Cutting out Patterned Paper using the Brother ScanNCut - Santa’s Workshop by Stampin’ Up!
Вставка
- Опубліковано 29 сер 2024
- Featured: Brother ScanNCut 2 - amzn.to/2LqTtih
In this video, you will learn how to cut out patterned paper using the Brother ScanNCut. I demonstrate how to cut out the Mrs. Clause and Elves from the Santa's Workshop specialty designer series paper by Stampin’ Up. I also provide a sneak peek at the entire pack of paper and new ribbon which will be available on September 5, 2018 in the 2018 Holiday Catalog by Stampin’ Up! The Scan and Cut we will be using is the ScanNCut 2 or the CM350. I used a blade depth of 4 1/2 for this tutorial. We used Black & White recognition mode. I shared a tip about filling in any gaps with a pencil prior to scanning so that the elves would be cut out with their wagons full of presents.
Related Videos:
Cutting out Patterned Paper - Brother ScanNCut
Toil & Trouble - Cutting out Witches
• Cutting out Patterned ...
Cutting out Patterned Paper - Brother ScanNCut
Toil & Trouble - Pumpkins & Bats
• Cutting out Patterned ...
Check out my ScanNCut courses:
thepaperedchef....
Like me on FaceBook
/ thepaperedchef
Visit me on Pinterest
/ paperedchef
Follow Me on Instagram
/ paperedchef
Shop at our Etsy Store
www.etsy.com/s...
Subscribe to my UA-cam Channel
/ paperedchef
Heading to my craft room to try this!! I’m so excited! ❤️
Jeanne, I am so glad you still have some of this dsp. It is a dream for ScanNCut users. Simply adorable. Thanks for watching and for commenting.
You do an amazing job! I hope Brother compensates you for your tutorials!
you do a wonderful job of explaining on your video
Awww! Thanks for that. Keep on watching. More tips and tricks to come.
Thank you so much for posting this video. It not only helped with my scan and cut, but also tracing with my Cameo!
Awesome. I'm glad you are taking what you learn and applying it to your other machines too. That is why UA-cam is so much fun. Thanks for your comment.
This is the 1st time I found out about connecting the things I couldn't get to cut out like I wanted! Thank you!
Elizabeth N It is a trick you will use time and time again. Get one of those white erasers which don’t leave streak marks. Thank for watching.
I watched my first video of yours with the Coffee Break paper. Well needless to say I had to order the Brother. Everything I know about it I have learned from you. Thanks for taking the time to make these.
deb delillo Thanks for watching. I have loads of videos including a couple of video series to help you get started with the ScanNCut. Here is s link to the two courses that I teach. Be sure to use my coupons if you enroll in my courses:
thepaperedchef.com/brother-scanncut-courses
Thanks for all you do for us viewers! Love the paper!
You are welcome Annmarie. I love sharing any tips and tricks I discover and when I know others are watching and appreciate it, it makes me feel good.
Thanks for the great tip using the pencil. That solves a problem I have been having cutting pattern paper or some stamped images.
Denise Lothrop You are very welcome. I’m self taught with many of the features and I love to share things that I’ve discovered along the way.
Love this video and this paper collection. I am going to try this on some pattern paper I have. What a great idea! Thank you
Thanks Cheryl, you can use this same technique on any patterned paper. If there is good contrast between the image and the background, you can use Black & White recognition mode.
Love watching your videos!
Marion Shanahan Thanks for watching Marion. You can tell I have a paper fetish - love that flocked paper and the texture of it.
Thank you for the video. I really enjoyed it. I want to learn more as I learn on my new SCNC 225
Rhoda Bailey Thanks for watching. Here is a playlist with loads of ScanNCut tutorials on it. ua-cam.com/play/PLQq1-zAm_mlpA3MyqI4DbKwGZlI4mZnAY.html
@@PaperedChef Thank you so much. Do you have a FB page? I just went through the list of videos you sent. Thank you so much.
Rhoda Bailey Thanks Rhoda. This is my public FB page where I share some of my projects. m.facebook.com/thepaperedchef/
@@rhodabailey8575 Here is my FB page. Thanks. facebook.com/thepaperedchef
Now that's just so smart
Thanks for always checking out my new videos Jeanne.
wonderful information. Thank you Angie M
Angela Martino Thanks for watching Angela!
Thank you so much for doing these videos. I love them and they are so helpful. I just wish mine would see the image of the elf and the wagon and the books. For some reason it doesn't pick them up.
Karen Monger Thanks Karen. Did you try the pencil trick I showed? If that doesn’t work in one part of your mat, try flipping the mat upside down. Sometimes the same images are only recognized on different parts of the mat.
