GODOX AD400 PRO FLASH GUIDE // How to use the Flashpoint Xplor 400 Pro
Вставка
- Опубліковано 25 тра 2020
- GODOX AD400 PRO FLASH GUIDE takes you step by step through using the Flashpoint Xplor 400 Pro and understanding all of the features for control. This video is a guide to using the Godox Witstro AD400 Pro Flash / aka Flashpoint Xplor 400 Pro. In it I go over mounting the Godox AD400 Pro, button operations and functions, as well as the cryptic custom functions menu. If you are looking for how to learn flash photography, check out my beginners guide to off camera flash playlist.
Buy Godox AD400 Pro here: adorama.rfvk.net/Gy0a6
My entire kit of gear : kit.co/robhallphoto
Follow me on Instagram: bit.ly/2sj7Lsq
Where I get Music and Effects: share.epidemicsound.com/tw3LG
• Off Camera Flash Photo...
If you are looking for guides on the X series transmitters, you can find those here:
Godox X1-T : • Godox X1T Control Guid...
Godox X2-T : • GODOX X2-T GUIDE how t...
Godox X-Pro : • Godox XPro (XPro-C) Wi...
Thank you for your instructions. Others talk too fast to follow. And you give perfect step by step setup.
Dang!!! Finally I watch a full “how to” video without all the unnecessary commentaries from the person speaking !!! Thank you !!! I’ll be following you now!!
It is even easier to learn the flash from your video than the manual! Thank you so much! I think you should ask if you can get paid from Flashpoint by making this kinda tutorial!
Just ordered this. Thanks for the video straight to the point with no fluff… already hit the like button.
and how do you like your AD400?
Excellent Video... Thanks !!
I just got mine in the mail and I love it!
Just got this with the r5 and 85mm f2 + 35mm. So excited to use it !
Great tutorial… thanks!
Thank you for the video! I just purchased one!
and how do you like your AD400?
exactly what i needed
Great video. Thanks…
Question: Will the battery continue to charge off the charger while also using it mounted on the strobe during a shoot?
Thanks Rob. The Model setting of CONT (continuous) or INTER (intermittent) are useful if one is shooting at slow shutter speeds where the model lamp can influence the exposure and white balance of the file. In the INTER mode the model lamp turns off and is delayed @1 second after the flash fires.
@Laurie Goulding wow! It worked for me too! Even put 20 bucks in my checking account- wow!!
Great video! Unfortunately my flash arrived today, turns out the test button doesn't do anything :( There's only one way you can insert the bulb so you can't miss, and the modelling lamp seems to work fine. Flash however, doesn't seem to work. Very unfortunate that a new unit would come with a faulty bulb...
hey Rob- Where do you recommend getting barn doors for this. I need to stop spill from a white background on subjects. What do you think is the best solution for that?
thanks for the video ....a video on best practices when two shooters share the same light would be great. I often shoot with a cannon shooter and we have to often check with one another if we make a flash power change....is there any way to put one trigger in slave mode?
I've covered that before here : ua-cam.com/video/PCn2Dk1IAPk/v-deo.html
Hey rob. I hope this finds you well. Is there a way to mount the ad400 on an umbrella. Seems impossible for me
I’m looking to purchase my husband a new light for Father’s Day he shoots with a Cannon Is this a good light or is this compatible with the cannon and can he use this with another light
Hey Rob, I don't know if you know the answer. Any help with be grateful. My modeling lamp stopped working for some reason. It did have 2 falls from the wind. I just bought the extension head extension head. The modeling light doesn't on it neither. Thanks
@roberthall what happened to “keep on shooting”? 🤷🏻♂️
Thanks for this! I wish there was a way to change the increments from 1/10 to 1/3.
you can within custom functions of trigger on X2-T, XPro, R2 Pro II.
I have a question i don’t know if anyone has run into this issue. I would love to see if u could help please. So I have this unit and the xpro trigger shooting with a Nikon d810. The issue I been having is the unit won’t fire in some cases and Is not and over heating issues because this will happen at the begging of my shoot maybe 20 shots in. I contacted adorama and they said to change the stand by setting on the trigger to off and I did but the issue still continues it. Any advice or has anyone has come across with the same issue? Also I am NOT using rechargeable batteries
is the ad400pro flash compatible with the x2t transmitter?
is it compatible for canon 5d mark iii or not thanks
I need a light to use with a film camera, that can't take the remote. I will use PocketWizards. Can this light set 1/10 stops?
I don't have the x remote I only have the FC one without the screen how can I connect 4 lights maybe with slave mode? Please help
Thanks for this tutorial. However, I can’t figure out how to attach the ad400 to my godox softbox - with or without the Bowens ring. Can you perhaps make a video for this? There is absolutely nothing on the internet about this.
Provided you have a compatible (bowens or Godox mount), it's really as straight forward as lining it up and rotating it.
I recently started using a Canon R5, along with a Flashpoint XPLOR 400 Pro & R2 Pro MarkII.
.
I've updated ALL the firmware in every device in the chain, but for some reason I still keep getting misfires every 2nd or 4th shot (or not flash at all).
.
I've also scanned for the best frequencies on the trigger, switched to also using the "ID", use Mechanical Shutter (below the Sync Speed), and I stick to "One Shot" Focus mode & single point focus.
.
