BRAVO DUDE! I have a 16.0.2 that I am working on. I will replace 5V regulators and a bulged cap on power supply. If I can't fix, I will bring to you in Manila. I live in Guimaras, Iloilo. You seem to know your stuff as you have demonstrated. How to contact you?
Sir goodday po. Sir any idea po pag walang phantom power sa mga xlr inputs po. Lahat po wla kahit nkaswitch on na po. Check ko pau present nmn po 48vdc
Ya sure Yes, yes, man, once it happened that I was in a show and there was a problem of power fluctuation, the earthing was very high, so I was checking the income with the tester, and by chance, the auxiliary input was in the wrong channel. On the channel number 32, as soon as I put the tester on it, it has shorted the negative and positive, so a slight spark and the IC of the channel went off.
@@FixYahTv If it is possible that the input of that channel is actually when I plug it in, then the gain and its cue are running but the input is not inputting in that channel. The input is not working and there is another problem when today it happened. As soon as I do it, it is 32 by 32 channels. So that is probably a grounding problem
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
BRAVO DUDE! I have a 16.0.2 that I am working on. I will replace 5V regulators and a bulged cap on power supply. If I can't fix, I will bring to you in Manila. I live in Guimaras, Iloilo. You seem to know your stuff as you have demonstrated. How to contact you?
Thank you. What seems to be the problem of your unit? Maybe i can help..
good repair a lot of work well done.
Hello new friend have a great time nice stuff
Sending full support.daisy
Sir san po office/shop nyo? May ipapagawa din po ako sa inyo 16.4.2
Novaliches po sir.
Sir goodday po. Sir any idea po pag walang phantom power sa mga xlr inputs po. Lahat po wla kahit nkaswitch on na po. Check ko pau present nmn po 48vdc
Sa IO module check for open smd resistor or burned regulator ic.
@@FixYahTvdba sir pag i on yung mga 48vdc na switch dpat lalabas sa XLR inputs yung 48vdc tama po?
Yes tama po kayo sir
@@nier14344
Bos san po ang shop niyo?
Novaliches Qc po.
Ano pinag kaiba sa 16.0.2 sir may idea kaba?
The 16.0. 2 has 4 Aux outputs for 4 mono or up to 2 stereo monitor mixes. The 16.4. 2 has 6 Aux outputs for 6 mono or up to 3 stereo monitor mixes.
Thankyou sir sa info. My idea kaba sir kung magkno rin sa ngayon ang ganyang model?
Sir, gusto ko din ipagawa 16.4.2 unit ko. Mahina ang left channel at wlang 48v panthom power. San po shop nyo sir, taga antipolo po ako. Salamat
Sir pwede po makahingi ng exact address & contact# po ng shop nyo? mahina po kasi output ng right ch ng 24.4.2 na unit namin,, dalahin po namin dyan..
anu po cause bakit nasisira yung output ic?
The most common fault is shorted cables or audio snake box. shorted cable stresses the i'c and damages it eventually.
I dont think so,small value of capacitor connected in series going to the out put…
Can you repair my TF5 yamaha digital mixer power supply ok…
Hi dear I have a problem my 32ai presonus last 32 Channal have no audio after input
Can you gave me more info about your unit?
Ya sure
Yes, yes, man, once it happened that I was in a show and there was a problem of power fluctuation, the earthing was very high, so I was checking the income with the tester, and by chance, the auxiliary input was in the wrong channel. On the channel number 32, as soon as I put the tester on it, it has shorted the negative and positive, so a slight spark and the IC of the channel went off.
@@FixYahTv If it is possible that the input of that channel is actually when I plug it in, then the gain and its cue are running but the input is not inputting in that channel. The input is not working and there is another problem when today it happened. As soon as I do it, it is 32 by 32 channels. So that is probably a grounding problem