Opel Astra J 1.7CDTi - Clutch & DMF Replacement
Вставка
- Опубліковано 26 лис 2019
- #OpelAstraJ #VauxhallAstraJ #ClutchReplacement #DualMassFlywheel #DMF
#AstrajDMF #AstraJClutch #OpelClutch #VauxhallClutch
Support the channel making a donation at www.paypal.me/ClaudeGarage
Please also watch my playlists:
My panel beater work: bit.ly/2xqE8VC
Just mechanical: bit.ly/2XikZEO
My Electrical - Electronics - PC & Car Diagnosis work: bit.ly/2RLwoa8
PDR - Tools & Jobs: bit.ly/2KRjmaD
DIY: bit.ly/326Ye5y
Dash Cam & Traveling: bit.ly/2XGFudI - Авто та транспорт
Et bravo pour la vidéo chapeau ! Tu es un pro !
Hi Claude, great videos. Do you only have to remove the front sub frame bolts, and slacken the rear ones. Going to tackle my astra envoy van 1.7cdti 2004 (80bhp). Thanks mate.
Salut! Bravo pentru video, ai folosit scula speciala pentru montarea ambreajului luk pentru ca este cu autoreglare văd? Mulțumesc.
Big like 3...great video
Did you need a clutch adjuster for the diafragma montage? Or is is Just bolt on with no special tools?
Congratulations excellent video
Thank you.
Good work. Not easy doing a clutch change on your own.
Great video . !! . Could you hear that knock whilst driving along roads too or did you only realise when you took it apart. .. . . ?..
You have my respect Bro!😎
Thanks.
You mounted a SAC pressure plate, did had to pull a pin to release it?
Did had to realine the steering or has the subframe guiding pins?
Good work and greetings
Nice work. Didn't have problems with the Luk clutch? Off after a few days or so?
Respect
bonjour au niveau de la depose du berceau vous procéder comment ?
en tout cas beau boulot !
salve io ho fatto la frizione da circa 1 mese su opel astra 1'7 e a freddo sento la frizione sfregare come u contatto fra metallo il meccanico dice che nn è niente ..a cosa vado incontro?grazie
nice vidio ...like
Is this normal if brand new flywheel for this astra came without balancing weights ?
Good day, my release bearing has burst twice, what do I do?
O întrebare am kitul de ambreaj de la Sachs si rumentul de presiune de la LUK, merg împreună?
Bună seara,la opel astra k 1.6 diesel 110 cp tot asa se da cadrul și cutia jos?
Had liked to see you replace the pressure bearing and put back the full clutch and transmission. Also i liked to see you replace all the nesessary parts in the beginning.
Thanks anyway, you are good 👍👋
Thanks for your appreciation.
Buna.am si eu o problema cu un opel astra j 1.7 cdti 110 cai.
Mi se aprinde servus masina cu cheia.
Testerul mi-a dat tensiune joasa releu bujii.
Tensiune inalta releu bujii
Releul l-am schimbat.
Bujiile le-am verificat a fost în scurt una.
Nu scap de eroare.
Poste ai avut aceeași problema.
Mersi.
Hello pouvez vous me dire le numéro du kit embrayage et de la butée merci d'avance
Ce de quel année le véhicule opel astra et sa version svp
How you remove the Transmission without dissamble the frame
Mine is being done next week. Is the LUK make good quality? What mileage was the engine?
Luk had from factory. Around 120.000 miles (200.000km)
That dmf isnt that bad, I've seen a lot worse, the one I just took of my vauxhall van fell out when I pulled the gearbox back then again it do 200k, the previous van to that I had 6" of free play on either turn, I find the motors that have a rattling dmf is more often than not the pressure plate not balanced right at the factory, when dmf wears and you have a pressure plate in that isn't quite balanced right it's shakes a bit like a wheel that's out of balance.
Going back to the 1983 cavalier yes a GM car, you could change the clutch in 15 minutes, why is it now so work intensive ?
But without flywheel and seal. Clutch pads last much longer these days. Flywheels are the issues now.
Hi, great video 🙂 do you have to disconnect the steering rack to lower the subframe? Thanks
Hi, thanks. Yes i disconected the steering rack for lowering subframe.
you prolly dont care at all but does any of you know of a way to log back into an instagram account??
I somehow forgot my login password. I would love any assistance you can give me!
@Jamal Forest Instablaster :)
@Rhys Ethan I really appreciate your reply. I found the site on google and Im trying it out atm.
Looks like it's gonna take quite some time so I will reply here later when my account password hopefully is recovered.
@Rhys Ethan It worked and I now got access to my account again. I am so happy!
Thank you so much you saved my account !
👍
Would help if you explain what your doing.
Salut. La 10:12 - 10:14 in spatele volantei nu ar mai fi o garnitura inelara de schimbat?
Salut. probabil te referi la simeringul de ulei dinspre volanta. La mine nu era cazul de schimbat desi este bine sa-l schimbi daca tot ai demontat ambreiajul si cutia.
Pe unde se completează ulei La cutie?
Trebuie neapărat chei dinamometrică?
How many kilometers did you have to replace the whole set? great work 😁
Thanks. About 200 k.
Hey just wanted to ask, I have the exact same car and my clutch pedal is really stiff and hard to press in. I have 115.000 km and the transmission was never seviced. Could it be worn out? Thanks!