Once I turn the audible beep on, for the XPLOR 400, I can hear the trigger and light communicating but no flash (full battery). Any suggestions?🤔
Replace it.
Thanks for the information! Will it damage the unit or the battery to charge it with the ac power cord while your using it? I have seen videos that claim you can do this...
No, you should not do that. Anyone who says you can is wrong, it's in the manual not to as it creates battery instability.
@@robhallphoto Thanks!!
@@robhallphoto Hi Robert, I received my units...I set my camera on interval for every 3 seconds, set the AD 400 on 100% to see how many pops I would get. It failed miserably at about 45 pops it took 10 seconds on average just to recycle. Then the temperature warning came on so I just turned it off. I did the same test with my second unit I purchased same results. Not very impressive in my humble opinion. What is your opinion?
@@robhallphoto so does that mean that you basically can only use the unit with battery power?
@@flytz311 No, you can use the AC adapter if you want to run it nonstop.
Hey Rob,
Have you had any issues with the mounting bracket on these lights not holding a large softbox? When I try to mount anything larger than a 25" beauty dish the light starts to sag because the bracket can't support the weight. I'm trying to find a solution to prevent this. Any thoughts?
I don't have an issue with it. Yes, it requires more tightening than a small modifier, but I don't have a problem keeping it's position with larger modifiers. Although I will admit, the 400 pro does not tend to be a key light in my studio setups very often because I'm more likely to use our 1200 Pros / 600 Pros first.
You can always replace the slick blue washer with a rubber one like I did on the 300 pro mounts.
@@robhallphoto Thank you for the response! I actually did that with one of my 400s and it's still won't hold its position. I was trying to use a parabolic modifier on it.
Hi Robert, I received my units...I set my camera on interval for every 3 seconds, set the AD 400 on 100% to see how many pops I would get. It failed miserably at about 45 pops it took 10 seconds on average just to recycle. Then the temperature warning came on so I just turned it off. I did the same test with my second unit I purchased same results. Not very impressive in my humble opinion. What is your opinion?
I guess he has no opinion
I don't see it in the AD400 Pro's menu but I'm asking anyway. Is there a Group Shooting function in this light? I know the AD600s have it (where multiple people can shoot with one light at their own power settings easily).
Group mode is a function of the triggers and speedlights (transmitters), not a function of the the lights (receivers).
I can't get the x pro s to sync
Would love any help for my problem with the Flashpoint Xplor AD 400 Pro: I am using a Canon 5DSR and the R2 SP trigger. The problem occurs like this:
I will set the light to manual, wireless is on, Group A, Channel 1, and the light is set to 1/2 power. I trigger the light and if fires. But then the power will switch to another setting like 1/64th power. I want it to stay at the setting I set it too. It is extremely cumbersome to constantly have to switch the power setting back to 1/2 power. Could you please tell me how to make the power setting stay where I set it?
Change your channel. Another product using 2.4 GHz wireless is interfering. It should not change unless you change it.
Thanks for responding but I tried two different channels and it still moves to another power setting after a pop. I've only had this light for 7 months.
Can you adjust the color temperature like the ad300pro?
Can you use this as a continuous light ?
You can, but I wouldn't. It's not a good color temperature, not very powerful, and has a loud fan respective to it's brightness.
I am conflicted is the AD 400 PRO the same as the Flashpoint Xplor 400 pro?
"Flashpoint" is Adorama's (NYC Camera Store) exclusive label/brand for all Godox model. They're literally one in the same. So, yes, AD 400 PRO = Flashpoint Xplor 400. If you live in the US, you can get the warranty and support from Adorama when you purchase Flashpoint lights.
Is there a way to use ttl mode like a lightmeter? Fire one shot in ttl and switch to manual mode before second shot to dial in your exposure. Unfortunately the ad400 modes doesn’t „talk“ to each other. Or am I missing something here?
That would be the TCM feature (tcm convert manual). It's available on certain transmitters, but honestly with the amount of button presses required, it's faster to just start at 1/16 in manual and go from there. The reason the modes don't talk to each other (carry over TTL power to manual) is because of manual memory. It remembers the last manual power setting you were at, because some triggers the only way to turn a group off is to cycle between off, ttl, M. If it carried the TTL signal in that scenario you would lose your manual power setting every time you disabled and re-enabled a group.
@@robhallphoto thank you. This is what I was looking for. But it seems there is no dedicated tcm function for ad400 only flashlight, 200j, 350j and 600j. 600j and 360j work quite good but not perfect. And it seems there is no firmware upgrade to get 400j into the menu.
@@larsfranzen511 there is a new XPro trigger coming out and it’s got the TCM for speedlite, 100j, 200j, 300j, 400j and 600j. It’s being launched for Leica cameras first but Godox have said they will come out for the other brands after.
@@charliegreen1989 thank for that info. Is there a release date already?
@@larsfranzen511 they are releasing the Leica version first which is currently available to pre-order but Godox have said other brands will follow.
8:35 what video? I've already ended up on other channels at this point to find out what that masking is
ua-cam.com/video/rAvw6x6segs/v-deo.html&ab_channel=Sharpen
Y the bulb gets black in the bottom???
Does INTER save battery because it cycles
Yes, but not in a meaningful way. If it powers down for a 1/2 second and you’re taking a photo every 8 seconds, it would only last about 6% longer.
@@robhallphoto you are the man. I bought godox because of you
This looks like a great deal for $479