Brother ScanNCut - Cutting the Inside & Outside of Stamped Images - Seaside Shore
Вставка
- Опубліковано 18 лют 2018
- In this tutorial, I demonstrate how to cut out the inside and outside of stamped images using the Brother Scan N’ Cut. For this tutorial, I used the Seaside Shore stamp set by Stampin' Up. I stamped the anchors in Dapper Denim ink onto Whisper White card stock. I used a blade depth of 5. First, I used the Scan to Cut Data feature and saved the inside and outside of the anchor. Then, without removing the mat, I retrieved the save data. I then I cut out the stamped images and the holes in the top of the anchor were cut out. Now I can use them for tags. Please check out my blog for lots of other crafty inspiration. thepaperedchef.com
Visit my store to purchase the Crafting Forever stamp set or other great products by Stampin' Up. Use the Host Code on the home page for a special treat from me!
paperedchef.stampinup.net
If you are watching this video and you still don't have a Brother Scan N Cut, then please visit my affiliate link to purchase one. It will make your projects come alive in ways you never thought possible. amzn.to/2ED5PAt
Great tutorial. I bought this machine to cut out my stamps so I don't need to buy dies. Your tutorial makes it so easy to cut out insides. Thank you.
Thank you so much for showing how to cut out the center. All your classes are awesome and are helping me get the best from my brother scan and cut. Florence
You are very welcome. Seems like each tutorial leads to more challenges and questions. Right after this, I cut out scissors from the Crafting Forever set. I added an outline on the outside and then cut out the inside. Then, someone asked if there was a way to cut an outline around the inside. I said there isn't an easy way that I know of. Here we go. I will try to figure it out. ua-cam.com/video/dznTCPdQpDI/v-deo.html
Love your directions... So simple.... Thank you so much❤️
Thanks for watching Becca. Later that same day, I posted another video which is a little more advanced. That time, I added an outline around the outside. Here is the link. ua-cam.com/video/dznTCPdQpDI/v-deo.html
brilliant tutorial - no waffle - easy to understand - thank you.
Zena Smart Thanks for watching Zena! Glad you found it useful.
Thank you so much for doing these! I so appreciate it
Thanks for your support Terese. I will keep these coming.
Thank you so much for your tutorials Learning so much thank you
Thanks for watching Liz. Be sure to see the more advanced version of this tutorial. ua-cam.com/video/dznTCPdQpDI/v-deo.html
Thanks so much. Can't wait to see the Color Me Happy tutorial. Just let me say I think you are the greatest. Love all your tutorials.
Thanks so much. I made two videos last week and never made it to the third but it is high up on my project list so if you subscribed, you will be updated as the new videos appear.
Awesome and Outstanding tutorial!! You are a Great Teacher. I do enjoy and love using this cutting technique but still enjoyed watching your video because always great to get some additional tips & tricks!! YOU so ROCK!!
Joan Smith
Joan. you made my day and you get a Like and a Heart! I’m glad you appreciate my hard work and planning that goes into each of my tutorials. Thanks for watching and for commenting.
Thank you sooooooo much! I have a new machine and I’ve been trying to figure out this detail.
You are very welcome. Be sure to check out the video I made earlier today. It's not as advanced as this one. I show how to cut out the inside and outside of an anchor. ua-cam.com/video/dznTCPdQpDI/v-deo.html
I just found your channel. I love your voice and the way you explain things. You make me laugh out loud. Thank you so much.
Thanks Kandice. Some of my friends say I'm funny but I don't even try to be. I'm so glad you found my channel. Lots of tutorials here if you poke around my Playlists.
Oooooh your so lucky , I wish I could , I won’t till November here in Florida, thank you so much , and have lots and lots of FUN , will be green with Envy, lol♥️♥️♥️♥️
FRANCES HUM Still not finished my swaps despite my hubby and Mom helping me with punching and the Big Shot.
Thank you for sharing this information. Once or twice I was able to cut out the inside of things, but it was totally by accident -- I didn't know why it worked or how to make it happen. I took some notes now! I can't make heads or tails of the manual... Can't wait to see your next video. Sounds interesting!
My husband laughs at me because I hate reading the manual. He can't understand why. I'm self taught but will look up specific things here and there. Thanks for watching Kathy. More to come.
