The visuals are excellent. I was able to easily follow along and understand despite not knowing Hangul. This is the first tutorial video that explained how to lay down aesthetically pleasing lines. Best tip I learned was to look at the part 3D so it looks divided into separate panels.
Thank you, this was the MOST helpful scribing video I've found on youtube. The captions and actions show exactly what to do and the image is clear and easy to follow. Thank you!
New to scribbing and glad I found this video. I hope you could fully translate the whole video because I'm sure the 'detailed' explanation will be much more informative.
Im going to use this technique to design my my car, i built gundam models too when i was younger but nothing like this, love the detail work. I still have my completed models, maybe ill go back and do this.
Recently got into building and painting Gunpla. Going through tutorial vids and watching other Builder's work, I have to admit, watching your progress on the Sazabi absolutely TERRIFIED me! I'd say to myself, "This is too much" and "I could NEVER scribe lines, i'm going to ruin it if I even try." However after watching this video, I'm proud to say that I am now inspired to do this with no fear! In the rare chance that u read this, thank you so much for inspiring me to shake my fear and make my builds that much better!
I understand how you feel. I am working on a Sazabi. All I think about is panel lining. It is frustrating. I am looking at a lot of tutorials, machines and patterns. Thus tutorial is helpful.
Hi! I know I'm late for this video so I don't know if I'll receive an answer, but I hope that you will read this comment: first of all, thank you for all these useful info. A really well done guide. I would like to ask one thing: when you do the sketch to decide how to scrape a piece of the gunpla how do you decide it? Is it done following your personal inspiration for the details you want to add? Is it based on official images of the gunpla, so you take those details from the real-one and add it on a low-detailed gunpla model kit? Or you don't use a reference (like the first case, based on inspiration), but at the same time there are some ""rules"" about what tipe of line and detail you must use, based on particular shapes and details that you have on that single piece?
I wonder how do you achieve symmetry without using some measuring tool? For example, how do you replicate the exact patterns you did on one leg armor to the other?
There are few subtitles but I was still able to get it. thanks for this vid. got some questions: 1) how do you know if it is already deep enough 2) Is it required to put in primer on the panel first? Does it help in deciding if it is already deep enough? Thank you
When the panel line looks good to you its good. Primer is not needed to make panel line, but it will make the panel line imperfections easier to be seen.
Not only the first but also every time you pass through a corner. Or do not connect the corner at once, draw it separately. I hope my translation is correct.
HIQPARTS guide tape 3mm 사용합니다. ua-cam.com/video/uhy1AwiMbrU/v-deo.html 6분 39초 부터 나옵니다 ^^ 곡면에 패널라인 긋는 방법을 말씀하시는 건가요? 특별한 방법은 없고 평면보다 삑사리가 잘나기 때문에 최대한 안정적인 자세로 작업하는게 중요합니다. 손가락을 파츠에 붙여 안정적으로 지지해주고 곡면을 따라 그어줄때 힘을빼고 천천히, 그리고 패널라이너 각도는 그대로 유지하면서 그어줘야 합니다.
@@RAVIPLA yea I think the most important parts that were needed are there, but sometimes when you are talking I feel like I am missing other important aspects. It's understandable you can't cater to all audiences though. Great videos can't wait for the next one.
