The way you explained the piston deck height pretty dope. I know a machine shop should be able to shave it down even no problem probably for like 50-80$ if you take it ready and not all oiled up.
What up brother, found your channel after wanting to make my own minibike... homemade frame with a stage 2 predator 212, thanks for the help! Definitely subscribed, keep up the good work man!
Finnally someone shows this rod on a video! I was so curious but since im in my first build i didnt want to spend my money on bad parts. It will save me alot of money cuz i live in belgium and only shipping costs 90 usd from gps
bro wtf im also from belgium im making a skelter kart into a go kart and at the moment my predator clone it was from amazon so not a real predator but put a cast alumium fly wheel on and a slide style carb but i realy should get a better rod cuz the stock 1 is probably gona explode prety soon so but idk if its worth paying 70 to 80 euro's for a sheap amazon rod that might not last long . or if i schould buy a stupid expensive shipping fee for a us billit rod that won't explode
@ayjzertgamer4594 i just saved money for mine i got a genuine billet flywheel and rod, if u order them seperatly from omb, then flywheel is 160 euro and rod is about 130 euro. If u want u can buy my engine lmao. Im thinking of keeping it tho and building a stroker either 224 or 236 tillotson idk yet
Back in the days bro when I was like 15 I had a 11hp big block on a small ass go cart. Mf came with a powersport 3.5 or something like that my neighbor had a "broken" pressure washer he was like you can have the motor if you take off. Took it off and noticed the oil sensor on it. So changed the oil and boom started on the ground lol. So we was on like a mf. Honda 11hp was dope. Shit went like 75 ish on with stock gearing. And it was a 1 wheel peel lmao. Love seeing your vids, takes me back. Makes me wanna build something again 😂
At the end of the vid you talked about the carb bro. Have you tried out the Nibbi racing carbs? Put one on my ssr 125 and man bro pulled way better then the stock unit. Was easier to get the jets dialed in too. Worth a shot
Been watching your content for a while now and I have to say you really holding it down for us in the West Coast. I can relate to you a lot cause you have a passion for minibikes. I’m just starting to get into this hobby,but I do race Hondas and I see that you have a taste for that as well 😂❤💯💪 SHOUTS OUT FROM TULARE,CA,93274!!!
I got this same rod, did you use the screws they came with? Asking because when I use my 12 point 1/4 socket, when it comes to torque the screws my socket keeps spinning and won't torque the screws. I was lucky they didn't completely strip. Thanks
Ngl yeah I was jus thinkin bout gettin Chinese parts cuz I’m on a budget buh I didn’t trust them at all buh watching u do it tells me everything I need to know and it seem like these parts are really good actually 💯💯
What do you recommend me to get for my stock 212cc. Part from Amazon am from. South Los Angeles CA and love seeing your show bro I. Gonna swap. A3.5 to a 212cc predator
Have you been successful with running the cast aluminum flywheels with a 4° key? I just got one on cyber Monday from Amazon for a budget build. I seen EC carburetors has one on there website but there claiming its 18° timing and recommend a 12° key. I bought a 12° key from OMB and a Super X CM cam but don't have a degree wheel to check it.
@@Adrian-ig6rj well yes that sounds normal because these flywheels come with 18 degrees of timing. If you have an aftermarket cam it’s going to run bad. Are you running a cam or is it stock?
Nice video.can you run stock valves and stock valve keepers with 26 lb springs? Yo man at least carry a rope and recoil handle in your pocket.lol. I’ve done the walk before too.lol.
@@RoyalJZhey Mann u saying it was for a hemi flywheel if I'm not mistaken right , all of them say non hemi on the flywheels I anit been able to find a hemi flywheel for the longest no lesser than 80 to 100 , where u getting a hemi 10k flywheel at that price , also what site u use to get a spocket hub for a 5"spilt rim with 12mm bearings I got this old vintage mini I want to hotrod up bro.
