Відео

Are you able to drive the crank with a drill?

I'm in southwest Michigan! 1974 plymouth scamp!

not sure why you wouldn't dress those welds it would have looked so much better...

A little misleading. Your cut list and drawing doesn’t match how many you actually used. Should actually be 40pcs and 32pcs. Guess I gotta cut some more

Have you ever had wheel hop or shaking on the front end? We have this problem of the front end shaking around 61mph. Seems to be temp dependent so I’m guessing tire grip and toe setting but not sure. 🤔

could be wrong but shouldn't this be "how to paint" this only covers the surface dye soaks in.

I put a rear sway bar in my A-bodies, but I only use Firm-Feel because they hang like the factory did them. Up & out of the way. Not only does it replicate the way Chrysler chassis engineers determined it to work best, it doesn't hang below the axle and "Tell" anything. Stealth is nice

Back in the early 1980s I used to do double flares on transmission lines all the time and we didn’t have the fancy tools that you had in this video…. Maybe I’ll have to bust them out and see exactly what we used to use. I don’t remember all the problems people seem to have in videos online. My boss, back then, taught me… and he was a very good mechanic

My mother took me to see this movie in the theater. She is responsible for me becoming an expert marksman in the navy. I miss you mom.

Boy o boy you really risked your life using those cinder blocks they are very prone to breaking, so pleased it all worked out ok

its a dope car, but the story is totally fake.

Hey mate m, looks beautiful do the new steering rods have castle nuts and split pins with this kit? Cheers Jacob

What is a square hex head?

I have an orange Barracuda with old paint lm going to be trying this, Big Thumbs on the vid

Good morning brother, the " J-clips " in the video, any chance you can point in the direction to purchase those

YES. 1970 NHRA rules !!!

In the the third year of Pro stock, Jenkins complained to NHRA because his Camaros were getting creamed by the HEMI cars. The NHRA bosses voted. They weighed the HEMI engined cars down so the Chevy and Ford cars could compete. It was all politics. It was awful. Very unfair to be weighed down because you were better !

It was a FANTASTIC time to be alive ! !

I am in the process of building a trailer as well. Working on ideas for a lid. Hard to find info for ideas. You have done a great job and this will help me in my build! Was very helpful seeing you setup the gas struts as I will be doing that as well. Are you painting the top when you are done?Thank you, Bill

Ford all day.

I use Lucas, but then I wanna try some different so I switched to Amsoil 100% synthetic gear oil ran it for one year now and so far so good✌️

Abd...

I was having problem with flare splitting during process, was told the cutting tool work hardens tubing. Best to cut and prepare ends with fine cut-off wheel. And then prepare end with fine burr and hand files to prepare edges. Don't forget to oil work to prevent damage too.

Turned out great!

Your truck is really dirty… 🤔😂

very nice! My fenders are beat up so when I put my JK wheels on my M416, I just flipped the fenders around so the lip wouldn't catch. This looks much nicer!

Yeah man ..shit like seats and even the steering wheel make a significant difference in the driving experience of a performance car 😮

Sexy ride 😅 and im a hardcore GM guy

390 ford is a crapper

Great video, thanks for posting. Can you point me to a data tag decoder for 1975 Chrysler Newport? Thanks!

I thought it was a grill homeboy 😅😂 i apologize for my urge for carne asada,, sometimes it overwhelms me 🥩🍗🍔♨️🤦🏽‍♂️🤷🏽‍♂️🤷🏽‍♂️😂😂, but still a beast piece of piece of work and history!! 💯👌🏽❤️🙏🏽🙏🏽🙏🏽

Nice rear brake setup on the Cuda.

If my kid was to crib up anything he was working on like you just cribbed up your trailer he'd never worked on anything again anything else again

78-81 pro stocks….man wtf happened w bill!

Gasser

I like Valvoline Conventional 80w90 no lsd additives.

Very nice build. I have an identical trailer and we have similar ideas. Have you decided what kind of lid your going to put on?

The Dodge would have left the mustang

Nice master cylinder and adjustable bias valve. If when you get done the brakes feel wooden, even after their warmed up, you may want to try a more aggressive pad set for the front. For the Fox Mustang (1989) I had to go to a larger bore master cylinder (1") from the 1993 Cobra along with the adjustable bias for the rear SVO discs; stock setup was drums. I still have the vacuum booster, as my idle vacuum is still sufficient enough. Look forward to the finish on the brake upgrade.

Underrated af, love the ride❤️🤍💙

Hi, thank you for meticulously stepping through the process. Do you recall where you got the red tube bender?

Nice 14" 6 pot Baer brake kit for the 1970 Cuda. I got their 13" 4 pot kit for my 1989 Fox Mustang 5.0 Sport, as I don't have to go to a 5 lug setups out there that are a PITA with compromises. The kit comes with a new spindle, hub, slotted/drilled discs (assembled) and I can still use the 17" wheels I currently have.

Where did you wind up getting the axle?

Are you planning to offroad? If so that suspension is gonna move more than an inch especially when flexing and twisting on the trail its gonna rub the tub. I have an M416 also. Nice build good luck

What were the part numbers of the lock n roll? Nice work!

Awesome work man. Really enjoying the 416 build vids. I just picked one up and getting ideas.

Great info thanks for putting that together

Thank you for this great video, I'm going to follow your lead and copy your design, I love it!!

Looking for one these. Glad i found your build series :)

Great video on the Cuda build. I wish you would have shown more detail on some of the less important moments, ex. remote mirror mounting, over head seat belts, ect. I'll have to figure some of these out on my own which was challenging but worked out. Still have few other hiccups but guess it will work out eventually. Thanks again.