You’re literally my go to 3:00am UA-cam “can’t sleep” channel hahaha please keep up the great content it’s so cool how knowledgeable you are on this! You gotta be THE guy when it comes to this! 😂
US Army here, my drill sgt. measured my m40 size by staring at me for a few seconds and then telling me not to move as he slaps one on me and covers the filter with his hand on my exhale. "Can you breathe private?" * aggressively shaking 'no' * "You're moving too much private. Can you breathe?" * pained pvt noises * "You can talk with it on private." "NO DRILL SERGEANT!"
17k+ nice to see your channel is growing at a steady pace. Keep it up but remember that a part-time additional paying job could be a better option for you whilst your channel & your patreon isn't bringing in enough money to exceed your material fees as hopefully the long term goal is to keep the channel sustainable! Good luck, your obviously going in the right direction :-)
For some reason I'm a size medium for a 3m 7800S , but a small in the 3m 6000 full face series, I tbough that maybe the 3m full face sizes were the same fit across their entire like of full face masks, but apparently not.
Regarding the improved versions Y/Upgraded ones is actually improvement in both ways, as you said, cheaper to make, but using a bit of thin rubber actually makes it easier for the users to pull off and put on the gas mask since the rubber isn't as stale or rigid as when you use thick rubber. However I still compare the thick and thin versions, some people name that the thin versions break more easier and that the thick versions can easier become stale or rigid if not cared for making them break more easier. Will come back with more information about that later. I also wonder about this site(soviet power) which sells both gas masks and extra filters. They talk about their filters being safe and no asbestos in them as they are post cold war filters but also later batches. created without asbestos. But how can one be sure? I have seen your warning videos, but they do apply to the old filters. (I am thinking that it would be a waste to get rid of perfectly safe filters that works.) The majority of the "safe to use" talks about as if asbestos is okay in smaller doses as it exists in most kitchen wares we use today and in higher dosages than the filters them self. (The later filters contain less than or 1% of it). I am more skeptical, but balance between safe and non safe as of now. I decided to send them questions and will be waiting for more feedback. Also sent some to test. Great videos as always, keep up the good work!
I think lots of sites selling Russian filters that claim them to be safe are just being selfish and trying to make money regardless of potential danger to customers. So far every Soviet filter test has come back as asbestos positive, if they claim their filters are safe they will be able to provide lab reports with negative results. However I very much doubt they will present these reports.
Indeed. My first thoughts also. I believe what you mentioned before is the way to go. Some good new and approved filters. Do you happen to have any list for approved and safe 40mm filters and know if there are any safe filters for the PBF out there?
Every modern NATO filter is perfectly safe, as 40mm NATO are made to a good standard. Same goes for Industrial filters from developed nations, I would avoid filter made in China or the Soviet Union due to asbestos use. Modern Russian filters are meant to be safe though, and no as far as I'm aware, all PBF EO-19 filters are the same.
Quick question, I measured my head and got 26cm exactly so I was wondering if I should get a size 1 and hope it fits and if it doesn't then use a mannequin head to stretch it out a bit or if I should get a size 2 and hope my head fits in it.
Weaponsandstuff93 My bad meant to say 26in not 26cm but I measured a bit more and got that I'm either a bit more than 26 or it exact. So should I go with a 1 or 2?
Weaponsandstuff93 I think he meant inches, not centimeters. I think that you'd be alright in doing so. If it doesn't fit, you can try to exchange or return it.
I've also got a 26in head, I got a medium but I think it'd sized wrong as it doesn't go. Far enough past my ears and doesn't seal well, can I stretch it?
Weaponsandstuff93 👍 Thanks, I am a prospective chemist and student worker in my department. I want to get one half as a joke, but also to complement my guns and other equipment. Which is kinda useless if I am dead. And with the state of America right now, well you get it.
the size charts are odd on sellers page, i have a large head (7 3/4 in fitted hats) and according to the chart they have, says i need an extra small which i dont believe.
My giant noggin can't fit in anything but size 4 soviet. Size 3 squishes my lower jaw toghether and pulls out my hair which is really annoying because all the SHMS masks I've seen are size 3 or smaller.
