ours did at least 60 mph when we were kids. I miss racing like 6 kids had one growing up we meet up at a church parking lot and race. I remember out running 2 bicycle cops he was so mad we was doing laps around them untill I seen them call on the walkie we got out of that area fast!!!
I HAVE A QUESTION IF YOU GET A MOTOR USED HOW DO YOU KNOW IF SPRINGS AND VALVES HAVE BEEN REPLACED/UPGRAFED /HOW TO TEST? MY ISSUE IS IT HAS A CARB FLYWHEEL ETC BUT NOT SURE WHATS INSIDE OR EVEN THE DIFFERENCE?
I make stockys go 62mph ( stock cam, piston, rod, cam, flywheel). I only ported/polished and port matched everything, 22lb spring, champion rockers, 28mm pwk carb, side exit straight exhaust. 12/53 gearing #35r gold chain running 15" tire trust, i whooped on built bikes all day
im sure he miss spoke, when he said 60 thousand and 81 thousand RPMs. im sure he means 6 thousand and 8 thousand one hundred. thats just nerves. understandable. just takes practice. keep griding brah.
bro how do yall take off wo popping a wheelie i can adjust the throttle a lil ik that but it rlly doesn’t change that much still wheelies instantly and it’s completely stock other than taking the governer off
Yo bro I am tryin to find a billet flywheel for my colomen 99cc 3.0hp mini bike Where you think I can find that cause I try’d looking on go powersports
Yo what about gearing? I have a doodlebug with 212 predator, air filter, jet, pipe, governor zip tie trick and a catch can but I have a 35 chain with a 10 tooth clutch and a 70 tooth rear sprocket. What's the right ratio to go faster then 33 mph. I'm a heavy fuck now I'm like 230 lbs but real shit I'm trying to learn. Ik on bigger bikes a torque converter helps, should I get one idk any input would help my man I'm not trying to be a pain in the ass
nah im wondering the gearing too, 65mph dont mean anything unless theres a gear ratio calculation alongside it. get yourself a lower tooth count rear sprocket for faster top speed and a higher tooth count rear sprocket for faster acceleration. royaljz running somewhere around 4 to 1 ratio so 10 on clutch and around 40 on rear sprocket you can hear it in the vid all clutch til at least 30mph
How much rake do you have on the front? Do you have a steering stabilizer? I ask for this reason. If you can, change the front to have about 4.5 to 5 degrees of forward rake. This makes it a bit more stable at higher speeds. If you also put a stabilizer on it, similar to Suzuki GSXR or similar race bikes, that will dampen your bumpsteer.
How to make a 65 mph minibike? Apparently i just gotta get a stock motor, remove the gov internaly and get a small sprocket on the back hooked up to a clutch and i hit 65 70 mph with a stock hemi. And 55 60 on a stock 212
That's because most performance cams require heavier than stock springs. As an example, you can't run a 275 cam on stock springs. However, the CL series cams run on stock springs. The CL3 and 4 get to well over 6K RPM on stock springs. Not many guys run them in minibikes because they are stock lift cams.
@@Deucealive75 you know what valve float is right well assuming you do the cure for valve floating is a stronger spring because it will close the valve and stop it from floating valve float is when the valve doesn't close stays open because the spring is not strong enough to pull it back in the short amount of time
I have a question I have a mini bike that I just installed a predator 212 but some people of discord said to install smaller rear sprocket But rn I have a 11 tooth centrifugal clutch and 46t sprocket in rear what do u recommend
Aye bro what’s your number got me a stcok mini bike idk what I did took a part the engine just to lube everything up man that boy is a monster now and is didnt really do nothing really hit me up
Subscribed because I support anyone who shows so much effort. Keep it up!
Man u break it down into detail..ima go step by step in order to improve my motor ..good video Royal JZ💪💪💪💯
Don’t skip the alternator
@@Nate-dx6gg What alternator??? LMFAO!
So billet flywheel, billet rod, and 18 or 22 pound valve springs??? I've already got the mikuni carb and header pipe and I get valve float now.
U need valve springs to stop the valve float. Guessing you've figure that out by now.
@@marshallk23 yeah unfortunately all that is in hold for a while
You remind me of me back in my youthful days, I am impressed!
Just fixed my mini bike after 2 years I’m from Michigan I’m fw your videos bro😊
Brooo the intro go crazy 🔥🔥
You've got a runner for sure! Awesome work.
Yo so my p 212 has the governor removed but when I hit like 35 it like rattles and won’t go faster is that valve float
That's the alternator
Sure..
@@bevlovestray6754 ajajajjaaj dont be silly lmao it might be your oxygen sensor 👍🏼
ours did at least 60 mph when we were kids. I miss racing like 6 kids had one growing up we meet up at a church parking lot and race. I remember out running 2 bicycle cops he was so mad we was doing laps around them untill I seen them call on the walkie we got out of that area fast!!!
