Installing Iron Rock A Arm on Jeep Wj Grand Cherokee | Najar Offroad
Вставка
- Опубліковано 27 сер 2024
- Today We are installing Iron Rock A Arm on my Jeep Grand Cherokee. Total took about an hour with the hardest part being taking off the old control arm. Super Easy install I believe anyone can do unless your jeep is Rusted out. Goodluck haha.
👇!GET YOUR JEEP MERCH!👇
bit.ly/2v8NpUH
Instagram:
bit.ly/2HgwTDS
bit.ly/2Hh075z
👇 *EQUIPMENT I USED FOR MY VIDEOS* 👇
Camera - amzn.to/2rrAStj
Lens - amzn.to/2X5vxUy
Stabilizer - amzn.to/2vY4Sze
Tripod - amzn.to/2p5K2ep
Microphone - amzn.to/2Q6kJEe
Drone - amzn.to/2Nx3JFf
Business Email - YTNajar@gmail.com
As an Amazon Associate I earn from qualifying purchases. Products in the provided Amazon links are my recommendations based on honest use and experience with them.
That ball joint movent is for drifting. Should actually be alot looser if you want max rush ability.
Detroit mi here❤
So glad you posted this. Mine is going bad now
Do it! Worth it! 😜
21mm ratchet wrench works great for taking out those bolts
Just make sure it's reversible.
I broke my rear ball joint last night! I'm going to do the same on my Jeep!
I guess it was meant to be 😜
You should do a gas tank lift
Do you? Thx
22nd street, Phoenix? Lived there in the 80's.
No I’m in California on the 10 freeway
To help with a rusty bolt or nut, use PB Blaster spray. Works a hell of a lot quicker than WD40.
My bolts aren’t rusty but they have a bunch of dirt inside the threads so it’s crunchy all the way out 😂
The three ball joint bolts are tight from factory Loctite. Remember to blue loctite when reassembling
You can drop the rear axle enough to take the ball joint nut off first allowing you to use an impact or socket wrench on the 3 y link nuts
Good to know the ballpoint one is sometimes a pain to remove to though I’m glad I don’t have to deal with that anymore 😂
I spent 4 hours getting that damn A arm out gotta love Wisconsin rust
That sucks😂 I would hate to work on a jeep like that
Thank you for this video im just about to put the a arm in my wj. I live in Australia so it cost me $800 to get the thing over here so I'm really looking forward to putting it in.
Man that’s insane! You’re going to love it!
now you need to get long arms now for it.
Haha that’s what black Friday is for 😜
@@NajarOffroad iam whit you on the black Friday sale for sure .
So you didnt have to put it on stands? Nice, im hopping, just diff so it wont drop.?
Always remember if you have a “fastenall” in the area,you can get any bolt or fasteners there.
Or a ferreteria if in Tijuana 😅
“That bike is worth more than my Jeep” So true😂
Haha I’m not wrong 😂
you prolly dont care but if you're stoned like me atm you can watch pretty much all the latest series on instaflixxer. Been binge watching with my gf during the lockdown :)
@Clark Immanuel Yup, have been using InstaFlixxer for since november myself :)
@Clark Immanuel yea, have been watching on InstaFlixxer for since november myself =)
Dudeeeee no what are you installing brotha???? I can't keep up with you man!!! Bad ass though you rock I copy all your upgrades!!!!
Thanks brotha! Not sure yet! I’ll take suggestions on what you guys want to see me install !
Just ordered this from Iron Rock. I hope I can get it installed pain free 😂. My WJ is actually the exact same color as yours lol. I just rebuilt the front end basically. Adjustable track bar, steering damper, tie rods, drag link, sway bar end links... got shocks coming tomorrow. Just need to get adjustable control arms for the front after I do the rear a arm. I hope I can get rid of this sway 🙏.
Nice you won’t regret it!
Just put together the flex ends on this. Tomorrow I'm solo pulling rear a arm and installing this and front lower adjustable control arms. Wish me luck lol.
For one of your videos you should do a walk around of your Jeep, and show us what all you have on your Jeep! I would love to get some inspiration from yours! Yours is awesome!
Do you have a CB for yours? Where did you put the intena for it? Why did you decide to put it there?
I installed a Long arm and 4.5 inch lift kit all with double cardan and everything expext the rear a arm what is the difference that gives this from the original one thank you
The flex Joint in the rear helps a lot with articulation
What did you set your pinion angle to? Installing mine this weekend but nobody says what angle to set it to
Just ordered the A-Arm from IRO but with my 4" BDS lift kit, it came with a spacer for the OEM A-arm. Do I need to keep the spacer when adding the IRO A-Arm?
That factory one sucks to get off.
The iron rock one is heavy and hard to do by yourself.
What would work best to reduce sway? This triangle or the 4 link long arm kit
I don’t have experience with the rear long arms so I’m not sure there but changed out the rear if you have worn bushing would definitely help with sway
Getting ready to do this soon do you still like it? I know that road. Doing a rusty 2.5" lift. Right our WJ getting a new motor.
Oh definitely helped with handling! Since it’s all new bushings
Great video man!! I’m trying to decide whether to go with this Iron rock kit, or the rusty’s kit. Any thoughts on the two?
I don’t have experience with rustys long arms but the benefit of Iron rock is that it is Bolt on! So I don’t have much welding experience which is why I went iro
@@NajarOffroad sweet, yeah Rustys has almost the exact same kit as this that is a bolt on rear upper but it’s almost $250 more. Sounds like you had great success and I’m looking for something easy and that has Heim joints and this should work!
What rims and tire size do you have ? Also do you have a suspension lift at all? Love the vids !
why not just reuse the old axel mount bolts
Didn’t think of that
@@NajarOffroad was just thinking they should be the right strength
So you know you put that nut on the y link in the wrong spot goes on the front
Yes I do know it’s backwards that was how I bought it and I will be fixing that when I install my trailforged lower control arms 😜
The a arm does not have brake line spots to bolt up like the stock one?
No. Weld the lines to the structure, naa , just kidding
GR8 video 😎 bro
Do you have any plans for your engine?
Do I need a spacer if I have the exact same a arm as the one u installed?
No you do not need a spacer. You only need the adapter plate for the kit
So how did you properly adjust it?
I didnt😂 so the previous owner had it on 4 inches of lift and I’m about 3.5 so I sent it. No vibrations. I’ll get the tool to properly adjust it when I get adjustable lowers
There you go plugging the instagram I see you 😂😂
Bet you won’t meet any girls in Vegas 🤣
Nope cause I’m not in Vegas 😂