Hiya I’m wanting to buy a Forsheda F2 A4 gas mask but I cant find a size Guide anywhere. My heads from chin to back of my head 70cm. From side measure bottom of chin to top of head 25cm. From round the top of my head like a Rambo bandana 58cm. Any idea what size I am.?
Probably beating a dead horse, but what are the things that you need to look for in a GOST filter? Any keywords, places to look? On ebay I could only find 1 seller and that was with 2 different ABEKPD and A1P3 codes so where do I find explanations for those?
Thanks, just found the video I was looking for. I've own a GP-5 gas mask that a friend gave me as a Christmas gift so I was just wondering about getting a replacement filter since the old ones aren't safe to use (even though I've worn it a couple of times before i found out).
Question, I ordered a size 3y gp-5 thinking it was the right fit for me (this was based on the measurements the seller used. Also my head from back to chin is about 27.25 inches) but I noticed some things, such as the ear indents seeming further up the mask than my ears actually were, and my eyes seemed higher up in the lenses when I looked in a mirror; do you think I should go up to the next size? Also would the mask fit better if I shaved my hair (I'd say it's about medium length)? One more thing: Do all soviet helmet masks use the same or similar head measurements for the size?
I would like to order a MSA Millennium gaz mask, could you give me some advises which size should i take ? there is no guide sizing on the internet for this model and there is no dealers in my country (France) where i could try it. This model is available in S, M and L.
I want to buy a gp-5 gas mask the seller says it's new and never used. I fear it can have some sort of contamination on it. Should i worry, or it's just some sort of bad paranoia?
I bought my own GP-5 gas mask but only for recreational use (photography sessions ). Is there any safe filter I could by and add on to the GP-5? The looks of it is creepier with the filter :)
@@Weaponsandstuff93 Thanks a lot! By the way, what should I do with the original GP-5 gas filter? Do you know if it is safe to keep it at home or should I get rid of it (and in this case, what should I do?)
@@jorpimenta do not trowh it away cuz asbestos will spread every whare getting asbestos can cause lung cancer Just force the seal and dont unplug and keep it also it has a story its old
I have a question so i misured my head it's 58 cm (i think it's small but maybe because I'm still a teenager idk) what size should i get, the small is 63cm and the medium it's from 63,5 to 65cm. And btw I'm talking about the amazon GP 5
Where is a good place to buy one that’s real and comes with mask, bag & filter ( I won’t use the filter it will be just a prop ) thanks @weaponsandstuff93
@@Hadrian9707 I have a large head (61cm circumference) and the M 65 in size 2 (M) fits me very well. The M2000 (replacement of the M65) i have also has size M.
@@Hadrian9707 forehead to back of the head. In the Bundeswehr nearly everyone gets issued size M and only if your head is very large or very small you get size S or L, so I would recommend going with M to ensure it seals properly.
Great informative vid.......... Just wanted to point out that Celtic is pronounced Keltic not seltic. Seltic is the pronunciation for the Scottish football team only.
Probably, China made copies of the ShM series, the brilliance of helmet masks is they basically fit any head if you stretch them over it due to how the rubber works.
Hey buddy! Really love your videos. they're helpfull and contain a lot of info! Especially this one really helped me because it seems like I meassured my head wrong... I first meassured arround the forehead and back which gave me 61cm. So I ordered a GP-5 sized 3 Now I meassuered it chin to the back and I got 71cm... I can put the size 3 on, but it feels really too tight and my ears are not completely covered. SHould I sent it back and get a Size 4, since this appears to be the biggest one?
@@Weaponsandstuff93 Thanks! I will give it some time and wear it a couple of time during the next week. Another question: I realized that my eyes are really far up in the glasses when looking into a mirror. Comparing it to your eyes positioning. Is this normal? Or caused by the size?
Ideally the eyes should sit in the very middle of the lenses, but for a lot of people that's not guaranteed, also with helmet masks, the bottom sits on your chin area, not the throat so make sure you have the mask in the right position.
@@Weaponsandstuff93 Can the M40A1 be modded for more nose real estate? Or should the slight nose discomfort/restriction be tolerated. I fit it fine otherwise.