질문1 답변) 이 영상에서는 설명을 위해 패널라인 스케치 한 부분을 뚜렷하게 보여드리려고 서페를 뿌리고 스케치 해준것입니다. 질문 2 답변) 제가 작업하는 과정은 다음과 같습니다 1. 서페 (샌딩하면서 수축된부분을 쉽게 확인하기 위함) 2. 샌딩 (면정리+게이트정리) 3. 패널라인 작업 (작업한 부분 600방으로 샌딩하고 확인) 4. 전체적인 표면 확인 (800방으로 마무리) 5. 서페 6. 수정 1단계 서페는 생략할때도 있습니다. 굳이 서페를 뿌리지 않아도 샌딩하다보면 수축된부분을 확인할수 있습니다. 1단계에 뿌려준 서페는 면정리 및 도색을 위해 전체적으로 샌딩해주면 다 지워집니다. 5단계에서 서페 뿌릴때 전체적으로 뿌려주고 6단계에서 수정이 필요한 부분이 생기면 수정 후 다시 그 부분만 서페를 뿌려줍니다. ^^
건프라맨 저랑 같은 것인지 모르겠지만 저도 중국제 테이프 하나 사용하고 있는데 얇지만 접착력이 강해서 면이 90도로 꺾이는 곳에 패널을 그을때 가이드로 사용합니다. 처음에 그어주실때는 힘을 최대한 빼고 여러번 그어서 길을 내주시는게 좋아요. 처음에 힘이 들어간 상태에서 그으면 선이 일자가 아니라 미세하게 꾸불꾸불하게 나올수도 있습니다. 물론 가이드 테이프 때문일수도 있고요.
i wonder is there any principal when make complete new scribe ?,like geometry or you just do it as you like ? Unlike military plasmo, i found it hard to do scribing without blueprint, or real picture reference
Not really, it just have to make sense. Imagine how you would cast all the armor in real life. I guess there are some I follow: 1. Mostly it would be obtuse angle 2. A panel line should be a closed line, meaning it goes around and back to itself 3. Short lines for the screws should be at the corner 4. Less is more, don't overdo scribing
@@RAVIPLA I think it will push like metal engraving! I see 2 types of blade, blade type hook (Tamiya Fine Engraving Blades is an example) and blade type straight (metal engraving. That's why I don't understand how it works. Above all, thank you for your guidance.
◼︎ 제작의뢰 및 완성작 구매 문의 (Commission & Purchase Inquiry)
jackers7@naver.com or instagram DM (ravi_pla)
Notice - blog.naver.com/jackers7/222348230829
English speaking youtubers don't have these skills! This is a huge huge help and finally makes scribing something I know I can do.
The visuals are excellent. I was able to easily follow along and understand despite not knowing Hangul. This is the first tutorial video that explained how to lay down aesthetically pleasing lines. Best tip I learned was to look at the part 3D so it looks divided into separate panels.
This is exactly the one that I have wanted to see so far. Deeply appreciate : )
This video has exactly what I've been looking for to start scribing panel lines. Thank you, thank you, thank you
Thank you, this was the MOST helpful scribing video I've found on youtube. The captions and actions show exactly what to do and the image is clear and easy to follow. Thank you!
I'm glad I can help you. 😃 Thank you for the compliment. 😁
Perfect demo and instructions! Appreciate the content!🙏
New to scribbing and glad I found this video. I hope you could fully translate the whole video because I'm sure the 'detailed' explanation will be much more informative.
you are an expert congratulations, with your videos i am encouraged to customize my gunplas.
I'm brazilian
Such awesome art! learning and loving it!!
Thanks for watching.
Thanks A LOT for these videos, they are very enlightening.
정성 가득한 강좌군요.
감사히 잘 보겠습니다.
감사합니다 ^^
Im going to use this technique to design my my car, i built gundam models too when i was younger but nothing like this, love the detail work. I still have my completed models, maybe ill go back and do this.
IDOL! 😁 i dont have to understand your language with this... by just looking all of your movements and procedures... action speaks louder than words 😁
G Plamo18 Thanks. bro 😁 It gives me a lot of strength. 😄👍
Recently got into building and painting Gunpla. Going through tutorial vids and watching other Builder's work, I have to admit, watching your progress on the Sazabi absolutely TERRIFIED me! I'd say to myself, "This is too much" and "I could NEVER scribe lines, i'm going to ruin it if I even try."
However after watching this video, I'm proud to say that I am now inspired to do this with no fear! In the rare chance that u read this, thank you so much for inspiring me to shake my fear and make my builds that much better!
