Will it Explode?! Cheap Turbocharged V8 | Tony Angelo's Stay Tuned
Вставка
- Опубліковано 6 лис 2022
- Everyone building a car has a budget, and the creative thinkers go a bit faster for every dollar spent--even if that happens to be putting a $128 Turbo, in a $1000 car.
Watch Tony Angelo and the Stay Tuned crew scoop up a 1998 Lincoln Mark VIII and add cheap turbo power. The Mark VIII has killer potential lurking in its 32V V8, and is often overlooked by Hot Rodders and tuners alike. We take the cheapest turbo money can buy, throw it on a very cheap V8 Lincoln, and let it eat! Will it explode? Will it work? Watch and see---let’s go fast for cheap!
----------------------------------------------------------------
Grab the New Stay Tuned Shirts and Gear at: tangeloracing.myshopify.com/
We appreciate YA!
Send Me Stuff: PO Box 68 Spring City PA 19475
Instagram ► / tangelo96
Edited by ► / thakingofhearts
Tunes by The Subtastics subtastics.bandcamp.com/
----------------------------------------------------------------
My Partners:
Eastwood Tools►www.eastwood.com/ Dorman Products: www.dormanproducts.com/
Grease Monkey Gloves Available at Autozone, Home Depot and more!
Miller Welders► Click the link to Grab Our Synchrowave 210! www.millerwelds.com/equipment...
----------------------------------------------------------------
Subscribe to our UA-cam channel for new videos every day! bit.ly/HagertyUA-cam
Visit our website for daily automotive news, cars stories, reviews, and opinion: www.hagerty.com/media
Stay up to date by signing up for our email newsletters here: www.hagerty.com/media/newslet...
Follow us on social media:
Facebook | / hagerty
Instagram | / hagerty
Twitter | / hagerty
If you love cars, you belong with us. Hagerty Drivers Club is the world’s largest community for automotive enthusiasts. Members enjoy valuable automotive discounts, exclusive events and experiences, roadside service created specifically for collector vehicles, and a subscription to the bimonthly Hagerty Drivers Club magazine. Join Hagerty Drivers Club here: www.hagerty.com/drivers-club
Like what you see? Watch our other series including:
Redline Rebuilds | Time-lapse engine rebuilds from start to finish bit.ly/RedlineRebuild
Barn Find Hunter | Tom Cotter searches the country for abandoned cars bit.ly/BarnFIndHunter
Jason Cammisa on the Icons | The definitive car review
bit.ly/JasonCammisaICONS
Revelations | Untold Stories About Automotive Legends with Jason Cammisa
bit.ly/JasonCammisaRevelations
Contact us:
Suggestions and feedback - videoquestions@hagerty.com
Press inquiries - press@hagerty.com
Partnership requests - partnerships@hagerty.com - Авто та транспорт
I really appreciate that this is just a single build video and not a thousand part series. What a monster!
Yeah, we wanted to get it up and running and to the dyno inside of a few days, and it turned out killer!
I agree. I’ve been hooked on these kind of shows since I was a kid and that always frustrated me. I realized it with project copperhead that Stacy David did back in the day.
@@StayTunedTA this content is amazing i feel like i should have to pay to watch this quality of video
Totally agree 😎🤙🏾
@@StayTunedTA you and you’re team are killing it, Tony!!!
This may be the first 'budget' build that actually could reasonably be called a budget build. Well done!
@Hagerty random facts about Lincolns the hood and the trunk are usually aluminum It's been like that since forever even on the navigators even on the market even on the town cars. If you've ever seen a Lincoln with a paint is peeling off the hood it's because sometimes they had trouble adhering paint to aluminum.... The hood's not fiberglass it's aluminum. This is how Ford got experience with making aluminum bodies before they went to a fully aluminum F-150... Ford had secretly been putting aluminum panels on their vehicles for a long time.
@@patrickgronemeyer3375 yep, i agree..
Conveniently they're ignoring fab and tuning costs... Not everyone has ready access to a workshop and dyno xD
@@krazed0451 Yep.. Labor isn't cheap from ppl who know what they're doing, sadly.. A tune is at least $650..
It's budget for today, until the yards are scoured clean of these cars :P
Using Autozone adapters and welding stainless to galvanized tubing: this brings back memories of being a broke tuner in my 20s. I have to admit, it's a bit strange seeing it occur in an actual shop.
