![Daddy’s Money Garage](/img/default-banner.jpg)
- 98
- 573 514
Daddy’s Money Garage
United States
Приєднався 2 сер 2021
Austin, Jon, and Garrett. If you don’t know the definition of “irony,” you won’t understand our channel name.
We’re broke millennials, but we love cars, therefore that’s why we’re broke. I’m sure you’ve been there.
We have been friends for over a decade and we know it shows. Only people who have been friends as long as we have could hate each other so deeply and not show it.
Follow our adventures in the world of cars, racing, deep psychological examinations, lobotomies, tax evasion, bad UA-cam car advice, and hopefully you’ll stay for the humorous entertainment that comes with that.
Subscribe so we can hopefully own houses and pay off our student debts someday.
Really though, if you’re reading this, we hope you enjoy the channel. You guys are why we make fools of ourselves on the internet and we thank you.
We’re broke millennials, but we love cars, therefore that’s why we’re broke. I’m sure you’ve been there.
We have been friends for over a decade and we know it shows. Only people who have been friends as long as we have could hate each other so deeply and not show it.
Follow our adventures in the world of cars, racing, deep psychological examinations, lobotomies, tax evasion, bad UA-cam car advice, and hopefully you’ll stay for the humorous entertainment that comes with that.
Subscribe so we can hopefully own houses and pay off our student debts someday.
Really though, if you’re reading this, we hope you enjoy the channel. You guys are why we make fools of ourselves on the internet and we thank you.
NO REPLACEMENT FOR DISPLACEMENT - Chevy 454 Big Block Build From Start to Finish!
After a LOT of setbacks, we finally have progress to report on my brother's 454 #chevrolet engine!
Follow along as we #build this #engine from the ground up, taking you along for all of our misfortunes.
Special thanks to @TechnicianTroy and @nickthevanman9011 for all their help along the way!
SUBSCRIBE TO SEE IT IN THE CAR SOON.
Follow along as we #build this #engine from the ground up, taking you along for all of our misfortunes.
Special thanks to @TechnicianTroy and @nickthevanman9011 for all their help along the way!
SUBSCRIBE TO SEE IT IN THE CAR SOON.
Переглядів: 1 343
Відео
UNBELIEVABLE Project Car Beginnings - Cheap, Easy, and FAST!
Переглядів 3,2 тис.10 місяців тому
...we should've built a #chevrolet. Check out the screaming deal my little bro got on this #nova! Be sure to like and subscribe to follow the #project! Subscribe to @TechnicianTroy and @nickthevanman9011 as well!
DRAG RACING, GRUDGE MATCHES, AND BREAKING STUFF(Pt. 2) - NO NAME NATIONALS 2023
Переглядів 1,1 тис.10 місяців тому
Welcome to the finale of #nonamenationals 2023! We finish some #race callouts we didn't get to on the first day, as well as a bit of special #racing with @nickthevanman9011, and see who won awards at the event! I dont know what else to put here so just subscribe and follow our next project...soon to be revealed. ALSO GO SUBSCRIBE TO @meanstreetmopar5368 so he can race next year! Hell subscribe ...
DRAG RACING, GRUDGES, AND BURNOUTS(Pt. 1) - NO NAME NATIONALS 2023
Переглядів 2,2 тис.10 місяців тому
Welcome to Sikeston, Missouri! Come along with us on day one of the #nonamenationals! We did some #racing, did some sightseeing, and hung out with some good friends! This is not a #mopar event, but I'm using the tag because Mopar people love this kind of stuff and I have bills to pay. SUBSCRIBE AND WATCH PART TWO. ALSO SUBSCRIBE TO: @TechnicianTroy @travismopargarage4949 @TheTazzman1968 @BadTre...
DECLARING WAR ON THE DRAG STRIP (@TechnicianTroy and @nickthevanman9011)
Переглядів 2,3 тис.10 місяців тому
We're down to days before the #nonamenationals and we're ready to respond to our #race callouts. Representing the #mopar crowd at the event, we intend to deliver. Oh also we fixed a bunch of stuff. That's here too.