@@Deucealive75 yeah I swore he said for hemi in the video I haven't saw non either , do u know where they get them big fat wide rims like a 5 or 6" rim atleast 4 1/2 wide I got alot of racing go kart tires I like to run I go there rims but can't find a hub to connect onto there a racing go cart rim
Hey RoyalJZ I just bought a pwk24mm “racing” carb for my Coleman ct200u, when I installed it to the mini bike and tried to turn it on the carb would get flooded with gasoline, so bad that it won’t start because of how much fuel the carb was choking on, fuel would start coming out the side where the air filters is adapted. And I opened it up to check the jets and it was installed with the smallest ones so there was no problem there, then I tried idling it but nothing. You got any tips?
I did yesterday lolol. I put mikuni carb header removed oil sensor and gov completely racing plug and I broke the rod lastnight lolol ordering all stage 2 now
The ebay flywheel looked better tho beings it was billet the other one looks like cast aluminum. Kind of like how transmissions are made of. Not quite billet but still dope nonetheless
Yo, what are the parts I need for a hemi budget build? I'm defiantly not spending $300 when I'm cool with 40mph. Can parts interchange? Anyone please help. I'm running gov bypass with vm22
Just bought a Colman c200 off fb, they swapped it with a predator 212 engine non hemi. I ziptied the governer, redid the exhaust and has air filter removed. For being such a beefy mini bike it goes up to like 45 mph!
NIce Job JZ , im a certified Aircraft Mechanic , and youre doing a great job teaching people in the real world!...I came from your town ..
Ive done this build bro you def know what you talkin about mine hitting 60/65 top speed
aye what sprocket size should i get cause i’m running 40 chain and i can only get a 10t clutch. do i have to move to 35 chain to get 60mph?
@@SIXvwi have a 10t clutch too and 35 sprocket i’m hitting 55 top speed but i’ve done 60 before i think i just need a new carb
@@SIXvwdon’t switch to 35 chain
yall got a strait chain right
I’ve done this build 😂😂😂😂
The way you explained the piston deck height pretty dope. I know a machine shop should be able to shave it down even no problem probably for like 50-80$ if you take it ready and not all oiled up.
What up brother, found your channel after wanting to make my own minibike... homemade frame with a stage 2 predator 212, thanks for the help! Definitely subscribed, keep up the good work man!
Finnally someone shows this rod on a video! I was so curious but since im in my first build i didnt want to spend my money on bad parts. It will save me alot of money cuz i live in belgium and only shipping costs 90 usd from gps
bro wtf im also from belgium im making a skelter kart into a go kart and at the moment my predator clone it was from amazon so not a real predator but put a cast alumium fly wheel on and a slide style carb but i realy should get a better rod cuz the stock 1 is probably gona explode prety soon so but idk if its worth paying 70 to 80 euro's for a sheap amazon rod that might not last long . or if i schould buy a stupid expensive shipping fee for a us billit rod that won't explode
@ayjzertgamer4594 i just saved money for mine i got a genuine billet flywheel and rod, if u order them seperatly from omb, then flywheel is 160 euro and rod is about 130 euro. If u want u can buy my engine lmao. Im thinking of keeping it tho and building a stroker either 224 or 236 tillotson idk yet
cmon bro upload i’ve came back to this vid like 4 times waiting for a new one 😂
Ong 😂
Back in the days bro when I was like 15 I had a 11hp big block on a small ass go cart. Mf came with a powersport 3.5 or something like that my neighbor had a "broken" pressure washer he was like you can have the motor if you take off. Took it off and noticed the oil sensor on it. So changed the oil and boom started on the ground lol. So we was on like a mf. Honda 11hp was dope. Shit went like 75 ish on with stock gearing. And it was a 1 wheel peel lmao. Love seeing your vids, takes me back. Makes me wanna build something again 😂
Hell yeah let’s goooo new videos !!!
Thanks for showing us the side by side comparison on the connecting rods. I didn't know they were available individually
this really helps man im def putting this on my next build
Great video, I would like to see you push those cheap parts to their limits minus the fly wheel because we have to keep it safe now lol
At the end of the vid you talked about the carb bro. Have you tried out the Nibbi racing carbs? Put one on my ssr 125 and man bro pulled way better then the stock unit. Was easier to get the jets dialed in too. Worth a shot
You Know Its A Good Day When @RoyalJZ Post!
