Sony CCD-F500 Restoration - Part 3 - 4K
Вставка
- Опубліковано 21 лип 2024
- Watch Part 1: • Sony CCD-F500 Restorat...
Watch Part 2: • Sony CCD-F500 Restorat...
This is the third and final part of the restoration of the Sony Handycam Model CCD F500E. In this episode we will continue to restore the camcorder by cleaning the shells of the camcorder and recap the viewfinder.
Capacitor list for all boards - Please note: F500E region boards will differ to ones released in other parts of the world.
- SENSOR BOARDS -
Sensor
3.3uf 50V
22uf 35v
47uf 6V
10uf 16v (X2)
Encoder board - Side A
100uf 6V
22UF 6v (X4)
4.7uf 35V
120uf 6.3V - Though hole Capacitor
Encoder board - Side B
22uf 35v
22UF 6v (x2)
47uf 16v
10uf 16v
- VIEWFINDER BOARD -
1uf 50V (x2)
220uf 6.3V
- MAIN BOARDS -
Top board:
220uf 4V
100uf 6.3v (2x)
100uf 4v
2.2uf 50V
1UF 50V (x6)
47uf 6V (x3)
47uf 4v (1x)
33uf 4V (2x)
22uf 6v (x10)
10uf 16v (17x)
4.7uf 35v
6.8uf 35v
Bottom Board:
22uf 6v (x11)
10uf 16v (x10)
47uf 16v (x2)
3.3uf 50v
4.7uf 35v
100uf 6.3v
82uf 10v (x3)
Have a unwanted item you want to donate to the channel, get in touch: contact@jakemcneil.co.uk
Gear I use for all my restorations:
Screwdriver Set: www.amazon.co.uk/iFixit-EU145...
Holife Soldering Station: www.amazon.co.uk/Clossity-Sol...
Duratool Solder Wire 60/40: www.ebay.co.uk/itm/142373084888?hash=item212618ded8:g:hkcAAOSw~y9ZDE2e&amdata=enc%3AAQAHAAAA4OOfWtOMtTgI%2FO93WKRhRo9rmd4DSHJmzLtuS232fORn%2B6vxY6DLldFFFm9Y5W3iK83JDtu%2BOBtVLntiQ8O0vezK9WT6thaQy26o1urXQwrKAFGhI9Cas3l37cgEzc5y7N5UEdF1Jo2fh%2FuP5%2F5kofPrv3ZMbNUvCKoD0kks3uLpufKyuv5D0ExuhKMyBwAfdnzg5mDsrnI335yof0yTE17HnwCIh%2B3nkheCww61soGFxpwS5u7zDRtalk%2BnmgTPHS9aY1OmRv%2B0lTQF7FXhacgEdMZwOJNtXKN7yRCe4YaY%7Ctkp%3ABFBMiNO6t8Vg
LTronics RMA-223 Flux Paste: www.amazon.co.uk/RMA-223-Grease-Syringe-Solder-Soldering/dp/B07Q31D3SZ/ref=sr_1_1?crid=3RDFNE8HJUNN4&keywords=LTronics+RMA-223+Flux+Paste&qid=1658586746&sprefix=ltronics+rma-223+flux+paste%2Caps%2C49&sr=8-1
MG Chemicals Desolder Braid: www.amazon.co.uk/MG-Chemicals...
Echanic UV solder mask: www.amazon.co.uk/Mechanic-GY-...
IPA: amazon.co.uk/ChemDistro-Isopropyl-Alcohol-Isopropanol-Disinfectant/dp/B08L596XRC/ref=sr_1_1_sspa?crid=2O2DNOZEZU531&keywords=IPA&qid=1658587090&sprefix=ipa%2Caps%2C64&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExTVdTOFBHUUFMVjVBJmVuY3J5cHRlZElkPUEwODc0OTkxMkNaTjM1MVREUjAwMiZlbmNyeXB0ZWRBZElkPUEwMDAzNDUwMlJQWDNZVVFVVUhORyZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU= - Наука та технологія
The CCD-F500e was my favourite Video8 camcorder (composite video + mono audio) after the F330e and F340e / CCD-SP5. Elco's where an issue 2 years after release of these camcorders. Common failure was also loosening the tapeguides in both directions. The most reliable camorders regarding elco's where the early models CCD-M8, M10, V30, V50, V90, V95 and the EVC-X10. Repaired all Video8/Hi8 camcorders up untill the CCD-V800e for Sony Netherlands (employee 1983-2010)
Just watched the first 2 and then you dropped this 😳😳😳
That before/after restoration image quality comparison was amazing! Well done for persevering and achieving this 👏
I love how much afford youre putting in your videos
Thank you for watching them, I appreciate it. :-)
Great to see this camera once again go up and running!! Congrats on the entire restoration process
Thank you Cyclone Cord, appreciate it. 🙂
how is the F500 doing now?