It was faster because you weighed like 80lbs back then
What’s your build right now ? Everything upgraded or you still rockin stock push rods and rockers
Lol‼️good intro bro 😎👍🏽keep them coming
What up bro can you let me know what kind of clutch you were using. I have a ghost 212 and im trying to use the same setup. Great content btw
Jus a flywheel stock motor everything no springs ?
Not gon lie that intro would been fire if it went on longer but good stuff 🙏🏽💯
I HAVE A QUESTION IF YOU GET A MOTOR USED HOW DO YOU KNOW IF SPRINGS AND VALVES HAVE BEEN REPLACED/UPGRAFED /HOW TO TEST? MY ISSUE IS IT HAS A CARB FLYWHEEL ETC BUT NOT SURE WHATS INSIDE OR EVEN THE DIFFERENCE?
I make stockys go 62mph ( stock cam, piston, rod, cam, flywheel). I only ported/polished and port matched everything, 22lb spring, champion rockers, 28mm pwk carb, side exit straight exhaust. 12/53 gearing #35r gold chain running 15" tire trust, i whooped on built bikes all day
That that intro fire 🔥
Can you upgrade just the cam without upgrading the flywheel or rod ?
No
That intro tho 😂❤
Love the intro 😂🔥
Awesome little bike crew you got there.
Would you go as fast on a go kart?
Great job bro!👍
What do want for the Joe's mini bike frame?
Sprocket to clutch ratio, straight chain, governor removal, 22 mikuni, header pipe, and timing 🔑 almost 70mph no 🧢 no fluff.
Easy mods
What’s a good sprocket to clutch ratio
??
60 tooth back sprocket and standard 15 or stock clutch all gas sir
Where I buy the timing key pls give link
Fax its all the ratio, if you wanna go crazy fast get a lower ratio
@ 1:45 when you're talking about the Cam hitting higher rpm is that WITHOUT the governor? And What is the highest RPM a stock cam can hit ungoverned?
I'd say 7-7800 depending on springs
@@samhilger5761 18lb? What RPM for those?
Even with stock cam ungoverned n stock springs you're get valve float ,18lb valve springs like $11
@@larryfisher That's not what I asked LARRY... -_- I HAVE 18lb valve springs.
I have a new 212 can you build it up for me? i'm in the 818
Do you have a geniune or an amazon carb?
for a hot 265 can is my cast aluminum flywheel good enough or do i need to buy a billet flywheel?
Cast flywheel but add a timing key
@@RoyalJZ can i use the timing key that came with the flywheel?
81.000 RPM’s Dang💪🏼🤣😂🥲😂😅🤣😂 this kid………
Same thing I said not 8100 but 81000
Yeah that was funny as hell 😂
Appreciate the breakdowns chanp
im sure he miss spoke, when he said 60 thousand and 81 thousand RPMs. im sure he means 6 thousand and 8 thousand one hundred. thats just nerves. understandable. just takes practice. keep griding brah.
My man got a idling jet engine
Damm bro 81,000 rpm??? Call the Guinness Book!!
Awesome intro!!
Bro love the bike🔥🔥
bro how do yall take off wo popping a wheelie i can adjust the throttle a lil ik that but it rlly doesn’t change that much still wheelies instantly and it’s completely stock other than taking the governer off
Lean forward put all your weight towards the front
Ur frame prolly small but u gotta lean forward
your great at explaining everything
I'm getting a pwk carb and a custom exhasut I'm definitely blowing my engine
Can I add a billet fly wheel to a stock motor for higher Rpm’s or am I gonna ruin the piston ??
If the engine is stock a upgraded flywheel won’t do anything, might even slow the bike down.
A billet flywheel would def come apart at 60k rpm
What would you recommend instead
@@ttvgifted3171I usually do a full flywheel delete so that removes a weak point
@@draxstice thanks man I’m new into mini bikes and didn’t know that was an option lmao
@@draxsticehow do you even do that I’ve been trying too look up videos about it but I can’t find anything
Yo bro I am tryin to find a billet flywheel for my colomen 99cc 3.0hp mini bike Where you think I can find that cause I try’d looking on go powersports
Thx for letting us know ❤
Yo what about gearing? I have a doodlebug with 212 predator, air filter, jet, pipe, governor zip tie trick and a catch can but I have a 35 chain with a 10 tooth clutch and a 70 tooth rear sprocket. What's the right ratio to go faster then 33 mph. I'm a heavy fuck now I'm like 230 lbs but real shit I'm trying to learn. Ik on bigger bikes a torque converter helps, should I get one idk any input would help my man I'm not trying to be a pain in the ass
nah im wondering the gearing too, 65mph dont mean anything unless theres a gear ratio calculation alongside it. get yourself a lower tooth count rear sprocket for faster top speed and a higher tooth count rear sprocket for faster acceleration. royaljz running somewhere around 4 to 1 ratio so 10 on clutch and around 40 on rear sprocket you can hear it in the vid all clutch til at least 30mph
Great video boss
What is the difference in cam lobing and all that?