Good shit brother keep up the good work
I have the exact setup but with a hot 265 cam. What jets and where is the screw at lol i cant ever get mine running right
Does anyone have a link for aluminum flywheel for hemi predator can’t find 1 anywhere
Isn't the timing on the aluminum flywheels ~18* advance?
Hell yea I was just wanting this video hell yea
take it apart and clean holes with a strand of wire the spray with brake or starting fluid wtv u got
Been watching your content for a while now and I have to say you really holding it down for us in the West Coast. I can relate to you a lot cause you have a passion for minibikes. I’m just starting to get into this hobby,but I do race Hondas and I see that you have a taste for that as well
😂❤💯💪
SHOUTS OUT FROM TULARE,CA,93274!!!
Ebay/amazon stage 1 kit $50
Valve springs $8
Rod ?
Polish ports ~free
Deck shave or head shave~fre
Offset key to advance flywheel
Remove jackshaft to straight chain
Around 100 bucks total!
I got this same rod, did you use the screws they came with? Asking because when I use my 12 point 1/4 socket, when it comes to torque the screws my socket keeps spinning and won't torque the screws. I was lucky they didn't completely strip. Thanks
Good job 👏🏽
Big thumbs up on this one. Thanks
Bro you need to start putting links that be lit
Try some stamped 1.3 rockers.
If it say it need to Confirm what does that mean for the parts off amazon My springs came yesterday
Ngl yeah I was jus thinkin bout gettin Chinese parts cuz I’m on a budget buh I didn’t trust them at all buh watching u do it tells me everything I need to know and it seem like these parts are really good actually 💯💯
What do you recommend me to get for my stock 212cc. Part from Amazon am from. South Los Angeles CA and love seeing your show bro I. Gonna swap. A3.5 to a 212cc predator
Have you been successful with running the cast aluminum flywheels with a 4° key? I just got one on cyber Monday from Amazon for a budget build. I seen EC carburetors has one on there website but there claiming its 18° timing and recommend a 12° key. I bought a 12° key from OMB and a Super X CM cam but don't have a degree wheel to check it.
The cast aluminum flywheels come with 18 so that puts you at 30 which is fine. You don’t really need a degree wheel. You can just install it
I got the same flywheel and put it on my engine and it ran terrible, it’s out of timing. Not sure why
@@Adrian-ig6rj well yes that sounds normal because these flywheels come with 18 degrees of timing. If you have an aftermarket cam it’s going to run bad. Are you running a cam or is it stock?
@@anthonyh.1512 it it the stock one that comes on the 212 ghost
@@anthonyh.1512 I got a stock 224 and put the cast aluminum flywheel and it was misfiring hard af. should I get the 12 degree timing key?
Ayo Royal, it's been bout 3 weeks or so what's the update on the bike? How's those parts working out? Any issues?
Do you have a video showing how to upgrade springs ??
Can you use your original push rods when you put in a bigger cam? Great channel!
Nah they’re too weak. Get some Chromolys.
How do I know if my motor hemi or non hemi
What measuring thing are u using to measure how much oil cleared up got
I have the predator 224cc on my Motovox right now. Would 26 lbs springs still be ideal or how do I decide that?
Will that rod work with a 224cc or only 212
Are the cheaper flywheels worth it I really don't have 120 to spend on a gps one I have a 212 hemi predator what would you recommend man?
Nice video.can you run stock valves and stock valve keepers with 26 lb springs? Yo man at least carry a rope and recoil handle in your pocket.lol. I’ve done the walk before too.lol.
Yes, you can run stock valve keeper
@@RoyalJZhey Mann u saying it was for a hemi flywheel if I'm not mistaken right , all of them say non hemi on the flywheels I anit been able to find a hemi flywheel for the longest no lesser than 80 to 100 , where u getting a hemi 10k flywheel at that price , also what site u use to get a spocket hub for a 5"spilt rim with 12mm bearings I got this old vintage mini I want to hotrod up bro.
@@jasonpeeler6796 I've never seen one of those cast aluminum flywheels for a hemi. They are all for a clone taper.