Then never mind how they virtually shorted the two exhausts one against another and sent to the turbo something like a waste gate derivation, hahah
Can you answer in more detail?
well he did say dirt cheap build
1100 car they can’t spend more on just pipe lol
I'm just watching this for the first time and saw how they routed the exhaust, and then wondered where the wastegate was. Lol. But with their up pipe, I can't see it building much boost in that configuration. I'm only 21 mins in though so I'll see.when it ends I suppose. Lol 21:48
Reminds me of my dad's shop growing up. He's gone now. But still so wholesome to me down to the food deliveres and everything. Man I miss that old man🥲
I can still remember that sweet smell of a freshly rebuilt engine firing up for the first time and the smell of the new paint, and Indian Head on new gaskets all heating up together,the good old days are long gone but i want to say thank you dad for everything!
props to haggerty to bringing on tony and stay tuned. this is real oldschool tuning, not trying to sell me bullshit, or script in fake drama.
simple, to the fucking point, and entertaining as hell. A+
Couldn’t agree more bro, channels make me leave and never return when they try to make a comedy show and or beg for interaction. Example: comment what you are snacking on while you watch this vid. Like really?
Tony and Lucky a great team. But anyone he teams up with are good people.
🤣
The drama comes later when people try to copy what they did in this video and die as a result.
@@MrJHDK you must be new to cars. People have been doing this for a decade or more already.
Such a down to earth, relatable video for the budget speed enthusiasts. That Lincoln is elegant muscle.
Thanks! I have come to love this thing already. First full dyno pull did it.
Gentlemens luxury sports car
Budget just means expensive long term.
Drove a couple Lincolns back when they were new and thought it was scary that old people drove these cars around
"Hot Rod Lincoln" just started playing on the jukebox of my brain...
My pappy said, "Son, you're gonna' drive me to drinkin'
If you don't stop drivin' that Hot Rod Lincoln."
RIP, Commander Cody!
@@rb032682 ...and His Lost Planet Airmen, Amen 🙏
i can hear the guitar riff in my head deedle deedle deedle deedle neer neer neer neer
Mhmm 4.11 gears
Hell yeah, great song!
That Mark VIII body shape was certainly top of the game in it's time!!!! And it still is today!!! It looks immaculate, when it's taken care of like a gem!
i was in my gen3 s550 and i saw this pewter mk8 at the light. He revved i thought he just had headers and exhuast and maybe nitrous. Nope he pulled the front end up when the light went green and put a bus on me. I pulled over to ask him what was done. this madman gen 2 coyote swapped and twin turboed it with buttom mounted turbos. the other experience i have with MK8s are my friend chad back in highschool hollowed his out and had a 300 shot of nitrous. Almost got shot when a dude in philly lost to him.
Yes great body and frame... you can build out the suspension and for not a lot of money get it handling too. These are cool to build on and until this video...super cheap lol now everyone's gonna buy em up
I remember rolling in my buddy's 1991 300zx Ttop just goofing around and this mk8 with an exhaust absolutely destroyed us lol.
Little do people know they got the 4v
My neighbor has one EVERY time I pass it I barf a bit, then I remember that thing was probably SICK for its time
Looks are certainly personal. Some of us like a real clean one.@@Omgkhii
My pappy said son you're going to drive me to drinking if you don't stop driving that Hot Rod Lincoln.
I'd love to get a 67 Lincoln with the suicide doors
Throw a twin turbo LS 470 with an 8-speed trans and a 355 rear end
Have one hell of a daily driver
@Justin Bozeman I'd rather do a heads and cam 7.3 Godzilla with drop in forged rods and pistons, a 3.0 Whipple making 18-21psi on E85 with long tube headers, high flow cats and some really long straight through mufflers to help keep it quiet while flowing plenty. Use a 10 speed transmission with a 2600-2800 stall converter and 3.42 gears in a narrowed 9" in a hard top sedan bagged on 22" Isotope Kennedy wheels. Painted House of Kolors Root Beer brown or Brandywine with a light cream and tan two tone interior and restored factory bright work inside and out.
@@chesspiece81
That sounds sweet but not cheap.