I am so glad to help you through my video. Try slowly one by one. You can do well enough. 👍😀Thanks :)
I understand how you feel. I am working on a Sazabi. All I think about is panel lining. It is frustrating. I am looking at a lot of tutorials, machines and patterns. Thus tutorial is helpful.
패널라인 시도하다가 포기한 상태였는데 영상을 보니 도전해보고 싶은 욕망이 생기는 군요~ 좋은 강좌 감사합니다.
욕망이 생기셨다니 다행이네요! ^^ 천천히 따라해보시면 충분히 잘하실수 있을거에요 ^^ 실패할까 두려우시면 정크파츠에 일단 연습해보시는것도 도움되실거에요 😀
holy crap, glad i found your channel I'm more engaged into detailing now
Very informative and helpful, thanks for the video and the English writing.
I'm glad I can help you. 😀
best scribing video i've seen so far
Thanks....really love the channel!!
Thank you for the English subtitles! This video is great!
Very helpful, thanks!
This helped a lot, thank you!
always thanks for the tips 🙂
outstanding tutorial!
Thanks for watching.
Subscribed!, many thanks for english CC!
Great tutorial thanks very much man :)
You're welcome. Thanks for watching :D
Thanks from Russia. You great and your video is very good)))
⭐️Excellent video⭐️ very helpful ⭐️ thankyou - subscribed 👍
Thank you so much 😄
Ur parts look so good it makes me wanna find a new hobby 😭
Try to start a hobby of pla models. 😄
Shared you’re work to some of my fellow builders and groups 😇 starting to horde some sub. 👍😁
Wow. really? Thank you so much 😀👍
와...... 진정 고수가 여기 계셨네요. 첨 뵙겠습니다.
아가미- 사이드 마운트 고수는 아닙니다ㅠ 좋게 봐주셔서 감사합니다 ^^
Thanks, very helpful
Great tutorial! Very hepfull
Ditoni I'm glad I can help you. 😀
Learn from the best!
Excellent video! Keep it up sir
Thanks
Your videos are so good! They’d be even better with English translations
Thanks for the posting of your work and having added the cc in English.
Dave D hehe :) thanks for watching 😄😄
This was the single best tutorial I've ever seen. Do you have a Kofi, or some other way I can drop you a tip for this lesson?
Hi! I know I'm late for this video so I don't know if I'll receive an answer, but I hope that you will read this comment: first of all, thank you for all these useful info. A really well done guide.
I would like to ask one thing: when you do the sketch to decide how to scrape a piece of the gunpla how do you decide it? Is it done following your personal inspiration for the details you want to add? Is it based on official images of the gunpla, so you take those details from the real-one and add it on a low-detailed gunpla model kit? Or you don't use a reference (like the first case, based on inspiration), but at the same time there are some ""rules"" about what tipe of line and detail you must use, based on particular shapes and details that you have on that single piece?
Master Class
확실히 그릴때 감이 있어야 하는거겠죠..? 어디에 어떤 설정을 줄 지... 그게 제일 어려운거 같네요
thank you
몇mm로 해야하나 궁금해서 찾아봤는데 도움이많이 됐습니다!^^
I wonder how do you achieve symmetry without using some measuring tool? For example, how do you replicate the exact patterns you did on one leg armor to the other?
There are few subtitles but I was still able to get it. thanks for this vid. got some questions:
1) how do you know if it is already deep enough
2) Is it required to put in primer on the panel first? Does it help in deciding if it is already deep enough?
Thank you
When the panel line looks good to you its good. Primer is not needed to make panel line, but it will make the panel line imperfections easier to be seen.
I only speak English but I understood everything. Well done.
Thanks :D
저 같은 경우 기만일지는 모르겠지만 개인적으로 건프라에 디테일 살리는 라이닝 등 센스는 있는데 손재주가 안 되는 타입입니다 ㅠ 어번에 패널 파기 도전하려는데 좋은 영상 잘 보고 갑니다
hi!nice&coool!! good tube
파츠회전 .. 하나 알고갑니다..