I would check the Diaphragm , slave and master cylinder. If the clutch is worn the diaphragm goes over centre to take up the worn clutch
bought the exact same car from a dealership and my clutch was really stiff car broke down after 3 days clutch pedan sticking to the floor and wierd noises , took it back and they told me it was the DMF was faulty probly from start stop used all the time but they also changed the clutch car had only 52.000 miles they fixed it free of charge but it costed them nearly 600-700 pounds
clutch still a bit sticky before engangement so im taking it to a garage of my own to double check the work that has been done
what do you guys think it could be ? illl update when i have more info
@@xalastras21 but you never did....update.
@@jgoncalodm a year after lol sorry guys been a crazy year here it is :
Update clutch is working fine same with DMF
Its not sticking etc must been something but is not doing it anymore Car has now 72k miles
Clean mot and recently serviced all looks good
Might change my Timing belt as it manufacturer says 6 years or 100k miles even tho it looks alright
Great video
what you think about Valeo repset on Astra j 1.7 gtc
Don't buy valeo, bad clutch kits.
@@j0p1x44 Which brand to buy than? I have seen many good reviews on Valeo clutch kits
@@mbz4652 my very close friend is a very good mechanic, he said that he installed a few valeo kits and they are just not good, he always recommends sachs or luk
Te Salut , am aceeași mașină.
La mine se aude zgomot doar cand apăs ambreiajul la jumate. În rest prinde bine ambreiajul intra bine in viteze. As schimba doar rulmentul de presiune oare ar fi ok ? nu vreau sa mai investesc mult deoarece vreau sa o vând.
Salut. Daca tot vrei sa o vinzi, ma bine nu o mai desface. Probabil ca daca o desfaci, vei constata uzura mare si la celelalte piese....
Bonjour est-il nécessaire de changer le joint spi de vilebrequin ?
Merci de votre retour
Cordialement
Bonjour. Pas nécessairement.
@@ClaudeTube d'accord ça marche merci beaucoup pour votre retour
Et bravo pour le travail 🙂
superbe video dommage que tu parles pas
Buna seara. Am si eu un astra j scurta diesel 2011. Cit costa tot chitul pe luk ?
Salut. Am dat acum doi ani, in jur de 3000 lei.
i have same problem with my car opel Astra 2011 1,7 cdti Diesel
+1
Salut ce marca este ambreaju ?
Dak volanta este ok nu bate pot sa schimb doar ambreaju si rulmentu
Salut. Este LUK. M-as mira sa fie in regula volanta. Eu tocmai din cauza volantei am schimbat, dar daca totusi este ok, normal ca poti schimba doar placa, disc, rulment.
@@ClaudeTube am dusonla mecanic cand oreamutor nu batea cand tinea ambreaju la jumate nu nu batea se auzea doar un fâsâit si mia zis ca este rulmentu de presiune dak tot umbla acolo pun si ambreaju
Si aproo ce ulei folosesti la motor si cutie a mea este manuala 6 rapoarte
@@ClaudeTube La bumneavoastra cum face cad era dusa volanta
@@ClaudeTube cod motor A17DTR la fel ca dumneavoastra imi puteti spune la ce sa stau mai atent la acest motore cum sal itretin corect
@@ClaudeTube salut kitu acela sa potrivit acuma am este straniu ca acuma are fasâit si fara sa calc ambraju
Mecanicu mia zis ca volanta are joc si kitu este nou si volanta transmite la rulmente este posibil sau este veio greseala de la ei
Why do you have that oil leakage on 1:10?
That was not a leak and that was not oil but transmission fluid. He emptied all the fluid out of the transmission.
That wasn’t oil from transmission. I’m asking the for oil marks on intercooler pipe near the throttle body
@@vladimirbulatovic4845 it is an oil leak from the throttle, just replace the O-ring at the intercoler tube. unfortunately this type has it.
Dog dont like that noisy thrust bearing, lol
how many Hours of work ?
Two days. By myself.
ce cutie de viteze este M32 ?
Da....celebra M32....
Buna seara, am așa o problema: am scos cutia de viteze ( astra j 1.7 110cai 2014) pentru schimbare ambreaj, din greșeală am scos de la cutie partea de unde se schimba vitezele ... și nu o mai pot pune la loc, te rog ajutama!???!!dami un beep și te sun 00393272858049
Cati km avea?
198.000km
Salut ac cumparat si eu acest chit de ambreaj nr kit 624344133 am acelas opel 1.7 81w 110cv A17DTR se potriveste pe volanta care o are masina.va multumesc
Salut. Nu am de unde sa stiu. Eu am schimbat cu un kit complet care a inclus si volanta. Din ce am vazut prin comparatie, desi ambele kituri erau de la acelasi producator, nu ar fi mers montate componente de la una la alta. Chiar am intalnit pe cineva care a cumparat ca tine, doar chitul de ambreiaj fara volanta si nu i-a mers. Poate respectivul a comandat gresit piesele. Spor. Sa-mi spui daca la tine a functionat.
@@ClaudeTube am.stat in dubi si lam returnat 😔😔
Pfffff....grea operatiune de facut singur...... #ClaudeGarage #ClaudeGarage #ClaudeGarage
Not full video
ce e ala dmf?????? am gasit si pe unele forumuri si nimeni nu scrie numele complet, doar prescurtarea.
dual mass flywheel.....in traducere, volanta cu dublu masa
Что такое DMF?
DMF = dual mass flywheel
Non hai fatto vedere di staccare il piantone dello sterzo dalla culla
Non hai fatto vedere tutti i passaggi, quando ti sei accorto che il cambio non riuscivi a toglierlo perché lo spazio non era sufficiente e hai dovuto abbassare la slitta