@@Weaponsandstuff93 I measured my head and size 3 is the best for me. However when I got my TF-1, it's a size 4. Strangely, it's still kind of small for me.
@@Weaponsandstuff93 I measured my head and size 3 is the best for me. However when I got my TF-1, it's a size 4. Strangely, it's still kind of small for me.
@@Weaponsandstuff93 I measured my head and size 3 is the best for me. However when I got my TF-1, it's a size 4. Strangely, it's still kind of small for me.
Makes sense, I'm Polish, Russian, French, German and Scottish American, Soviet masks fit well while I find southern European masks and Asian masks fit me worse
My GP5 is a 3 medium. It fits fine but when I look at any of my pictures, I can see my eyebrows through the lenses (obviously my eyes too)... could this mean my mask is too small or just not positioned on my head properly?
Just started the vid but I've been trying to figure out how I'm supposed to find out what gas mask size I am. I wanted to make a Halloween costume that would need one
You’re literally my go to 3:00am UA-cam “can’t sleep” channel hahaha please keep up the great content it’s so cool how knowledgeable you are on this! You gotta be THE guy when it comes to this! 😂
Lol same XD
US Army here, my drill sgt. measured my m40 size by staring at me for a few seconds and then telling me not to move as he slaps one on me and covers the filter with his hand on my exhale.
"Can you breathe private?"
* aggressively shaking 'no' *
"You're moving too much private. Can you breathe?"
* pained pvt noises *
"You can talk with it on private."
"NO DRILL SERGEANT!"
That's a right proper BDSM session!
Can you do a video on gas mask hoses why they were used and what are advantages and disadvantages of them?
I have before, several times.
Weaponsandstuff93 I will go find it
Dude youre such a good youtuber.... you care about your subscribers replying to all comments. Keep it up
Cheers
I want an entire video of you talking with that russian accent
Russian accent 20/10
That was Russian? I thought it was Borat 😂😂
I thought it was British
@@dubo2057 yeah its british
Brih it's British
It's obv brihish trying to hard to be borat
Awesome thumbnail my man
Thanks
17k+ nice to see your channel is growing at a steady pace. Keep it up but remember that a part-time additional paying job could be a better option for you whilst your channel & your patreon isn't bringing in enough money to exceed your material fees as hopefully the long term goal is to keep the channel sustainable!
Good luck, your obviously going in the right direction :-)
would you recomend me to buy a Gp-7 gas mask or does it have any asbestos or problems?
The filters contain asbestos, it's a crap mask as well.
True
For some reason I'm a size medium for a 3m 7800S , but a small in the 3m 6000 full face series, I tbough that maybe the 3m full face sizes were the same fit across their entire like of full face masks, but apparently not.
I want a m50 gas mask what part of my head should I measure also, I notice you wear a small what are your measurements so I can compare
Same
Thanks for the information on soviet masks☺
Glad it was helpful.
I went on eBay to buy an Israeli gas mask, but there are two and one is more expensive. Which one should I buy so I don't get ripped off?
You have buyer protection on eBay so it doesn't matter.
I want Shms gasmask
- Get Czech m10
( worst nightmare you ever had from wish granter)
Merry Christmas
I'm guessing Warsaw pact masks are pretty similar to Soviet masks?
Depends on the mask but some are pretty identical size wise.
I got a gp-5 gas mask that is 1Y as the seller didnt give a choise or what size it was and is very tight.
Is there a way I could use a Czech m10 for airsoft I'm trying to make artyoms mask and helmet from metro lastlight
If you could get polycarbonte outserts maybe, otherwise no.
I have a GP5 it's chokingly tight around my chin and it doesn't go over my ears is it too small. Edit mine is no. 0
Thats the smallest size for GP5. Size 2 or 3 fit most people.
Regarding the improved versions Y/Upgraded ones is actually improvement in both ways, as you said, cheaper to make, but using a bit of thin rubber actually makes it easier for the users to pull off and put on the gas mask since the rubber isn't as stale or rigid as when you use thick rubber. However I still compare the thick and thin versions, some people name that the thin versions break more easier and that the thick versions can easier become stale or rigid if not cared for making them break more easier. Will come back with more information about that later.