콤프 자작 감사합니다^^
nowhere near enough people will watch this video sadly.. great stuff!
How do you decide how the panel lines should look? Are you looking at any art or are you just making up what you think looks cool? Thanks
Best video ghat i have found, i just have one question how do you know how deep to go when making the line?
is sprayed primer before do the scribing better? or this is just demonstrate purpose.
How do you make the exact same lines on the other side? Super helpful guide btw, thx
Please refer to this video. ua-cam.com/video/MHwvL_ze6xo/v-deo.html
Ravi, Do you raise the chisel at every corner to avoid rounding? Or only on the first few passes?
Not only the first but also every time you pass through a corner. Or do not connect the corner at once, draw it separately. I hope my translation is correct.
곡면에 패널라인넣는 방법은 따로 없을까요? 시중에 판매하는 가이드도 있긴한데 그 제품없이 3M이나 투명가이드테이프로 할 수 있는 방법없는지 여쭙고 싶네요
Great video!! Very helpful. I just want to ask, how did you transfer or copy the lines from 1 side to the other? It needs to be indentical right?
Use the divider tool to work with symmetry. I'll take a video later. 😄Thanks :)
@@RAVIPLA looking forward for your next video man 😁
@@RAVIPLA hope fully you have it soon. Very awesome work man
Sir... you are a god... can you make a custom sd cross frame custom? I would love to see your work on that
I'm sorry, I don't have any plans to make it yet. 😭
grate tutorial, helped alot. which kit is that pieces from at the start of the video might i ask please
JunkGuild1 SDCS OO DIVER ACE parts 😀
thank you very much
Did you paint the part before craving? Because the part turn blue after sand paper?
Smooth work pal. Love it
I sprayed the surfacer first, and then I worked. 😀 Thanks :)
@@RAVIPLA Does this mean you apply surfacer again after you are finished panel scribing?
패널라인 테이프 어떤 제품 쓰시나요...??? 그리고.. 곡면작업 요령 알려주세요..ㅠㅠ 시난주 작업하다가.. 망쳐버렸네요 ㅠㅠ 부탁드립니다.
HIQPARTS guide tape 3mm 사용합니다. ua-cam.com/video/uhy1AwiMbrU/v-deo.html 6분 39초 부터 나옵니다 ^^ 곡면에 패널라인 긋는 방법을 말씀하시는 건가요? 특별한 방법은 없고 평면보다 삑사리가 잘나기 때문에 최대한 안정적인 자세로 작업하는게 중요합니다. 손가락을 파츠에 붙여 안정적으로 지지해주고 곡면을 따라 그어줄때 힘을빼고 천천히, 그리고 패널라이너 각도는 그대로 유지하면서 그어줘야 합니다.
패널라인 그리실때 잘보이게 서페를 항상 뿌리고 작업하시는지요?
sang hee yoon 아닙니다^^ 영상에서는 스케치나 선이 그어지는 과정을 잘 보여드리기 위해서 뿌렸고요 주로 패널라인 보다는 수축이 심한 파츠 경우 수축면을 확인하기 위해 뿌리고 작업하는 경우 말고는 잘 안뿌립니다^^
안녕하세요 패널라인 처음 시도해보고 있는데요
도구가 안좋은건지 긁어진 패널라인 안쪽이 깔끔하게 나오지가 않는데 뭐가문제일까요?
킷을 어떤방향으로 만들지 고민이었은데 네이버 블로그보고 만드는 방향을 잡게됫네요 너무 멋지게 만드시는거 같아요
윤모 강 블로그도 봐주시고^^ 좋게 봐주셔서 감사합니다 😃
Ravi, may I know why you do primer before scribing?
To check the contractions on the surface when sanding. But this is a choice, not a must.
Hi, can you make a tutorial about using a thicker chisel, like 1mm? Thanks!
I'll take a video later. 😃
페널라이너는 많이 갖고 있는 쪽이 좋은가요?
Can you suggest what panel line size to use for hg/rg or mg.