Replacing the Windshield in your Classic Car Yourself is Stupid Easy
Переглядів 3,1 тис.11 місяців тому
Over the past year many people have asked if we would replace the #windshield in our classic #mopar race car, the Junkyard Jet. Well, we did, and managed to make a little #howto video out of it too. Hope this qualifies as educational entertainment.
The Cheapest Classic Cadillac on Facebook Marketplace Receives Some Much Deserved Love
Переглядів 1,6 тис.11 місяців тому
People have asked about Jon's #cadillac and we're happy to report that some of the #restoration has begun! We made it a little more drivable and easy to deal with. That way Jon can enjoy the #classic car he's always wanted. LIKE AND SUBSCRIBBLE
The 1962 Snapper Comet 30 is a lawnmower that WANTS to maim you
Переглядів 4,1 тис.11 місяців тому
You guys chose this video. I dont really have much to say. Its a #snapper #lawnmower from the 1960's. Seriously what do you want me to put here? I cant even think of another tag so Im just gonna add #minecraft to it so some people searching for that may click on this and help me gain some ad revenue off this stupid video that shouldn't exist. Next video will be car stuff.
Vans CAN be Race Cars(Feat. @nickthevanman9011)
Переглядів 2,5 тис.11 місяців тому
Our video was hijacked by @nickthevanman9011and he is here to show off his #van #build for #nonamenationals this year! ...theres really not much more to say than that. Just watch the video and subscribe to both of us. That is not a request.
THE VERMONT LOOPHOLE IS CLOSED(...and it didn't have to be)
Переглядів 11 тис.Рік тому
THE VERMONT LOOPHOLE IS CLOSED(...and it didn't have to be)
FIXING OUR BROKEN RACE CAR WITH @TechnicianTroy
Переглядів 2,8 тис.Рік тому
FIXING OUR BROKEN RACE CAR WITH @TechnicianTroy
The New Home of the Junkyard Jet(Feat: @TechnicianTroy and @nickthevanman9011)
Переглядів 3,1 тис.Рік тому
The New Home of the Junkyard Jet(Feat: @TechnicianTroy and @nickthevanman9011)
The Underdog of V8 Engines Built Cheap and Easy(Feat:@nickthevanman9011)
Переглядів 11 тис.Рік тому
The Underdog of V8 Engines Built Cheap and Easy(Feat:@nickthevanman9011)
Motorcycle Dealerships Try To Rob You
Переглядів 3,5 тис.Рік тому
Motorcycle Dealerships Try To Rob You
LEARN TO SOLDER FROM A PRO IN UNDER 10 MINUTES - STRONGEST, MOST RELIABLE, WATERPROOF CONNECTIONS
Переглядів 1,3 тис.Рік тому
LEARN TO SOLDER FROM A PRO IN UNDER 10 MINUTES - STRONGEST, MOST RELIABLE, WATERPROOF CONNECTIONS
STATE OF THE CHANNEL 2023 - THE NO NAME NATIONALS AND NITROUS(Feat. Race Car Cold Start)
Переглядів 2,9 тис.Рік тому
STATE OF THE CHANNEL 2023 - THE NO NAME NATIONALS AND NITROUS(Feat. Race Car Cold Start)
NO NAME NATIONALS 2023 - This Video Was Made In One Take and Took Less Than Ten Minutes
Переглядів 2 тис.Рік тому
NO NAME NATIONALS 2023 - This Video Was Made In One Take and Took Less Than Ten Minutes
BUILD BREAKDOWN - FROM DERELICT TO DRAG CAR - THE JUNKYARD JET
Переглядів 9 тис.Рік тому
BUILD BREAKDOWN - FROM DERELICT TO DRAG CAR - THE JUNKYARD JET
THEY DON'T BUILD THEM LIKE THEY USED TO (yeah they do lol)
Переглядів 2,5 тис.Рік тому
THEY DON'T BUILD THEM LIKE THEY USED TO (yeah they do lol)
BARN FIND PONTIAC - TOTALLED MERCURY - CLASSIC CADILLAC - WELCOME TO CONTENTQUEST - MINECRAFT
Переглядів 2,2 тис.Рік тому
BARN FIND PONTIAC - TOTALLED MERCURY - CLASSIC CADILLAC - WELCOME TO CONTENTQUEST - MINECRAFT
SMOKE AND CHAOS - NO NAME NATIONALS 2022 - TWO DAYS OF BURNOUTS AND DRAG RACING - MINECRAFT
Переглядів 8 тис.Рік тому
SMOKE AND CHAOS - NO NAME NATIONALS 2022 - TWO DAYS OF BURNOUTS AND DRAG RACING - MINECRAFT
RACE TRACK READY - FIFTEEN MINUTES OF RED LINE - MOPAR MAGNUM MINECRAFT
Переглядів 6 тис.Рік тому
RACE TRACK READY - FIFTEEN MINUTES OF RED LINE - MOPAR MAGNUM MINECRAFT
CLASSIC CAR ROAD TRIP PREPARATION - WILL THIS 1965 PLYMOUTH MAKE A 600 MILE ROUND TRIP?