I also wonder about this site(soviet power) which sells both gas masks and extra filters. They talk about their filters being safe and no asbestos in them as they are post cold war filters but also later batches. created without asbestos. But how can one be sure? I have seen your warning videos, but they do apply to the old filters. (I am thinking that it would be a waste to get rid of perfectly safe filters that works.) The majority of the "safe to use" talks about as if asbestos is okay in smaller doses as it exists in most kitchen wares we use today and in higher dosages than the filters them self. (The later filters contain less than or 1% of it). I am more skeptical, but balance between safe and non safe as of now. I decided to send them questions and will be waiting for more feedback. Also sent some to test.
Great videos as always, keep up the good work!
I think lots of sites selling Russian filters that claim them to be safe are just being selfish and trying to make money regardless of potential danger to customers. So far every Soviet filter test has come back as asbestos positive, if they claim their filters are safe they will be able to provide lab reports with negative results. However I very much doubt they will present these reports.
Indeed. My first thoughts also. I believe what you mentioned before is the way to go. Some good new and approved filters. Do you happen to have any list for approved and safe 40mm filters and know if there are any safe filters for the PBF out there?
Every modern NATO filter is perfectly safe, as 40mm NATO are made to a good standard. Same goes for Industrial filters from developed nations, I would avoid filter made in China or the Soviet Union due to asbestos use.
Modern Russian filters are meant to be safe though, and no as far as I'm aware, all PBF EO-19 filters are the same.
@@Weaponsandstuff93 come no filtri al cromo sarebbero sicuri? Ma per favore
How many cm is your head? I'm trying to reference, because my head is 70 cm and I'm not sure wether to buy 3 or 4.
About 68cm, so I find some Soviet masks fit me better in 2 or 3.
My head is 70-71 cm. Size 1 of the Israeli masks (maximum size?) Feels a little tight. Size 3 (small size) does not fit me well.
Question.
If you wear a SChMS Daily. Will it eventually stretch/wear out the rubber?
Quick question, I measured my head and got 26cm exactly so I was wondering if I should get a size 1 and hope it fits and if it doesn't then use a mannequin head to stretch it out a bit or if I should get a size 2 and hope my head fits in it.
I think you measured wrong, 26cm would be too small for basically any mask.
Weaponsandstuff93 My bad meant to say 26in not 26cm but I measured a bit more and got that I'm either a bit more than 26 or it exact. So should I go with a 1 or 2?
Weaponsandstuff93 I think he meant inches, not centimeters. I think that you'd be alright in doing so. If it doesn't fit, you can try to exchange or return it.
I've also got a 26in head, I got a medium but I think it'd sized wrong as it doesn't go. Far enough past my ears and doesn't seal well, can I stretch it?
Hungarian PMG copies in size 3 fit the same head as Czech M10M.
So as an an American of British/Welsh, Germanic and Slavic ancestry I should just go with one of the European styles and hope for the best?
Should be fine I imagine, I've only found M65 masks with the lack of Peripheral seals to be unforgiving to the wrong face shapes.
Weaponsandstuff93 👍 Thanks, I am a prospective chemist and student worker in my department. I want to get one half as a joke, but also to complement my guns and other equipment. Which is kinda useless if I am dead. And with the state of America right now, well you get it.
the size charts are odd on sellers page, i have a large head (7 3/4 in fitted hats) and according to the chart they have, says i need an extra small which i dont believe.
My giant noggin can't fit in anything but size 4 soviet. Size 3 squishes my lower jaw toghether and pulls out my hair which is really annoying because all the SHMS masks I've seen are size 3 or smaller.
Hiya I’m wanting to buy a Forsheda F2 A4 gas mask but I cant find a size Guide anywhere. My heads from chin to back of my head 70cm. From side measure bottom of chin to top of head 25cm. From round the top of my head like a Rambo bandana 58cm. Any idea what size I am.?
Probably beating a dead horse, but what are the things that you need to look for in a GOST filter? Any keywords, places to look? On ebay I could only find 1 seller and that was with 2 different ABEKPD and A1P3 codes so where do I find explanations for those?