@B.S. Adventures We were talking about building a 60s Lincoln Continental. They're not cheap to build. Even if the 460 was pulled and built into a 514ci stroker with heads, cam, intake setup, and a C4 or C6 transmission with a Gear Vendors OD would still cost a ton. So, instead of a bored and stroked BBF with a nice top end, that would probably make 650hp with an old 3 speed transmission and OD unit splitting the gears a forged EFI 7.3 with ported heads, cam, and Whipple would easily make 900hp with better fuel economy and rock solid than reliability with a 10 speed automatic. Palm Beach Dyno made 700+ whp with their head and cam 3.0 Whipple 7.3 in their F250 shop truck and uploaded on UA-cam last week. The Gen V Whipple is pretty quiet, and with the super wide powerband that 7.3 and 3.0 would make, it would be perfect in a heavy luxury car like a 67 or 68 Continental sedan.
@@chesspiece81 cool idea.
$10.42 per hp is insanely impressive.
I guess my $150 dollar beater Civic that I use for work is pretty impressive then! :D
Neglecting the $6,000 in shop space and tools
@@yamomsballs ..are you tryin' to say not everyone has a shop full of tools, TIG welder, a lift and a dyno? ;D
I thought it was $1.42? Back to the drawing board I guess.
@@finished6267 Really? It made 2,911 horsepower? Guess I missed that part!
that isnt just any Mark VIII, it is an LSC from the looks of it. Totally awesome cars and im on the hunt for one in good condition myself. Lincolns are seriously underrated, especially the Mark cars!!! The cobra 4.6 dohc motors are great engines that take very well to boost.
Don't tell everyone bro let's keep them on the down low
Definitely NOT a 1,000 dollar car, sorry but he's lying., just because is a Lincoln that already makes it be worth 4 or 5k and the perfect conditions is in... nobody will find that car for 1k ever
@@champion20199 you could easily get that car for less than $2000 from someone who knows nothing about cars.
@@shawnkeene2488 , Oh yeah, I'll do that without any problems with my conscience... Lmao 😂
not an LSC; there's chrome trim.
I work at a local Ford dealer here, and one of these came in. Most everyone thought I was crazy when I said I wanted to build a mark 8. But as you guys are proving, it can be done on the cheap. When the motor lets go, you can do a 5.0 stroker kit, or swap a coyote.
Hagerty already nailed it with Jason Cammisa, but they topped that with Tony Angelo. This is such a joy to watch, super thanks!
agreed
Jep +1
I really like this modern actual hotrodding, it's just within grasping distance that I'll watch anything like this just to learn a little
I dunno. I see is a lot of welding & a lot of shoe-horning. These guys make it look easy but I really don't think it is.
@@danrogy you just described installing any turbo on an NA car, if you can't weld or don't have access to someone who can you're SOL to turbo a car
@@danrogy welders can be had pretty cheap these days with overseas brands. You could get a $100 harbor freight flux core mig welder and make it work. Prob won't be pretty but with a little practice your welding.
@MikeyD
Flux core wire welding (FCAW) and MIG (GMAW) are two different welding processes. HF's crappy little flux core machines are $150 now and only have a high/low switch for heat control. They absolutely suck for welding thin materials such as exhaust tubing, regardless of experience. A proper flux core welder with heat control is much better, but is still a poor choice for the application.
If you are on a budget, a used Lincoln, Hobart, or Miller MIG would be a much better choice. I found my Lincoln 140a MIG, which is still a hobby-grade welder but is in another league above the crappy HF flux cores, for $75 like new in box.
Some of HF's higher end welders are actually quite good though, and are relatively cheap considering their capabilities. I have a HF Vulcan ProTIG 205 that is well worth its $1300 price tag and will compete with welders 2-3x its price with ease.
I remember Tony's first episode of Hot Rod Garage. He has come a long way with his presentations. Awesome job as always.
Rev it up! [90's Ford clunk symphony] "That's good. Shut it down"
I have said it a million times, the 4.6 in any form is a absolute workhorse. These engines will still be around another decade
Sadly, with shops out here charging upwards of 12 grand just to fix piston rings and valve seals on these old 4.6's, they will die long before their time is up. It's a shame that these shops out here are all run by profiteering crooks who would rather junk these great old cars than do what is realistically like 2 grand worth of work to keep them on the road another 10-20 years.
My 2008 Mustang has of course the 4.6, I installed a Saleen supercharger at about 30k miles it now has 105k and (I'll say it quiet not to jinx myself) still runs like a top. I blew up the tranny but that 4.6 3 valve keeps on tickin.
