at first that you'll feel again more of a xbox style joystick friction and tension. But if you wish to play more PC related games using a May-Flash adapter or so. This type of Controller will beat any others by far.

I replaced both and they still don’t work haha

I lost the black things for mine

This was really helpful.. thanks

Nice work..Old amiga computers deserve some love.

Ah, the poor thing really needs some love.

Adoro il lavoro che hai fatto all'A500,eseguito con molta cura.A500,best seller commodore!

U don’t need the rubber it’s just to keep the Metal from scratching the plastic I use a mic with no rubber sounds normal and works

Thank you 👍

Soy fans de SEGA! Ahí te sigo y recomiendo, si querés mira lo que hago. Saludos y éxitos

Hey man, i bought the same one a while back at a thrift but i cant find the mic cover, whered you get it?

It just bugs me that I can't see the battery life on this controller😡

Are model 1 controllers build the same

That's heavy 15lbs

The button to toggle the mic's mute doesn't work, a crappy repair shop broke it, is this something I can fix on my own? Any idea what I should do?

Any ideas on where I can find a shell to buy? They seem impossible to be found

What a great video! I always wondered what components powered that game console.

Where can you find the rubber part of the PlayStation microphone?And if you use the playstation microphone without the rubber part is it dangerous

Used your video to fix my controllers mic. Had an already broken PS5 controller and just swapped out both mics. Works like a charm now.

Interesting. They do look better for sure. Sometimes its the connector at fault, not the hand unit and its possible to dismantle the whole connector and resolder the wires to the pins and push them back in. You dont need the tri-wing screw driver for the connector.

Fuck sake. Not sure why, but I threw away the broken ribbon with the rubber part. Now I just have the replacement ribbon and no rubber part! ARRRRRGGGH!

Ohio

I couldn't sent it to u could i

odd question but if i say cut the mic cable will that make me un able to put a headset into the ps5 to use instead? i dont trust it to be muted when it says its muted

The CCD-F500e was my favourite Video8 camcorder (composite video + mono audio) after the F330e and F340e / CCD-SP5. Elco's where an issue 2 years after release of these camcorders. Common failure was also loosening the tapeguides in both directions. The most reliable camorders regarding elco's where the early models CCD-M8, M10, V30, V50, V90, V95 and the EVC-X10. Repaired all Video8/Hi8 camcorders up untill the CCD-V800e for Sony Netherlands (employee 1983-2010)

A very helpful video! Thank you for making it. This is the model I own. Definitely saving this.

No, my issue is my mic doesn't work when it's plugged in I accidentally knocked it out the port and now the plug in wont work, anyone know how to fix that?

I love your lisp

I assume this guide will work for all these series camcorders, and any differences between PAL and NTSC will be obvious to the eye? I have several of these and love them, and have been looking high and low to find a walkthrough on what they need, where and why. Thank you for doing this, i hope more of the people watching this will put the work into theirs, these units are worth it.

Idk where you went to brother but i am currently binge watching your stuff, its amazing, love your voice brother ♡

Everything about this video is top notch

Kick 2.04 in Rev.5 board needs a jumper wire between pin 1 and 31 (better double check my statement). I had the same issue.

Where did you find the replacement thumbsticks?

Thank you, I was fixing the stick drift and the mic fell out and I didn’t know how to put back in as the black rubber came off 😂

this was WAYYYY easier than expected

I had a BBC Micro at school, its still crazy how simple these computers were compared to todays computers

Hi guys ,not sure if this was said in the video but if you have a recent controller you may want to search for "v2" replacement cables. From what i read the v2 cables should work with a v1 controller but not the opposite. Hope it helps

Hi. Can I ask, with that composite mod, how did you find the brightness? Many people have said that the single transistor circuit is too low volage and doesn't produce a bright enough signal. Most of the mod boards I've seen, use two transistors.

Amiga 500 🥰🥰🥰🥰

your the man bro.....Peaccccce

Dang I've visited numerous videos about this but not a single reply from any of them....still having the same issue

So ,the old capacitors they look fine on you board ,the one I have they look older ,they are not that nicely covered they look like straight up bullets ! It was manufactured in France .

Nice video!

Ayúdame soy de México se me ronmpio el cable del nunchuk

Where can I find the schematic?

Do you know how to remove the handle? I have one pico with a handle that is in rougher shape that I'd like to put on a nicer unit.

and Part 2??

I have a question, is it necessary to have those control flexes for the control to work? Because I am not interested in the control but one of those flexes broke and now the control flashes yellow 3 times and does not turn on.

Wow thats great work and time and it works great videos