I've done videos on this before so you might want to watch those.
ABEK means it's a combination filter.
Thanks, just found the video I was looking for. I've own a GP-5 gas mask that a friend gave me as a Christmas gift so I was just wondering about getting a replacement filter since the old ones aren't safe to use (even though I've worn it a couple of times before i found out).
pop@@Senzorei
Can an asbestos suit protect me against any gas
fat man dunno
It probably works just like an NBC suit but I dunno
Depends if it's waterproof.
Weaponsandstuff93 water wont go through it unless I hold it up against a tap otherwise the water just sits on it
Weaponsandstuff93 ps love your videos
I bought a gp5 size 1 I’m 12 in January, would you say that size 1 was probably the right decision
No idea.
it depends. I am 14 and bought a size 2, which is a bit small, but that isn't too bad, so a size 1 should work.
Turns out size 1 is way too small 😕
Over here 13 with a 3y but I have a bigger head
Question, I ordered a size 3y gp-5 thinking it was the right fit for me (this was based on the measurements the seller used. Also my head from back to chin is about 27.25 inches) but I noticed some things, such as the ear indents seeming further up the mask than my ears actually were, and my eyes seemed higher up in the lenses when I looked in a mirror; do you think I should go up to the next size? Also would the mask fit better if I shaved my hair (I'd say it's about medium length)? One more thing: Do all soviet helmet masks use the same or similar head measurements for the size?
Yes all Soviet helmet masks use the same sizes pretty much, and you really need to shave your hair off for a Soviet mask.
I do notice that while the shms mask I have fits well and is quite comfortable, the ears are in totally the wrong spot.
Then you have the wrong size or head shape for the mask.
Any guides for M50?
Just got a size 4 GP-5. It's almost a two person job to get it on. I didn't think my head was that big.
Soviet helmet masks are typically tight when you get them but the feel normal after a while
@@hronybruh1500 Does the rubber relax a bit?
Is there any documentation online talking about gas masks being shaped for different ethnicities?
It's simply not based on ethnicity but the facial structure.
Good video and well explained and especially the ethnic size of face structure.
Cheers, wonder if someone will say "racist" for saying it.
Weaponsandstuff93 hopefully people aren’t that stupid. But it’s 2017
Romanian guy here, we had the same measurements here. 3 medium 4 big. i have a 3 gp5
i think only Hungary had the switch sides.
So, I bought a gp5 off of amazon and the only 2 sizes were 0 and 1 should I just take that as 1 and 2?
For Russian/Soviet gas masks:
0у = X small
1у = small
2y= medium
3y= large
4y= x large
Do you have a gas mask chart for the m40???
I would like to order a MSA Millennium gaz mask, could you give me some advises which size should i take ? there is no guide sizing on the internet for this model and there is no dealers in my country (France) where i could try it. This model is available in S, M and L.
my mask is a little to big only the chin isn't airtight what should I do
Not much sadly if it doesn't have straps you can tighten further, you'll need a smaller size
@@Weaponsandstuff93 I have gp5 ;c no straps just hair removal rubber
In my GP-5 carry pouch there is a container of some sort of soap or wax. I looked at it, and I just want to know what that is and if its safe.
It's probably paste to prevent fogging, you wipe it on the inside of the eye lenses.
Okay, thanks.
I just ordered a GP-5 but it didn't said what size it was anywhere. I hope it fits properly :/
Hopefully
How do you talk with gp-5 lorge
which size of British S10 mask should I get?
I had got a Russian GP5M of size 3 (the seller says it is equivalent to large size (58-60cm) )
large should be 67or 68 -70
I been wanting a gp-5 mask for myself I have an mc-1 mask with gost filter
Cool
Im 11 and i want a gp5 is there one that will fit me
If my Warsaw pact size is a 2 should I get an s10 in size 2 or a size 3
Size 2 GP-5 etc is a small-medium in most masks so that would be an S10 size 10 probably.
@@Weaponsandstuff93 cheers👍
I want to buy a gp-5 gas mask the seller says it's new and never used. I fear it can have some sort of contamination on it. Should i worry, or it's just some sort of bad paranoia?