Transmission isnt tho lol just like ram trucks cummins amazing motor tranny garbage
4.6 without some form of vvt is best for longevity imo
@@MichaelMulin 335k on my stock 2000 24valve trans I have the best luck with the worst thing like 6.0 powerstrokes had several with no issues and the Cummins I have now has 335k stock trans no issues doesn’t slip doesn’t struggle to find gears. I also have the agree 4.6l fords take a beating my 06 gt had a blower on it and was awesome my 02 was fun my 2000 was as well and then my others were Fox bodys but this video is making me wanna build something
With all that new found power y'all need some '99+ sn95 PBR calipers up front now, they fit the stock rotors and give you almost twice the pad width. I did this on my 93 thunderbird with ebc brake pads even with drums in the back still it stops on a dime. Edit: in case anyone didn't know the mark 8's Fn10 platform was based on the Mn12 thunderbird/cougar platform/chassis.
The PBRs will work but they would have to switch to the tbird rotors. The mark viiis and the sport model tbirds have a 11.5in rotor vs the 10.8in standard tbird rotors. The rotors are too big to fit inside the caliper bracket. But still a good upgrade.
@@jasonmccoy6052 good info I have an 93 LX with the 5.0 HO, and wouldn't have known this👍
You can easily swap the hube to Mustang and get the Mustang bolt pattern and open up a ton more options.
@@DB-mq4so true I've seen sn95 cobra R brembos on thunderbirds and cougars before. If I wasn't a broke MFer I probably would do this swap but when you consider with a hub swap comes new wheels, tires, and the cost of whatever brake parts you're doing this for it gets pricey real quick. The PBRs just barely fit under my factory 15's so it was the cheaper route for me plus factory wheels keep with my sleeper-looking-bone-stock exterior. If money 💵 isn't a problem for you by all means hub swap.
1st car was a 1993 Thunderbird in white with the burgundy interior. I loved that car. I've always wanted one of these mark 8's. I'd buy either/both of those cars if I could find any that aren't full of rust, road commissions in MI love using salt, sand works just as well if not better on slick roads. Anyways, both are great cars.
That 98' Lincoln Mark VIII was awesome! Made 400whp is mighty impressive!! So glad you did this all in 1 episode and hope that car stays with you guys! 1st x watcher, earned a sub and all noti.👍
i thought my 740IL was awesome. and it made less horsepower by a fair amount !
@@dannyipwn1203 I need to watch that one.
I had a 95 mk8 as my daily in high school and my first year of college. I absolutely loved that car. Ran great, super comfy, handled great, etc. I wish I still had it
When I was younger I always considered Hagerty to be an old man's thing. Congrats on the current success and getting more and younger talent. Whoever thought this up needs a raise
Welcome to old man country
Old man's thing? Hagerty sells insurance. Lol.
These guys aren't young lol
@@MrDwightsimonthey ain't grey
TONY ANGELO!!!!!!
Hey man, I just wanted to let you know, there is a LARGE community of Mark VIII and MN12 chassis people that really appreciate what you just demonstrated. A lot of us have a big struggle trying to make these things perform with the given space, and a power adder.
You definitely got something here.
He legitimately could sell that tubing set up for good money
I love the mn12 chassis, I've had 4 different cougars in my life.
Just don't copy their honky hot side man, that's the worst designed hot side I've ever laid eyes on. Left a lot of power on the table. They should have made one bank do a 180 deg turn and merge both pipes so THEY FLOW THE SAME DIRECTION and then shoot it to the turbine housing. This was a "what NOT to do"... 🤦😂 Or maybe, more accurately would be; How NOT TO DO IT... 😆
@@edwardcollier5949 Not that hot side. Anyone who's mechanically minded will see that one bank is really restricted. The exhaust effectively gas to change direction inside the pipe and go back the other direction and up the up pipe... That's a big No, No for making power...
Mark 8 man here own three one basically Fbo and two stock ones
Really enjoy the technical aspect you bring to your videos.
12:43 "rev it up" car almost stalls.. "yep thats perfect" that shi got me crackin up🤣🤣🤣🤣
I had a '97 and still miss it. That is a fantastic engine and sounds amazing. I have seen several supercharged, but never turbo'd.
Yes! Love the cheap 90s modular fords. With so many ls swaps this thing is a relief.
I'm an IT engineer and live cars, used to race a bit and I always knew in theory what the turbo does and how it works, role, types, even components making it what it is, but it's the first time I truly understand even visually as he explained @18:55 👏🏻👏🏻👏🏻🙏🏻
Accidentally stumbled upon this channel. This is how projects should be done. One episode start to finish. The tune and track times should be interesting.