Unfortunately I can't speak, understand & read Korean. So I won't get the most out of them, But I do like your
Videos.
The important point was to insert English subtitles. Does it help you?
@@RAVIPLA yea I think the most important parts that were needed are there, but sometimes when you are talking I feel like I am missing other important aspects. It's understandable you can't cater to all audiences though. Great videos can't wait for the next one.
Don't worry. All the important things are in English subtitles. 😀Thanks :)
영상보고 궁금한점이 생겨서 질문드립니다 안바쁘실때 답변좀 부탁드려요^^[[[[[[[[질문1]]]]]]]. 영상에 나온 파츠보면 면정리 다하시고 서페 뿌리신거 같은데 생프라에 바로 패널파는게 아니고 면정리&서페 이후 패널라인 작업하시는 이유가있나요 ? [[[[[[[질문2.]]]]]]] 전체적인 과정이 1차- 면정리/서페 -----------> 2- 패널라인작업 -------> 3차 패널작업후 사포질한부분 서페 재도포 이런식인가요,,
질문1 답변) 이 영상에서는 설명을 위해 패널라인 스케치 한 부분을 뚜렷하게 보여드리려고 서페를 뿌리고 스케치 해준것입니다.
질문 2 답변) 제가 작업하는 과정은 다음과 같습니다
1. 서페 (샌딩하면서 수축된부분을 쉽게 확인하기 위함)
2. 샌딩 (면정리+게이트정리)
3. 패널라인 작업 (작업한 부분 600방으로 샌딩하고 확인)
4. 전체적인 표면 확인 (800방으로 마무리)
5. 서페
6. 수정
1단계 서페는 생략할때도 있습니다. 굳이 서페를 뿌리지 않아도 샌딩하다보면 수축된부분을 확인할수 있습니다.
1단계에 뿌려준 서페는 면정리 및 도색을 위해 전체적으로 샌딩해주면 다 지워집니다. 5단계에서 서페 뿌릴때 전체적으로 뿌려주고 6단계에서 수정이 필요한 부분이 생기면 수정 후 다시 그 부분만 서페를 뿌려줍니다. ^^
@@RAVIPLA 리파인만해보다가 새로 패널라인 창출해봤는데 중국제 싼마이 가이드 테이프 때문인지..(패널라이너랑 맞닿는 부분 끈적임이심함) 스킬부족 때문인지..선이 일자로 그어지는게 아니라 지렁이마냥 미세하게 굴곡이 있네요ㅠㅠ 영상에 나온 하이큐 가이드 제품사려니, 전국 품절인거같고 힝 ㅠㅠ정성스런 답변 감사합니다ㅠㅠ
건프라맨 저랑 같은 것인지 모르겠지만 저도 중국제 테이프 하나 사용하고 있는데 얇지만 접착력이 강해서 면이 90도로 꺾이는 곳에 패널을 그을때 가이드로 사용합니다. 처음에 그어주실때는 힘을 최대한 빼고 여러번 그어서 길을 내주시는게 좋아요. 처음에 힘이 들어간 상태에서 그으면 선이 일자가 아니라 미세하게 꾸불꾸불하게 나올수도 있습니다. 물론 가이드 테이프 때문일수도 있고요.
@@RAVIPLA 조언 감사합니다 예전부터 구독중이었는데 사자비 완성 되는 그날까지 고대 하고있겠습니다!!
May I ask,How can you scribing panel line with curve or a piece that have a curve in it such as shoulder? Thanks
Curved panel lines use templates. But I don't draw a lot of curves. 😀
Do you wear gloves to prevent fingerprints and oil? Great video
To protect my hand. Because I hold the edge of the chisel and work on it. Wipe the plastic residue from the chisel in the left hand :D
@@RAVIPLA ah I see, that makes sense. Why do you prime the parts before you scribe if you're just going to sand again anyways?
This is to easily check the shrinkage of the surface when sanding parts. but not essential.
