you don't need to cut the carpet just pull it out from the trim and fold it back to reveal the pump cover. the hardest part is getting the seal in position. you cant tell if you got it right till you brim the tank then it;s diesel all over the forecourt. I had to do it again and stuck the seal in position with silastic then eased the pump all the way in, worked fine.
i cant stress enough to make sure you fit the rubber ring seal first into the tank mouth so the soft thin lip is below the tank rubber ring, then slide the pump down into place. i spent about an hour trying to fit the metal ring with no luck till watching the last bit of the video and figuring this out.
Is it same for the petrol version on V8 2001 model? Is there any such in detailed video link available? I smell fuel when I fill the tank but on half tank don't get the fuel smell during driving.
I haven't checked the pressure regulator, what i did do was check the psi in the front valve and its giving me a little over 50 psi. Is that good enough?
This is a great example of not believing everything you see on UA-cam. I spent ages messing about trying to screw back the black ring using this bloke's method. Then I looked elsewhere and 1 video and 1 site suggested the ring must go into the tank first. Once I did this it slipped in really easily and I did it up first time. So poor information mate. You need to take this video down as it is wrong.
James Giddings , it actually says that the rubber fits around the lip on the tank if you watch back, ive probably fitted more than a hundred pumps this way pal and im guessing this is your first 👍, sorry this didnt help you
danny latham it doesn't sit on the lip though, it needs to be maneuvered in. Anyway, anyone doing this for the first time will benefit from the video link below... Try both ways and see what works for you. Cheers pal Go to 12 minutes in for the start of replacing seal.. ua-cam.com/video/qW-wDtmtwok/v-deo.html
Thanks for posting this as it give me the confidence to tackle the job, cheers mate.
Thanks Danny. Great instruction .
Love to see u using red diesel !
Thanks for the demo.
Nice one. Taa Bud.
Awesome, saved e heaps of time.
you don't need to cut the carpet just pull it out from the trim and fold it back to reveal the pump cover. the hardest part is getting the seal in position. you cant tell if you got it right till you brim the tank then it;s diesel all over the forecourt. I had to do it again and stuck the seal in position with silastic then eased the pump all the way in, worked fine.
i cant stress enough to make sure you fit the rubber ring seal first into the tank mouth so the soft thin lip is below the tank rubber ring, then slide the pump down into place. i spent about an hour trying to fit the metal ring with no luck till watching the last bit of the video and figuring this out.
Thankye very much fur that bit o advice . Wis trying fur ages, then read your comment an got it no problems 👏👏👏 🎉
Is it same for the petrol version on V8 2001 model?
Is there any such in detailed video link available? I smell fuel when I fill the tank but on half tank don't get the fuel smell during driving.
What if I told you... I broke one of the clips? Where can you buy new ones?
daft metal ring won’t stay screwed down any suggestions thanks
What is the desire psi on the fuel pump?
Hi, good question, if I remember rite the fuel fed to the fuel pressure reg should be about 4 bar
I haven't checked the pressure regulator, what i did do was check the psi in the front valve and its giving me a little over 50 psi. Is that good enough?
This is a great example of not believing everything you see on UA-cam. I spent ages messing about trying to screw back the black ring using this bloke's method. Then I looked elsewhere and 1 video and 1 site suggested the ring must go into the tank first. Once I did this it slipped in really easily and I did it up first time. So poor information mate. You need to take this video down as it is wrong.
James Giddings , it actually says that the rubber fits around the lip on the tank if you watch back, ive probably fitted more than a hundred pumps this way pal and im guessing this is your first 👍, sorry this didnt help you
danny latham it doesn't sit on the lip though, it needs to be maneuvered in. Anyway, anyone doing this for the first time will benefit from the video link below... Try both ways and see what works for you.
Cheers pal
Go to 12 minutes in for the start of replacing seal..
ua-cam.com/video/qW-wDtmtwok/v-deo.html