Hope this is a long term project - that block and those heads are capable of a LOT!
I'm a Mod motor fan so I'm all about this, these MkVIII 4.6ls are a killer junkyard deal, especially for someone who wants to throw a cheap forged rotating assembly in and let it eat.
Love it so far, especially the choice to go cheap single turbo. A lot of the content is based on doing ultra budget builds of course, and being able to fabricate is the key that really opens that door - so maybe a video series about getting into a MIG welder and the other basics of fabrication on a budget? The moment someone can put together a simple & easy turbo setup like this, you're entering another realm of gearheadery lol.
Ry Trappo the rods weren't very good, ( the '03-'04 terminator 4.6 had awesome H beam rods by Manley from the factory) the crank and block were killer. Add the 5.4 navigator heads and that's quite a combo.
@@keithqueen352 You're absolutely right, anything other than the '03-04 Cobra motors and you're going to need to switch to a forged rotating assembly.
@@keithqueen352 they don't have forged rods but forged rods and pistons cost like 1200 bucks or something and you can choose whatever compression you want. I'd do higher compression w boost if you are gonna be running e85. The terminator motor is better but it costs alot more and the car itself costs alot more. With as cheap as these are adding a forged rotating assembly would still have you in budget build territory and you could easily do 700 wheel on stock heads.
@@midnight347 I know they don't have forged rods (except for the '03-'04 terminator) I was 18 when these things came out, lol.
I've owned several and they're great cars, especially for the money. They have many foibles, but since the newest is now 24 years old, they've held up well. If I recall, it weighs just short of 3800#. Four wheel independent, DOHC V8, good transmission and, to me, good looking. Seeing this helps me to understand a couple of the members of the club. Thumbs up!
Some of the ugliest cars made
I owned 3 of them myself and still love the cars.
@@aventari I would explain subjective value to you, but I don't have time. Good luck
@@aventari cool bro
And at least in NY at 25 years old, the car is emissions exempt. So could have fun without worries if it will pass emissions 😊
Awesome! Glad You’re back in Philly @ Tony!! Watched every episode with you and lucky… but I think it’s awesome you’re back home doing your thing. Always doing cool and different projects.
Tony got replaced by a Chick. And,
she is pretty hot looking.
steve
My man has a rip in a special position at 2:20 and I can't help but notice that
Tony Angelo is my favorite builder, dude is a crazy good driver, and his laid-back style is the best. Also I had a tabby cat named Tangelo growing up so he's extra cool to me
And he benches transmissions.
Great to see Tony in a new show. Zach is the BEST!!
1998 - Mark 8 Luxury Sports Coupe (LSC) was a beautiful automobile. I had a pearl white one that I drove from 2000 to 2010. Unfortunately, spare parts and repairs got expensive and parts hard to obtain.
I got to drive one of these in highschool, I was used to driving a Dodge Dynasty which was basically a New Yorker. This thing was a beast, felt like a race car riding on a pillow.
280 - 290 HP and 10 CD Player in trunk.
I paid $21,000 for my Mark VIII used in the year 2000. Had about 26,000 miles on it. And blood stains on the driver side seat belt (I think the previous owner was murdered in it). Went to dealership to see a used BMW, and this car caught my eye - Love at first sight. The interior dash and driver seat - hugged you like driving a spaceship.
@@patrickmccarron5059 I certainly would have bought it over a BMW as well
@@patrickmccarron5059 lol murdered how
I had a '98 MarkVIII back in the late 2000's. With very little work the thing was a MONSTER, even naturally aspirated. Only problem was all the silly little luxury touches that cost $$$ when they crapped out... Air suspension, proprietary HID headlights, etc.
Always wanted one. Had a 94 Cougar instead. Wish people would keep the good American Iron around instead of buying deathtrap Kia\Hyundai scrap.🇺🇲
@@christinesommerfeld9815 Eh, I'll take my GTI. MQB is such a great mod friendly platform, is newer, and puts down power all the same.
@@poiu477 VW may be the only company in competition with Chrysler to see who can put out the shittiest most unreliable product.
@@nicko9725 GTIs are the best car in the world full stop. The workers sports car for the revolution. The stock block can easily do double stock hp with nothing but bolt ons and a big turbo.
From 90 into late 92 my girlfriend at the time worked for Ford and on a nice weekend she would bring home the VII, or the SHO and the occasional Mustang. The VII was really nice for road-trips.