+Papered Chef I always find the best way to get you know your machine is to play with it...
Wow thank u for a great video i learned a lot
Jeanne Luddeni Thanks for watching Jeanne. This is one of the more challenging tutorials on Brother ScanNCut. I hope you subscribe because I will keep the videos coming.
Yes ,it’s the Sampin up Blossoming Basket , it’s Florence, iv listen to your wonderful video so many times , help me please , 😢
FRANCES HUM Oh, I totally understand. You are the reason I made this tutorial. Well, I don’t have the Blossoming Basket stamp set but I’m going to OnStage to coming weekend and I’m sure I will be swapping for one of those. Then, I will see if I can cut it out for you.
I have the latest catalog, looking through it, Not ready to make my order yet,just making a wish list
I own a CM 350, Cricut Cuttlebug :>)
Making a Wish List is a daily activity for me. Thanks for watching and feel free to use this link when you are ready to order. paperedchef.stampinup.net
You have no idea how many videos I've been watching about this and finally I found this one where you explain so clearly, so thank you! However I have a problem and don't know whether the machine is defective or is it me ( since I have followed everything exactly as explained). Here's my problem and I hope you can help me (please!) I just bought my scan n cut 350, tried it and only the first time it cut nicely the image I scanned. After that, when I tried subsequent cuts the machine is cutting not the image I select but only the tiny spaces in between! I must mention that I am not scanning stamped images but a printed cardstock page that has several images on it. Can you help please? Thanks!
Lisette, thanks for your comment. It made my day. I offer classes too since you are new and use the ScanNCut 2 or CM350 for the classes. Now, back to your question. The important thing to remember is that if you want to cut the outside and inside of a stamped image, you would select the second option when using Scan to Cut Data. Then, you would not remove your paper from the mat. It only works in that exact spot. So, you retrieve your saved image and then cut it. You can use Direct Cut again which will only do the outside of your scanned image. Once you remove your mat, you pretty much have to start the entire process all over again because your scanned image moved. thepaperedchef.com/brother-scanncut-courses
I live In Fort Worth, Texas
Hello Texas lady. I thank you for watching my tutorial!
Question... if I wanted to cut out another batch of anchors, can I do that with the saved image? I won’t stamp them till after I cut them out. Hope I am asking it right.
Oh yes, of course. Say for example you have a stamping precision tool like the Stamparatus or Misti. Then, you can cut out a bunch of blank shapes. Make yourself a little template. Then, one at a time, place the anchors into your template and stamp away. I showed an example of this trick in one of my former videos. I will go and grab the link. Thanks for watching.
Xanadumindbody, here is a link to my MISTI stamping trick. So, if you had a bunch of anchors, you would want to place each one into the template so it doesn't slip. Then, the stamp would line up. ua-cam.com/video/MkFnFtAXpps/v-deo.html
Perfect. I love the idea to save cut designs and just stamp with misti. Thank you.
Are you in Florida, Thinking about ordering through you
I’m not in Florida Frieda but you can order with me. I have customers around the USA 🇺🇸 paperedchef.stampinup.net
I'm working on Christmas mugs with designs on them....I don't want the design to cut out, just the hole for the handle of the mug. The image you show is very simplistic it just one inside and one outside line, but how do you do it if you have multiple lines. This could be the same problem the lady with the basket is having, it keeps trying to cut out all the basket weave pieces, and not the area between basket and handle which is the same problem I'm having. Maybe it not possible and I just have to cut the handles out by hand. If not so, or anybody knows how I can do this, would love a shout out on how, and a video would be premo!!!
I did a video with a basket with had loads of lines. I deleted some of them, kept just the inside of the basket and then resized it. Let me get the link. It was very tricky but you can apply this concept to your project too.
Not the exact video I'm looking for but helpful. ua-cam.com/video/LQNUQScg-NE/v-deo.html
Here it is Lisa. ua-cam.com/video/uxk4NLLo_Po/v-deo.html
Pamper, I still can’t cut that basket , that lady was talking about help please 😩😩😩😩😩😩😩
FRANCES HUM Which basket are you trying to cut? Is the lady you are referring to me?