I would honestly get totally overwhelmed with all the boards and wires and capacitors so major props to you for being able to completely restore it
Thanks for watching the videos and the comment, really appreciate it. It was overwhelming at times the amount of board and wires there were, especially towards the end when putting it all back together.
you missed to show two essential steps , tape guide alighnment and greasing the loading mechanism/tape brake arm
You're right but maybe they where fixed and locked by service before it was sold as 2nd hand. Sony technician Betamax, Video8 and Hi8, Sony NL.
The Dedication in this videos are 💯💯
This was a painstaking job, well done! In my hands it would break into pieces the moment I started disassembling it. Now you need to up the ante and restore a V5000 or V6000 :-) These are as close to pro camcorders as consumer video could get at that time. The video is also done very well! Subscribed.
Wow thats great work and time and it works great videos
Wow!! I was waiting for this forever, amazing you got it fully working now, this is so rare to see in 2022! most tech’s don’t even wanna touch old camcorders because it takes too much time. Now I will assume the answer for this will be negative but by any chance are you interested to sell that camera or do you have any that you can recap and sell? I’m looking for a good manual zoom manual focus video8 Camcorder/Hi8 camcorder, I am in Canada and out here there are no techs willing to touch old Camcorders. It appears as you have the love to repair these camcorders with a lot of patience. Well done, you sir are a genius!
Thanks for watching all the parts of the restoration VCR Guy, really appreciate it. Regarding your question, outside of making these videos, my day job is a videographer and I wanted to buy a CCD camcorder for experimental-type short films. I might look at doing more restoration videos on other vintage camcorders in the future, which I could look at selling on if the restoration goes to plan but I will have to look into it. Thanks again. 🙂
@@theretropal Thanks & I really enjoyed your video series on refurbishing the unit. Please don’t hesitate to let me know if you decide to refurbish another vintage camera or sell a refurbished camera down the road! :)
This is really impressive!! Ive tried so many times to get different handycams working by recapping them completely and they have never worked properly afterwards. Congratulations!
Nice video!
This 3 part series was AMAZING. Thank you for taking the time. I learned a TON here as well watching your general solder removal techniques used in very tricky areas. I had 2 questions. The first was, do these camcorders have rubber belts used anywhere like traditional analog audio, or are they direct drive type/ geared only? My second question is on the cleaner spray you used. I’m in the USA, are you referring to what we would call DeOxit? or perhaps 70% rubbing alcohol? I didn’t want to guess or google on that one and instead, check directly with the pro since you used a lot of it very effectively i should add.
They are great videos about camcorder restoration, I believe it took a lot of time and nerve, Just wonder is any camcorder of that age would suffer the leaking cap problem, or it could be affected by intensity of previous use and storage condition.
Thanks for the video series.
I assume this guide will work for all these series camcorders, and any differences between PAL and NTSC will be obvious to the eye? I have several of these and love them, and have been looking high and low to find a walkthrough on what they need, where and why. Thank you for doing this, i hope more of the people watching this will put the work into theirs, these units are worth it.
Congratulations on your perseverance and patience! Huge amount of work to do. I'm not surprised that the services do not want to undertake repairs. There will come a day when your camera will be one of the few working.
Hey man, i bought the same one a while back at a thrift but i cant find the mic cover, whered you get it?
Where did you get that microphone cover from?
Hello! Can you please tell me which caoacitors i should replace? Whenever i turn my camera (sony ccd-f350E) on the viewfinder displays static. Should i just replace the viewfinder capacitors?
Hi, I would recommend you first use the composite port and plug the camcorder into your TV. This will determine whether the issue is the viewfinder or the main boards on the camcorder.
If you do get an image on your TV (set in camera mode), then it's likely the viewfinder caps which need to be replaced, however, majority of all CCD camcorders have capacitors which are now leaking and need replacing and it most likely the same case with your camcorder too.
The capacitors values however, will be different compared to this video, due to the model number.
Hope this helps.
@@theretropal thank you very much for this information and for answering everyones questions! Im gonna order a charger tomorrow and see if its the viewfinder (i really hope so). So wish me luck!
@@theretropal also i just have to say you really deserve wayyyy more than just 410 subscribers (411 now :D) with the quality and effort in your videos! Wish you all the best!
@@fletzyproductions1190 Thank you, appreciate that. Best of luck with the repair. :-)
Hello there, I enjoy your video very much. I have a old camera need TLC. It is CCD-VX1. It has the same issue. Will you happy to take the chanllege? of course I will pay for your hard work. Would you interest to take the work? and how much will you charge?
Sorry but currently, I do not have the time to work on repair projects.
@@theretropal ok thanks