The mask itself will be fine but don't use the green filter with it.
@@Weaponsandstuff93 Okay i know the asbestos, danger. I think i might already inhaled some asbestos from an hungarian filter XD A bit scary.
I bought my own GP-5 gas mask but only for recreational use (photography sessions
). Is there any safe filter I could by and add on to the GP-5? The looks of it is creepier with the filter :)
For cosmetics any NATO filter can be forced onto the mask and those are safe to breathe through
@@Weaponsandstuff93 Thanks a lot! By the way, what should I do with the original GP-5 gas filter? Do you know if it is safe to keep it at home or should I get rid of it (and in this case, what should I do?)
@@jorpimenta do not trowh it away cuz asbestos will spread every whare getting asbestos can cause lung cancer Just force the seal and dont unplug and keep it also it has a story its old
Thank you very much!!
Glad you like it.
Can you do a video on your favorite gas mask for each country
I might do a few of my other favourite masks, it would get way too long if I did it by country.
i got this gasmask, what is it?
GP5M
Where can I order a M size Gp-5?
eBay it will be called size 2 or 3.
if you have a beard, is the mask seal compromised?
Yes bro
Yes
A 65 cm head,what size should i get for a gp5?
Size 4
Hey weap do you think wearing a balaclava/ski mask while having long hair would help with wearing mask like the gp 5?
No it would break the seal of the gas mask.
actually i tried and got a seal, but I also get a seal without it and also have long hair.
My gp5 is a little tight but I makes a seal so I’m good
Is there any negative effects for wearing the M76 gas mask with no filter?
Only that it won't work.
Thank you i just need it for pictures and roleplay ☺
I have a question so i misured my head it's 58 cm (i think it's small but maybe because I'm still a teenager idk) what size should i get, the small is 63cm and the medium it's from 63,5 to 65cm. And btw I'm talking about the amazon GP 5
Get the smallest size then.
Weaponsandstuff93 ok I'll see thanks for the advice
Weaponsandstuff93 Ok 😅 I made a mistake i misured my head wrong in reality my head 65 cm so I'll get medium
what size would you say is best for a 14 year old?
Is the Chinese sizing system is the same as the Soviet's/Russian sizing system?
As far as I can tell yes
where do you buy gas masks
e B a y
Where is a good place to buy one that’s real and comes with mask, bag & filter ( I won’t use the filter it will be just a prop ) thanks @weaponsandstuff93
if I have a head that is 40cm from chin to crown and back what size would you recommend for an s10/fm12?
No idea because the S10 doesn't use those measurements. What size GP-5 do you have?
Weaponsandstuff93 2.
So probably size 2 or 3 S10, size 2 FM12.
2Y(upgraded GP-5)is the size of mine
Y is technically a downgraded GP-5, the Y means thinner rubber, so upgraded in the sense they are cheaper to make.
i got the y1
could you use a gp-5 gas mask in airsoft
Not without reinforcing the lenses first.
@@Weaponsandstuff93 ok thanks
I have a 65 sm head,i bought a gp5 size 2. Is it ok?
Your at the top end of Size 2, so Size 3 may be better.
@@Weaponsandstuff93 thanks,ill buy another one then :)
measured a 6.9- 7 inch size, and I have lots of hair on me. So a size 3 would fit me perfectly
Probably
I didn't know about the sizes so I bought a size 0 gp5 😐
I guess you could put it on a baby.
Hehe i did the same. I asked the shipper and they sent me a L anyway
Hey i have a 27 cm head what gasmask size do i need
For a GP-5 that would be size 3 or 4.
that thumbnail is great
Thanks.
So im 10 and my head size is around 58cm so what size should I get?
Probably size 2
Well sh*t, i have a big head and bought myself a Large size mask.
Now it doesn't fit... welp
What is the chinese sizing chart
It used to be the same as the Soviet and I think it still is, size 1 is small and size 4 is large.
Is the Chinese sizing the same as Soviet sizing?
I think so
My Dräger M65 fits me perfectly...
German jawline ftw!
