Ники перфектна 5:25 работа браво ! Сменяй по твоя преценка всичко каквото трябва . Аз съм сигурен в теб и ти вярвам , и съм сигурен в теб че ще го направиш перфектно ! Дерзай миличък , само да стане колата . Успех и приятна работа !
This music is so annoying .. if someone want to hear old flywheel damage can’t, and I think new one is not the same , i changed 3 times and finally put original Luk we will see how long will work properly, thanks for your work
Any ideas as to how much a new clutch, supplied and fitted on one of these would be? Google search comes up around £350-£1,400.... hoping the £1,400 Is for the flywheel as well. Nice video too!
It was so much easier when cars were rear wheel drive. You could do a clutch on a Cortina in a couple of hours on a Saturday afternoon - now there's so much dismantling to do even before you get to the job at hand. Nightmare..
Got my flywheel and clutch done yesterday on my Opel insignia and drove out of garage and my timing belt went, garage saying nothing to do with them, is there a link between the two things??
AllHandmade Do I tighten the bolts with compound glue etc eg locktite blue, red etc or is a torque wrench adequate to guarantee the frame won’t come undone.
Not sure if this guy knows what he's doing tbh end float on the dual mass ? Its rotational movement that shows its worn as the springs become worn out or broken so you loose the dampening effect.
Ники перфектна 5:25 работа браво ! Сменяй по твоя преценка всичко каквото трябва . Аз съм сигурен в теб и ти вярвам , и съм сигурен в теб че ще го направиш перфектно ! Дерзай миличък , само да стане колата . Успех и приятна работа !
А кой е Ники?
Not bad work you have done keep it up mate
Good job! Removing the subframe is a pain. Did you change some bearing or is this play normal?
This music is so annoying .. if someone want to hear old flywheel damage can’t, and I think new one is not the same , i changed 3 times and finally put original Luk we will see how long will work properly, thanks for your work
Simply because there is a separate video in my channel where you can hear that sound ;)
Great vid! Thanks :)
Any ideas as to how much a new clutch, supplied and fitted on one of these would be? Google search comes up around £350-£1,400.... hoping the £1,400 Is for the flywheel as well. Nice video too!
It was so much easier when cars were rear wheel drive. You could do a clutch on a Cortina in a couple of hours on a Saturday afternoon - now there's so much dismantling to do even before you get to the job at hand. Nightmare..
Как отсоединить кабеля выбора передач от пластины?
Turn the music off!!! OMFG
This music is annoying.. even can’t hear when he test the flyinwheel ! maybe someone want to hear defective wheel ..
Which torx size has flywheel ?
Steering rack can be left, undo anti roll bolts, torx head... 😊
Got my flywheel and clutch done yesterday on my Opel insignia and drove out of garage and my timing belt went, garage saying nothing to do with them, is there a link between the two things??
No
I've heard it can all be removed from the passenger arch lining? Is it worth removing the whole subframe
i was thinking this too
clutch doesn't look too bad
Do I need the subframe alignment tools? Or is tipex marks etc okay to realign? By the way thanks for sharing.
just use some marker or paint to mark the subframe position before removing it.
AllHandmade Do I tighten the bolts with compound glue etc eg locktite blue, red etc or is a torque wrench adequate to guarantee the frame won’t come undone.
in Haynes manual it says that you need only torque wrench so i did so
@@icku Hi , Can you give me the torque specs of the frame bolts please ? near the radiator , near the wheels and the 3 bolts near the steering rack
Accordig to Haynes -> Subframe mounting bolts: Stage 1 - 90 Nm; Stage 2 - Angle-tighten to 45 degrees; Stage 3 - Angle-tighten to another 15 degrees
Привет колега,
За да се смени уплътнението на коляновия вал трябва ли да се сваля картера и да се точи маслото на двигателя?
Не, сваля се без махане на картера. И без точене на масло.
How come you fitted a different clutch to the old one
Different, but compatible :)
Wow, that oil is really black for transmission oil
Is this the same engine as the fiat 1.9 multijet?
same, only miner differences :)
I need mine doing, do you know how much it’ll cost?
Sorry, no idea. This is home made years ago.
tipo de embrague es de la marca Luk el de serie, la música es de polla!!!!!
Ace sound track who is it?
Music by GayPunk
Soundtrack called - And the gays love this sound all round
Making you a gay!
Not sure if this guy knows what he's doing tbh end float on the dual mass ? Its rotational movement that shows its worn as the springs become worn out or broken so you loose the dampening effect.
U don't say? Take a better look at my channel and then comment ;)
U don't have to remove a steering rack 😂😂
You can do it much easier way buddy
Same as fiat diesel
It is fiat engine
Opel
@@fingerz6983 Vauxhall
@@javaidsadiq5775 no opel look it up
@@fingerz6983 Opel is Vauxhall. Just opel is a renamed version of Vauxhall