Hi been watching you on utube on myd TV. Fantastic video. I don't have a brother scan and cut. Oldish to stupid with technology. Anyway a y chance showing us how to make the pizza boxes. Without a brother scan and cut. Please. I've looked everywhere to buy them. I am from Britain. Thank you so much again
Catherine, Stampin' Up! is in the UK. You purchase the blank mini pizza boxes from Stampin' Up! I am linking to a UK demonstrator for you. His name is Ian and he also has a UA-cam channel. You can buy th boxes from him. stampingwithian.blogspot.com/
I just happen to use the Brother ScanNCut to decorate the mini pizza boxes. You can use a paper trimmer. All I do is cover the boxes but I didn't actually make the boxes because Stampin' Up! makes them very well. They are strong and inexpensive. Here are decorating ideas. thepaperedchef.com/?s=mini+pizza+boxes
Thank you this was great
Yvonne Taliaferro Great! Glad you liked it! I hope you subscribed to my Papered Chef channel.
Which model is this machine? I’m adding it to Santa’s list :-)
Here is the link to the ScanNCut 2 that I'm using. Please tell Santa to use my link if he is going to get you a ScanNCut for Christmas: amzn.to/2wSMJ2T
You know I never thought of that a pencil
Oh yes. Works great. While there is an eraser on the back of the pencil which works, sometimes it smudges. I found a "dust free" eraser and it doesn't smudge. It is like the pencil mark was never there.
Hello! I've just started watching your videos. Great stuff! TFS!! I have a CM350 machine, but I haven't used it that much. I also have the Santa Workshop DSP so I'm following your tutorial but the cut is not clean. It leaves jaggered edges instead of a clean cut. I haven't used the machine that much. I've cleaned and adjusted the blade. Could it be the blade needs changed?
Under The Willow Tree Thanks for your comment. Here are a few tips to help you get better cuts. If you use an outline distance of 0.04, then you will have a nicer cut. If your images are not complete, add pencil marks to complete them. If your blade isn’t sharp, use a ball of aluminum foil between cuts to sharpen it. Make the blade depth higher that you would if you are using the flocked paper because it is super thick. Lastly, if the images are not being recognized right side up, then turn the mat upside down, reload it and try scanning it again.
@@PaperedChef thank you! I've tried everything you mentioned, except the foil ball. I ordered a new blade yesterday, so I'll see how it works then.
Under The Willow Tree Oh, I feel your pain and have to troubleshoot a lot. One more thing I do a lot is open up the bottom and clean the glass. A lot of lint gets into the scanner from my papers.
I have the scan and cut SDX225. I want it to cut around an image so that I will not have to fuzzy cut. Unfortunately when I try, the machine will cut every piece of the image. Example: it will cut out the eyes, the arms, if the image has little flowers then it will cut each flower. The image of a girl you cut in your video from a coloring book would be a nightmare for me. Everything would have been cut. I have tried many times following directions from the manual as well as others on UA-cam. What else can I do? I would appreciate any suggestions.
Sorry to hear that it is doing that. I would try enclosing your image with a pencil line. Then, scan in the girl using Black & White Recognition mode. Then, erase the line with a white eraser. Never use a pink eraser. It shouldn’t leave any marks.
I have a question, I purchased your advanced course and still cannot figure out how to have words saved to my machine and want to bring it to the mat and change the size. I am confused at how to do that. Can you only change to a certain size?? I want to change smaller, which I did but when I cut there was no change
Judy Krueger Hi Judy, ok - so after you wirelessly transfer the file to your machine, you go into the editing mode and then select it. Then, you can resize it. Be sure it is selected and then you can scale it up and down. Feel free to ask questions in Udemy too so that everyone in the class can benefit from the answers.
Excellent tutorial tfs. Will the scan n cut work if you added adhesive sheets to dsp? X
Thanks for watching Chrissy. Yes, it will work fine. I like to do test cuts to cut only though the dsp and not the sticker paper. The sticker paper is hard to remove so I like to use my sticker machine. Also, I use foam adhesives a lot with these embellishments so I don't like to make a lot of them into stickers. Here is a sticker tutorial I did. ua-cam.com/video/B6EuuZz0Mok/v-deo.html
Papered Chef thank you for link , ill watch xx
Another great video
Thanks for watching Stampin' Sue. Just finished a long video on Halloween projects from the new Holiday catalog. I hope you check that one out too.
If you don't have the the color jpeg images on paper, but have the color image jpeg from a free site. After you perform all the techniques, will it cut out in color?
Yes, you can cut out any image using my techniques. Usually, you never need color recognition mode unless you don't have a lot of contrast between the foreground and background. You would scan in the image and cut it out. I am not sure if you are referring to a cutting file but if you are trying to get a shape out of your image and turn it into a cutting file, there are so many more steps. It is called Image Tracing and it is an advanced technique.
@@PaperedChef I will try it. It's not a bought paper like the one you are using. It's a clipart from those printable sites.
@@rhodabailey8575 OK, if that is the case, check out my video on Getting Stared with Brother Canvas Workspace. I also have videos on Wireless Activation and I have courses. You just need to open up the file inside of Canvas Workspace and then cut it by sending it to your machine.
@@PaperedChef thank you again. I will be looking into it today