And don’t say they are different sizes… Ik
I have a joe bike. I can't go faster than 30mph because it stats wobbling. I can't figure out why.
How much rake do you have on the front?
Do you have a steering stabilizer?
I ask for this reason.
If you can, change the front to have about 4.5 to 5 degrees of forward rake.
This makes it a bit more stable at higher speeds.
If you also put a stabilizer on it, similar to Suzuki GSXR or similar race bikes, that will dampen your bumpsteer.
It's Joe's frames they SUCK they all do the same shit!!!
What kind of valve springs are you running?
Look it up😂
Intro was perfect lmaoo
My 212 predator pulley is locked it took
It off and the thing in the inside won’t spin at all How do I get it to work?
shoelace
How to make a 65 mph minibike? Apparently i just gotta get a stock motor, remove the gov internaly and get a small sprocket on the back hooked up to a clutch and i hit 65 70 mph with a stock hemi. And 55 60 on a stock 212
what is the gear ratio
What is the name of the shop you recommended getting parts at in LA?
Voltminibikes
My I ask what the valves was set to after all that
Where in the store at in LA ??
aye lol that intro funny video hard tho
Stock ct100u with a stock 212 went 48 with a 12 Tooth clutch
I didn't know Val float could be solved by cams you know normally that's solved by stiffer valve springs
That's because most performance cams require heavier than stock springs. As an example, you can't run a 275 cam on stock springs. However, the CL series cams run on stock springs. The CL3 and 4 get to well over 6K RPM on stock springs. Not many guys run them in minibikes because they are stock lift cams.
@@Deucealive75 you know what valve float is right well assuming you do the cure for valve floating is a stronger spring because it will close the valve and stop it from floating valve float is when the valve doesn't close stays open because the spring is not strong enough to pull it back in the short amount of time
@@brandonwood7132 Yes. I know very well what valve float is.
I’m getting 26lbs spring I had a mini bike that went 60 and it ran like a champ
Thats not what he was saying... he said the cam caused the valve flot and it is fixed by getting stiffer springs
black mamba jr cam baby
Can you give me the link to that pipe
What lbs springs do u use
26
How much for whole build?
Little buddy I haven’t seen you in a while. How come you stop making videos. You my favorite make some more.
I got 60mph on predator 224 60mph just with Amazon 26mm mukuni cline that was under $30.00
My 212 hemi does 51 mph stock with only a cold air filter
Yes sir 👊🏾
The opening was awesome.
Im literally trying to make my 212 this fast
81,000 rpm ?!?! Holy shhhhhhh
Add a baby turbo thats what im tryna do to my big block
81,000 rpms???
65mph dont mean anything unless theres a gear ratio calculation alongside it.. sounds like youre at around 4 to 1 ratio
That's what i was about to say
85k rpm is impressive cant believe hes only going 65
Subaru ex21 parts link
8,100 rmp not 81k
This why i ask mfs when i buy a bike if yo gov off you got flywheel springs and rod? They be silent asf
How do you know if your engine is a hemi or not
The valve covers are different
What cam do you have in this video
how many mm is the carburettor?
22
Seems like you need more teeth on the clutch and some less on the rear
I have a question I have a mini bike that I just installed a predator 212 but some people of discord said to install smaller rear sprocket
But rn I have a 11 tooth centrifugal clutch and 46t sprocket in rear what do u recommend
How much you weight
@@RoyalJZ 150lbs
@@Mylotheblacknwhitecat do 12 teeth and 54
And what is your goal?
@@RoyalJZ if I make the sprocket size bigger won't it make it not fast 😂 should I go with smaller rear sprocket
bruh u know ur bike audio only works on left ear on here on all ur vids
Yeah on my old videos but I fix it now
81 thousand rpm must be running a turbine motor
"60 thousand rpms" ain't no rod or fly wheel in the minibike relm 😁
bros adding an extra 0 to his rpms
I can't read
"Mikuni 22McMillimeter"
One percent almost got hit lol
I need help who trynn lock gotta go cart
Well u talked alot but never showed how to build the engine?
“How to Make a 65mph motor” Not how to build a 65mph 🤦🏽♂️
@@RoyalJZ got me there, would love to see one of these scooters rip in person
8100 rpm.
y’all need helmets
81000 rpm he running 🤣
Nowhere near 65mph i atmost 45
At least^
Buy a 420cc predator
670cc predator vtwin
Jesus...
First
Your gearing is gay
Aye bro what’s your number got me a stcok mini bike idk what I did took a part the engine just to lube everything up man that boy is a monster now and is didnt really do nothing really hit me up
Rip lmao
Bro u got social?