Once headed down to New Orleans in the middle of the night, I was shadowing a berserker who was driving a Jaguar. We were running 100+ all the way down I-65. I looked over at my girl and she was painting her fingernails 😂
The SHO was a ton of fun also. She normally drove the Cougar, that was her first choice. Girls..
Tony's builds are so fun to watch. Thanks for giving him the funding to execute more bad ideas!!
I love this! 32:04 sounds like a MasterCard commercial. "Having a bunch of friends helping to make your car awesome. Priceless."
Great video. Love the craftsmanship that went into the planning and putting this monster together. Great job guys. Kick ass.
As someone who owned a '97 Mark VIII for many years, let me just say for anyone considering one, swap out that BS air ride suspension system for standard coils. It is a CONSTANT pain in the ass to maintain. Carry on!
Pretty easy swap, too. And you can get lowering springs if you want.
My Dad gave me his mark Viii, he always told me it has monster potential but I've never bothered to take the initiative till now.
that car look wild, if it had a wagon version i would love it to heaven
Good to see Tony again. Always love the way he explains things.
Love this series, been a fan of Tony for years. Awesome to watch a full episode, beginning to end with no interruptions and get the whole build!
Awesome! Building my 69 fastback with mostly junkyard parts, including an 03' aviator 4.6. Love the look of these engines.
Yeah, they are really great for the dollars involved. LOVE a 69 fastback.
Got an 03 mach. They look bigger than they you'd think.
As a side note, depending on the firing order of your V8, most will benefit tremendously from receiving a pair of small to average sized twin-scroll turbochargers, as it can improve exhaust scavenging if you pair open and closed valves together so you aren't losing out on power pulses going into your turbo. And because your turbo has two distinct inlets with specially tuned turbine blade and housing shapes, you typically spin up your turbo faster and keep it spooled more with a twin-scroll turbo on a suitable engine. The problem is space. You need to have space around your engine to install a pair of turbos and all of their required ducting. It can get quite cramped if you aren't an OEM who can integrate the turbos directly into the exhaust manifold. Maybe you can consider this route in the future once this engine blows and you decide to pick up and rebuild a salvage engine for it. Either way, still a cool build and turbo lag for days is very much of the era for this car.
Tf does the firing order have to do with anything? You're literally changing the pressure differential in the motor with a turbo. What wouldn't benefit?
Old man worked for Ford. For prom in 99’ I begged the find a MK VIII. I absolutely loved the rear end light treatment and the front xenon’s which we way ahead of their time.
He came through letting me borrow one of his employees cars. That was a great night….
Lincoln Mark VIIIs are super underrated. Good looking cars and a great chassis and engine.
Are they still panther platform?
Tony no one ever reads these comments. However you were some what corect. back, back in the 70's and early 80's, we found really decent cars for less than 2000 bucks. like i paid 900 for my 69 chevelle, my first car i ever bought my 68 javlin i paid 200 bucks for it, and buying junkers along the way like ford pickups ect for less than 500 bucks i paid 650 for a 69 mustang. any way , any way 1975 a friend of dad's, brother gave me a 426 dodge hemi with a chunk litterly broke out of the side of it. I actually welded the chunk back in with a stick welder in dad's farm shop. getting a wore out crack from the guy who gave me the engine, the shop teacher and I at the high school i went to polished the crank for me and made me special shaved over sized bearings for it. and in time 3 years working and buying parts it finally laid down into my chevelle.
The Mark VIII is an awesome car! My grandfather got one new off the lot back in the day. I had a Continental and it was a little less sporty but it still had that huge v8 in it.
In what world is 4.6 l huge, not even a little 302
Such a fun video! You guys all have a great energy! Better then any "car show" on tv! I'm subscribing from this video alone!
no idea how the air is turning the corner from the turbo side bank but exhaust + turbo - fluid dynamics still = fun. keep up the great work.
I'm sure it's a serious flow restriction, but even with a lousy exhaust the turbo adds loads of power.
Might not be optimal especially on lower rpm's, but as pressure builds up, it doesn't matter as much. Surely that setup leaves maybe 10 to 15hp on the table across the range, but in all its simplicity, I think that piping is just perfect in this case.
Yes!!! This was my favorite kind of content with Tony on Hotrod Garage, and it’s great to see him back at it on UA-cam with Hagerty!
I haven't worked on cars for many years but I'm a mechanic at heart and appreciate this video.
Great video, and Zack, what a great run with the Camaro! You have every right to be proud of your work!