Same here lmaoo
@@Hadrian9707 I have a large head (61cm circumference) and the M 65 in size 2 (M) fits me very well. The M2000 (replacement of the M65) i have also has size M.
@@Hadrian9707 forehead to back of the head.
In the Bundeswehr nearly everyone gets issued size M and only if your head is very large or very small you get size S or L, so I would recommend going with M to ensure it seals properly.
i am a kid ad when i masured my head it sead 71 cm idk medium or xl
nice russian accent bro, you sound like you speak it fluently.
I certainly don't but thanks.
Hey, how do ya clean a M15 gas mask??
I've got a video on cleaning masks.
Is the s10 sizing the same as the FM12?
Yes but only 3 not 4 sizes
@@Weaponsandstuff93 so size 3 is the smallest?
Great informative vid.......... Just wanted to point out that Celtic is pronounced Keltic not seltic. Seltic is the pronunciation for the Scottish football team only.
It's debatable if you Google it.
Will the gp5 fit an Asian sized head
Probably, China made copies of the ShM series, the brilliance of helmet masks is they basically fit any head if you stretch them over it due to how the rubber works.
Weaponsandstuff93 thanks for the help
Hey buddy!
Really love your videos. they're helpfull and contain a lot of info!
Especially this one really helped me because it seems like I meassured my head wrong...
I first meassured arround the forehead and back which gave me 61cm. So I ordered a GP-5 sized 3
Now I meassuered it chin to the back and I got 71cm...
I can put the size 3 on, but it feels really too tight and my ears are not completely covered. SHould I sent it back and get a Size 4, since this appears to be the biggest one?
The mask will eventually stretch a bit and get more comfortable so up to you, size 4 is slightly larger though.
@@Weaponsandstuff93
Thanks! I will give it some time and wear it a couple of time during the next week.
Another question: I realized that my eyes are really far up in the glasses when looking into a mirror.
Comparing it to your eyes positioning.
Is this normal? Or caused by the size?
Ideally the eyes should sit in the very middle of the lenses, but for a lot of people that's not guaranteed, also with helmet masks, the bottom sits on your chin area, not the throat so make sure you have the mask in the right position.
thanks very much for your help great video🙂👍👍,
Dude you look like Agent 47
I don't have a nice suit though.
Lol
I ordered an m40 Medium for my slightly large head. The description said M/L Fingers crossed😬
Should be fine I imagine, straps can be adjusted
@@Weaponsandstuff93 Can the M40A1 be modded for more nose real estate? Or should the slight nose discomfort/restriction be tolerated. I fit it fine otherwise.
Do you have a grudge against Sid Wilson?
(Just wondering.)
Weaponsandstuff93
Thanks for the feedback. Not many people even care.
The thumbnail has me dead 😂
Size 3 (Russian) fits me perfectly. I just bought another new ShMS, and it was the wrong size again. XD
Complain to the seller.
That might help. :p
@@Weaponsandstuff93 I measured my head and size 3 is the best for me. However when I got my TF-1, it's a size 4. Strangely, it's still kind of small for me.
@@Weaponsandstuff93 I measured my head and size 3 is the best for me. However when I got my TF-1, it's a size 4. Strangely, it's still kind of small for me.
@@Weaponsandstuff93 I measured my head and size 3 is the best for me. However when I got my TF-1, it's a size 4. Strangely, it's still kind of small for me.
If I’m 11 what head size am I a 1 or 2
Measure it and find out on the GP-5 chart
I hate when sellers don't have a choice option
Makes sense, I'm Polish, Russian, French, German and Scottish American, Soviet masks fit well while I find southern European masks and Asian masks fit me worse
Cool video and it has helped me quite a lot
+Lewis Arthur Good to know.
My GP5 is a 3 medium. It fits fine but when I look at any of my pictures, I can see my eyebrows through the lenses (obviously my eyes too)... could this mean my mask is too small or just not positioned on my head properly?
Great video my dude
Cheers
Just started the vid but I've been trying to figure out how I'm supposed to find out what gas mask size I am. I wanted to make a Halloween costume that would need one
Well that's kind of the point of this video.
Informative.
cool gas mask video
+christopher 2000 Thanks