Переглядів 4,4 тис.Рік тому
CLASSIC CAR ROAD TRIP PREPARATION - WILL THIS 1965 PLYMOUTH MAKE A 600 MILE ROUND TRIP?
WILL IT BREAK - MOPAR RACE CAR HITS TRACK FOR THE FIRST TIME - 360 MAGNUM - MINECRAFT
Переглядів 10 тис.Рік тому
WILL IT BREAK - MOPAR RACE CAR HITS TRACK FOR THE FIRST TIME - 360 MAGNUM - MINECRAFT
One Of My Classic Mopars Almost Caught Fire(Also Mother Nature Hates Drag Racing)
Переглядів 7 тис.Рік тому
One Of My Classic Mopars Almost Caught Fire(Also Mother Nature Hates Drag Racing)
The Quest For Burnouts(Also Our Race Callouts For No Name Nationals 2022)
Переглядів 9 тис.Рік тому
The Quest For Burnouts(Also Our Race Callouts For No Name Nationals 2022)
This Race Car Tried To Destroy Itself(But We Fixed It)
Переглядів 9 тис.Рік тому
This Race Car Tried To Destroy Itself(But We Fixed It)
This mower was on rescue 911 and it cut some kids leg in half in the middle of missouri
You can get pistons from Australia hemi performance I think they are called they go 60 tho
Except for us, lanemen, you didn't show us how to actually set the point.
My cat used to fight the cat in the mirror. This better, dancing!
Hey, 1999 Mercury Grand Marquis GS here. You are the man! I don't know how you find out all this information, but thanks so much for it all! Much appreciated.
Any way to increase the brightness of the digital dash? Mine is the same as your's. Seems really dim in daylight.
Any more news on the engine?
Motor in car yet?
It's in the car, most systems are completed, and a video is coming soon!
This is maga. This thing was built in America and built like a tank. By americans. Hard to kill and a backyard mechanic can work on it. We need to bring back Manufacturing in america.
2010 Lincoln Town Car. I guess my factory code is behind the driver's side panel. And I guess I gotta take the panel off to retrieve the code. Anyone know for certain?
can you try this on a non rear pump car
It wont work if your transmission doesnt have a rear pump.
I clicked on this video because I seen a Snapper. We had one growing up. Those things never die.
So theoretically if it uses mechanical pumps I think you can bump start it regardless if it’s manually or not
i have been doing this VERMONT THING SINCE 1959..AND HAVE TOLD ONLY THISE WHO PAID ME... BUT VERMONT SHOULD HAVE ANY STOLEN VEHICLES ON THE INTERSTATE HOT LIST AND DIDNT HAVE TO REGESTER THOSE GUILTY OF HAVING STOLEN VEHICLES IN POSSESSION.... NY WILL REGISTER PRE 1973 VEHICLES WITH A BILL OF SALE AND A MV 51 FORM BUT YOU NEED TO BE A RESIDENT OF N.Y. AND HAVE THE INSURANCE. ..VERMONT DID NOT HAVE INSURANCE REQIREMENT AT TIME OF REGISTRATION.....................................SO MOVE TO VERMONT OF N.Y.