This was a lot of fun. I fabricated for AMS from 04-07 so I appreciate the work put in to make this happen. Nice job guys.
I’m so glad to see all of the best old MT hosts coming on to Hagerty and doing videos better than ever!
Not being a smartass, but who else is on Hagerty?
Mt shot themselves in the foot with mtod.
@@Ski_3_p_o They did? Not from where I sit. Plenty of content for the cheap price.
@@stewartspencer3714 jason cammisa
Thanks for doing this build , I had a couple of these cars and I can say , it beat damn near everything I put it up against, so I know you guys is gone be very happy with this build , watch what I tell you
I had a '98 like this, for years - right down to the triple-pearl metallic paint. Unless you're just planning to beat this at the track, until it blows, you might want to keep an eye on the plugs. Those early heads only have 4 threads per sparkplug. Enough boost and you'll loosen them enough to fry the coilpack or launch the plug into orbit.
This is the type of build and cost that I miss from pre pandemic. Thank you for doing this, more please!
I've been using basically the same Chinese GT35r turbo on my Audi S4 for the last 6 years that they had on the car initially. All i did was drill out the oil restrictor (They occasionally give you a fitting with an oil restrictor that would used on a ball bearing turbo). It's been making 600whp on E85 for the last year, and was making 450 wheel for 2-3 years prior to that. i've ran as high as 34lbs of boost with it and 28lbs normally. They're solid turbos if you run good oil, drain it properly and drill out the fitting.
Send me a link to it where building a older Audi now
I remember back in the mid-80s when those Mark VIII's came out, I bought one and the smell of the exhaust was so weird, and when you stood back by the exhaust pipe and revved it, it sounded like it was having to force the exhaust out through a small hole. That may sound weird to some people, but back then vehicle exhaust didn't smell or sound like that. I believe that smell started in the early 80s with the 5.0s that came in the Lincolns. and I know it smelled weird due to all the smog stuff that was on the engines, but it's just something I'll always remember.
I used to want a lincoln mark viii when i was younger but never got one. This video brought back the nostalgia for me! awesome work
Fact: The car-community and Internet in general is better when Tony Angelo is modifying (literally) anything.
Thanks! I appreciate that.
Glad to see you rocking it out Tony I've been watching you since your debut on HRG
Thanks for watching! Really stoked on this one.
Awesome project! I had a 95 Mark VIII & with only a K&N filter, it ran 15.0@98! Can't wait to see what this runs!
So sick guys! Can't wait to see it hit the track!!
My stepmom had one of these back in the day. I loved this car. The interior wrapped around you nicely. The engine sounded amazing. Great fun
Actually Tony the 4.6L DOHC 32V V8 was already in the Lincoln Mark 8 since 1993 (which is wayyy before the Mustang Cobra got the 4.6L DOHC 32V V8).
Ppl tend to forget.. The 2v was in 1991 too..
@@P71ScrewHead Right
@@P71ScrewHead yup, and have fun doing plug wires on those pre-COP 4.6s..lol. miles of wires...
@@Ashcrash82 I like that old skool setup actually..lol My 95 Lincoln is like that..
I guess I've been under a rock.... First time watching Stay Tuned. Entertaining, Informative, and awesome content. *Subscribed*
Super cool build and so realistic.
That would be a blast to drive.
I love that someone is showing a mark viii build. I just picked up a set of ported heads for my 98 mark viii plan on going big bore stroker 5.3 making around 400-420rwhp with custom cams and high compression. I would love to see that a full dyno graph of that 394 pass
I'm going lil bore 0.020 MMR 5.0 stroker 2v TrickFlow Race heads n stage 3 TFS MHS cams, low compression, stay tuned, let's see who makes more power man, 09 P71.. Don't go too high unless on e85, good luck..
@@P71ScrewHead I've seen a 2v with 38cc tfs heads on pump gas with a Edelbrock intake and a stroker with custom cams and 12:1 compression make 499.8 rwhp through a manual trans . I will be an auto car with a built 4r70w. If you go high compression you just need the right cams for dynamic compression.
@@jakewiththemark8 Right, I'm guessing I'll be around 350-380rwhp hopefully.. But, let's see what it does actually..
These mark VIII's were a blast. They roll pretty well in stock form. Great highway car. I've had 3 of them with a few mods. Enjoy!
Can't wait to see the next episode! Love this build so much!!
So very happy for you getting 1M views here Tony! Keep it up bro! Looking forward to seeing that blower installed on the bird that is fire!