@@Deucealive75 yeah I swore he said for hemi in the video I haven't saw non either , do u know where they get them big fat wide rims like a 5 or 6" rim atleast 4 1/2 wide I got alot of racing go kart tires I like to run I go there rims but can't find a hub to connect onto there a racing go cart rim
@@jasonpeeler6796 I do not know where they get the rims.
Hey RoyalJZ I just bought a pwk24mm “racing” carb for my Coleman ct200u, when I installed it to the mini bike and tried to turn it on the carb would get flooded with gasoline, so bad that it won’t start because of how much fuel the carb was choking on, fuel would start coming out the side where the air filters is adapted. And I opened it up to check the jets and it was installed with the smallest ones so there was no problem there, then I tried idling it but nothing. You got any tips?
Sounds like you got a vacuum leak make sure all the gaskets for the intake are good and everything is tight
Have ever blown up any 212 predator stock or wit mods
I did yesterday lolol. I put mikuni carb header removed oil sensor and gov completely racing plug and I broke the rod lastnight lolol ordering all stage 2 now
Mine hitting 66 with just carb, pipe and governor delete
It will explode
Yeah yo shi going to explode groove
@@AlShams69why?
All about the gear
prob jus needs taking apart and clean carb
Wats the best cam i can run on my motor has flywheel rod molly rods champion rockers 26mm carb pipe 26 pound springs
Hot 265 fire265 or 275 cam
What torque wrench u used??
Mine goes 45mph with gov delete and a pipe. If I add a carb would it go faster?
i would add a makuni 22 mines just has the carb and its running 50mph with gov still on and has pipe
Carburetor and springs
carb is easily the best upgrade for the least work. i put a nibbi pe 24mm on my wildcat and gained 10 mph at least
@believerofchrist2481 120 jet 38 pilot and running 10 clutch rear 40
What size did you use for the bolt
🔥🔥🔥🔥
You dont have a starter bike for sale ??
These parts work in a 224 predator?
Still goin??? How’s it holding up
The ebay flywheel looked better tho beings it was billet the other one looks like cast aluminum. Kind of like how transmissions are made of. Not quite billet but still dope nonetheless
i have a hemi 212 predator will a non hemi flywheel work bc the hemi flywheels cost way more
No read the description if it say only non hemi it won’t fit a hemi
Do I have to use valve lapping for the flywheel?
Yes
Yo, what are the parts I need for a hemi budget build? I'm defiantly not spending $300 when I'm cool with 40mph. Can parts interchange? Anyone please help. I'm running gov bypass with vm22
For safety and long-term life get rod and flywheel. Ton more power will come with a cam
Is everything the same for a hemi 212
What is your Valve lash for the engine?
Look up predator 212 valve lash specs
Change your smoke detector battery!
Well this fit on a Honda 200cc gx yes or. No
Yeah
@royaljz what chain size do you run
40 chainn
Anyone know how much torque it needs
So I can use a #4 timing key with this flywheel?
Yes
@@RoyalJZ thanks, trying to finish this build today
4 degrees? No you need a 10 degree key minimum. The $30 flywheels come with around 18 degrees of timing.
How much dirt bikes does this guy even got?
Just bought a Colman c200 off fb, they swapped it with a predator 212 engine non hemi. I ziptied the governer, redid the exhaust and has air filter removed. For being such a beefy mini bike it goes up to like 45 mph!
Why is the ARC rod junk i thought they are good alot of b people use them
I’m pretty sure he was joking
Do u sale build motor
Link for timing key plz
Studs racing sells them or just shave ur key
😂😂😂 Buck Potter UA-cam channel we can show you some tricks homie😅😅😅
Your missing a air filter
DID IT BLOW??
Yes
I’m knew to the mini bike scene js was wondering some things I need to know about them, Honestly completely clueless.
I love your videos but b real if parts suck lmao he said the carb boof😂
Yo JZ is OMD warehouse legit??
Yeah
I have no idea what I just watched
The rods are now up to 66 bucks so the budget doesnt work
What do you mean only 100$ I don't have that privilege
upload more
Links under description would’ve been a little easier.
Yeah bro not linking anything
Genius at work here people... Runs from cops.. posts it online for all to see with other vids clearly showing his face. Stupidity at its finest.
Aye hook me up maneeee