I bought one of those used and kept it for almost thirty years until it finally fell apart. I figured I would buy another one, so I went online and ordered one. What a colossal piece of crap. I had that thing repaired 4 times in eight years, the worst part being it started acting up as soon as it was out of warranty. It cuts well and the 13.5 hp motor runs strong but the drive system isn't worth two cents. Right now, it will only go in reverse, and I refuse to have it repaired again. Apparently, it was so bad it was discontinued. I put up an ad and the photos I took look great, it appears brand new, but I listed it as "for parts only" because I don't want to screw over someone. I just bought a John Deere lawn tractor and I'm pretty sure I'll have better luck than that snapper.
Cool that’s exactly what I paid to!!🙌🏼🤙🏻
A complete engine in one video! Nice 🙂
Dude I've been driving those cars I had about every color Style Grand Marquis Crown Victoria p71 p70 B Lincoln Town Car long oh and the Crown Victoria Sport as a young guy now I'm older they weren't cool to other young people when I was driving them now all the young people want them they're great cars but they have their issues but they're worth it have a good day my good friend
I have a 64 valiant with the A904, just the other night it did NOT wanna start on my way to work and since i park it nose toward the street in the driveway i bumpstarted it in 2 car lengths and headed out to work lmao. A friend on discord joked "try bump starting it," i didn't believe them but I was late and worst case scenario I could push it and streetpark it. Lo and behold, it started right up and i headed out!
Great mowers, and there are still thousands of them out there being used every day.
Any chance that kit # was 37-119?
That's good news and I am hearing a very happy and done well engine. Going to be a very stout runner by the sounds of it. How are you all doing? Hopefully everything is going well I need to get caught up.
What people don't realize about the poly engines, is that while they are not great for high rpm horsepower or racing, when it comes to performance and torque under 5000 rpm, say for a reliable, fuel efficient mil that provides great throttle response for every day driving, it is hard to beat, and worth the money.
Tried the blenderdoor trick on my 04. Didn't do a thing. Just turned to floor vent on. Are all years the same?
Blend door just controls hot and cold. Shouldn't have anything to do with the other vents. Did you disconnect the actuator after manually moving it?
Its a snap with a snapper
Okay, I'm subscribin because Uncle Tony said to but yall look like the Trailer Park Boys if they actually knowed how to do stuff.
You have no idea how many times people have called me Ricky, lol.
Put a magnet on the end of the screw driver so you can keep the screw on the end for easier insertion.
HAHAHA alright! You are the man! Was skeptical that the automatic door lock thing would work on my CVPI - lo and behold it did! Too Cool! Thanks, brother!
like your style and I actually made it through what can be considered a very long YT video to see how you set the dwell. Unfortunately, in the end you didn't actually show how you set the dwell angle. You just showed the meter display incorrectly before.. cut.. and then after.. "fixed!" What did you do the do the points when you were off screen? I have never set the dwell (why I am watching this video) so I have no clue what you changed on the points that made it lower the angle.. also, where did you put the piece of card stock? Again, I dig your video style but it's a swing a miss for this video with me.
You put the card stock between the points, and this distributor's dwell angle is adjusted by an offset screw. Most are adjusted by a hold down and just sliding the point base around until the reading is correct. The way this one is adjusted is not typical for most distributors.
Keep on making um
Love it!! First starts are fun and nerve racking all at the same time, good job guys!
Now you just need the rest of the airboat
Why does it look like a mouse instead of a rat???
IT'S ALIVE.
I could be wrong but this doesn't look like a big block
Definitely is.
Look at that belt!
Its about 3/4" too long, but it worked for break in lol
Looks like a SBC to me.
Definitely not.
Man put a monster cam in that beast and a set of headers and watch it come to life.
It does have a cam, literally zero tuning has been done and the engine is idling high. It'll sound much better once its in the car and everything is set right.