Hi, I just got EnduraPro Plus delivered for model y. would you mind sharing the torque specs? and maybe recommended stiffness settings for modley awd? Thanks again for videos.
At 3:57 On the front shock installation. How did you get that upper ball joint assembly, the triangle with the upper ball joint, to move freely up to the top, out of the way, like that? On mine it just pushes back down. It doesn't freely move up and out of the way like that. Did you have to remove something to get that to happen?
Hi George, the front upper arm has a 13mm head bolt on either side of it. Loosen those and it will move. Just make sure you tighten it back into the same position when done. There’s a bushing there that you want to preload in the correct place.
You mentioned installing eibach lowering springs with TEIN ENDURAPRO struts. How low are the EIBACH springs made for, 1.5 or 2.0 inches? Assembling all together, Did the car reach the lowering specifications of the springs to go low.
Loved your video thanks! What percentage of a difference in softening the model 3 would you say the TIEN Endura dampers have? Not the plus just the regular Endura. Thanks!
I really don't know. We never use the non adjustable ones on the dual motor 3 or Y. You might need adjustable ones. What year is your LR? If it's a 2023 with the oem comfort then that is probably why you don't feel a difference.
the RWD part # used here is different than what you would use. Please email us zevcentric@gmail.com. Your version is backordered quite a bit. We have a waiting list that's pushing into Sept or Oct.
Crazy how AI technology is able to face swap Rishie's face onto Steven, because we all know Rishie doesn't wrench, that has to be Steven wrenching with Rishie's deepfaking
Great information and video.
Hi, I just got EnduraPro Plus delivered for model y. would you mind sharing the torque specs? and maybe recommended stiffness settings for modley awd?
Thanks again for videos.
I wish you guys were located in SOCAL.
At 3:57 On the front shock installation. How did you get that upper ball joint assembly, the triangle with the upper ball joint, to move freely up to the top, out of the way, like that? On mine it just pushes back down. It doesn't freely move up and out of the way like that. Did you have to remove something to get that to happen?
Hi George, the front upper arm has a 13mm head bolt on either side of it. Loosen those and it will move. Just make sure you tighten it back into the same position when done. There’s a bushing there that you want to preload in the correct place.
You mentioned installing eibach lowering springs with TEIN ENDURAPRO struts.
How low are the EIBACH springs made for, 1.5 or 2.0 inches?
Assembling all together, Did the car reach the lowering specifications of the springs to go low.
ua-cam.com/video/0m8GNBfUudI/v-deo.html
Loved your video thanks! What percentage of a difference in softening the model 3 would you say the TIEN Endura dampers have? Not the plus just the regular Endura. Thanks!
@@nooshiofficial its too hard to quantify. Definitely way better than stock though.
what wheels are those?
Have them on model y.
Good ride but strange sound from rear ones
How does it ride? LR OR MYP? I got 21 MYP
that could be typical of a twin tube design. Where did you set your damping and did you install it yourself? Where did you purchase them from?
Bought here in europe from tein dealer.. Instaled by service garage with experience...
Having it soft.. 5 clicks from soft toward hard
@@Pennychaser1
Ride is super comfortable... Mybe too soft. Will add some clicks and see.
@@Pennychaser1 Lr. China made 2022
Hi just installed the Tein Endura Pros on MYLR AWD but dont feel any difference. What else do you recommend I do? I am based in Germany if that helps.
I really don't know. We never use the non adjustable ones on the dual motor 3 or Y. You might need adjustable ones. What year is your LR? If it's a 2023 with the oem comfort then that is probably why you don't feel a difference.
3 and Y's use same part numbers?
the RWD part # used here is different than what you would use. Please email us zevcentric@gmail.com. Your version is backordered quite a bit. We have a waiting list that's pushing into Sept or Oct.
Would this work on my 2019 long range model 3
Please send me an email with your location and if this is single or dual motor. Zevcentric@gmail.com be happy to help.
@@zevcentric sent. Thanks
Crazy how AI technology is able to face swap Rishie's face onto Steven, because we all know Rishie doesn't wrench, that has to be Steven wrenching with Rishie's deepfaking
Yup it's AI. IYKYK. I'm used to not getting credit anymore lol. Wrenching for nearly 30 years someone else should be taking the baton.
Hahahah