I've robbed a few of those engines for Mustangs. Few things to note. The wheels are a funky pattern, so good luck finding any replacements. The Teksid block is god tier, but the rods go at 450RWP. Only the LSC models got a limited slip differential, so you might have to do a lincoln locker if you don't want the one tire fire. Something has been done to the transmission, because that is not a stock 4R70W pan, might have the Jmod done.
yep to all of that.
Lincoln Locker for the win
MkVIII's have a different wheel lug pattern and fit, so those wheels won't go on a Mustang, anyway. IIRC they fit the FWD Continentals and 4 door Jaguars of the era. I replaced mine with 18" aftermarket wheels, since the OEM offerings 16" aren't getting the high performance tires I wanted, built for them much anymore. Those OEM wheels are still valued by MkVIII owners, though, so if you have three good ones and one lousy one, you might sell them on the MkVIII forums and buy yourself a new set of wheels instead. I got Konig 'dial in' model wheels that fit.
You can convert the hubs to the more common mustang pattern. I believe people use the cobra hubs of that Era. Problem solved.
@@westellmodel Fronts are easy, any 99-04 Mustang GT hub. Rears are trickier. You CAN use the 99-01 Cobra hubs, but they're tough to find and expensive. Usually what people did was swap the fronts and drill the rears.
Tony is such a talented mechanic! love all his videos.
After owning a Mark VIII for about 6 years, the front end was a nightmare. I think I replaced everything up there at least twice. And the alignement could never be fully corrected. But it was definitely a monster. I kinda miss it.
This is my favorite car growing up and always wanted to do this to it! Thank you!!! I owned the limited edition in gold!
The guys bring great energy to the show without being over the top. Good stuff HAGERTY 👏
Keep doing this forever. Hell I don't care if you get the same Mark VIII and try to create a turbo spec series for them, I'll watch every one. This is was Road Kill USED to be.
I miss Tony. Seeing him brings back so many old memories from his days in DA
excellent video and i like the format you are doing when putting these videos together very well done !!
Hi mate, John from Australia here, I have paused the video at 3:28 to say that it's great to see you Americans wearing seatbelts, it really is. I'm 55 and have worn seatbelts my entire life, and they saved said life at least three times. It's pretty sweet how they stop you flying through the windshield or into the dash when you hit something, and keep you in the seat and in the car when being ejected from said car would result in serious injury or death, usually death. But top work fellas, now back to the video.
Edit: Paused again at 5:10 - Hey Zac, if there's one thing the world needs more of mate, it's Sagittarians!
Damn, Tony. I was so stoked to see this video. I've owned a bunch of Mark 8's over the years, including one with a 100hp shot of nitrous. These cars have always been dirt cheap for the amount of luxury/performance they have. They can be a pita to work on at times (even getting the oil filter out sucks) but overall, I've really enjoyed them over the years. Can't wait to see the next episode where you take it to the track!
goes to show it is not an average engine
My favorite build at the moment. Absolutely love the 32v 4.6 💯✌️
4,000 dollar car, $1,500 Dyno charge,
Worth every cent, nice build guys.
hance
This channel is great… step by step by step!!! Awesome!! Ty!!
I've tried my own hand at welding before (Not the worst but I definetly need more practice lol), and those are some nice beads he's laying down on the exhaust and intake work. Very nice.
I love these videos. I really wish they gave a breakdown of how many hours a shop would bill for this type of job. That way we could do our own math with our local shops.
That is a awesome car, the chassis, the engine the interior, its all nice stuff. I think they were all air ride.
Nice vid and as said below, it's nice that it's single build vid. Keep the interesting stuff coming.
Those turbos just went up a smidgen In price lol. Totally getting one for my 300,000 mile Ford v10!
Do it and make *yes* lbft of torque!
Awesome idea , Tony never fails to impress 👏
"Sucks in all kinds of fresh air, leaves and little children running by". Classic.
Wow! You guys got that car sounding fantastic with the second turbo replacement, nice job. 👍👍👍👍 you guys got that car pushing 493 HP? SWEET
Looks like granny's old car but goes like a bat outta hell! This is a fun build
That's awesome guys. 👌 I've been looking into doing a little turbo on my haul truck for a little extra power on hills. This might get me rolling fairly quickly and cheap.
Watching you hang off of the exhaust reminded me that I saw a lot of videos lately of cars falling off lifts
You should make this one its own Playlist. Love it!