So should i scrap my tomiya scriber tool
영상 잘보고 있습니다.
감사합니다 ^^
혹시 패널라인중 이미 그려져있는 약한 패널라인이나 몰드의 패널라인을 보강하는 강좌도 괜찮을듯 합니다 ㅎ
네 참고하겠습니다. 감사합니다 ^^
Do you normally scribe before or after applying primer?
Usually scribe - primer
but, primer - scribe - primer (When I sand the parts, I want to check the shrinkage on the surface)
근데 한쪽을 하면 나머지 한쪽은 어떻게 똑같이 하나요???
bmwe cho ua-cam.com/video/MHwvL_ze6xo/v-deo.html 영상 참고해주세요^^ 대칭방법 올린 영상인데 상황에따라 응용하시면 괜찮은 방법이라 생각됩니다. 항상 느끼지만 패널라인 복제하는건 어려운거 같아요 ㅠ
i wonder is there any principal when make complete new scribe ?,like geometry or you just do it as you like ? Unlike military plasmo, i found it hard to do scribing without blueprint, or real picture reference
Not really, it just have to make sense. Imagine how you would cast all the armor in real life. I guess there are some I follow:
1. Mostly it would be obtuse angle
2. A panel line should be a closed line, meaning it goes around and back to itself
3. Short lines for the screws should be at the corner
4. Less is more, don't overdo scribing
와 모건 타고 왔습니다ㅜㅜ 넘 신기하네요
회인사람 방가워요 ㅎ 댓글 봤습니다^^ 앞으로 시간되실때 들려주세요^^
Can you show me how do the same for the other side of the part ?
Please refer to this video. ua-cam.com/video/MHwvL_ze6xo/v-deo.html
좌우대칭은 어떻게 쉽게 맞추나요?
Do you press down hard when you are paneling or do you press very little?
Press gently a few times at first. And press hard. If you press hard from the beginning, you may not get a straight line.
Thank you!
I also bought many engraver blades but it pushed forward, not pulled back like you do! is it different ????
Generally, you have to pull back like me.
@@RAVIPLA I think it will push like metal engraving! I see 2 types of blade, blade type hook (Tamiya Fine Engraving Blades is an example) and blade type straight (metal engraving. That's why I don't understand how it works. Above all, thank you for your guidance.
패널라인은 커터칼로도되나요?
안녕하세요 디바인더 를 구매할려고 하는데 디바인더로 검색하니 안나오네요 정확히 뭐라고 검색해야 나오는건가요????
'콤파스 디바이더' 라고 검색하니 나오네요 ^^ 그냥 디바이더만 검색했더니 제가 사용하는거랑은 조금 다른 유형의 제품들이 나오니 '콤파스 디바이더' 라고 검색하시면 쇼핑에 나옵니다 ^^
RAVI PLA 하아 ! 감사합니다 ㅎ
양쪽을 어떻게 맞추나요? ㅠㅠ
any store to buy with international shiping?
How deep is a basic panel line? Or how deep can I go without risk?
It is good to dig deep for painting. Because it becomes shallow after painting.
Ωραίος ρε!
Εμείς να μην καταλάβουμε τίποτα, δηλαδή;
where did you you those chisel. can you direct me to the specific website or shop?
I bought it on the website of a model mall in Korea. Search for Sujiborido BMC Chisel on Amazon
@@RAVIPLA Thank you so much, I love your work!
@@RAVIPLA Quick question, doesnit really cost $20 to$60 a piece, thank you so much!
A 0.25 chisel instead of a 0.2 chisel would be fine?
0.25 is not used, but it can be a little thick in MG.
@@RAVIPLA Thank you very much for answering. I'll go then for a chisel 0.15 greetings.
투명테이프는 어느회사의 어느제품인가요?
ua-cam.com/video/uhy1AwiMbrU/v-deo.html 6분 39초 부터 나옵니다.
@@RAVIPLA 죄송해요 도구영상에 나와있는데.. 번거롭게해드려서 죄송합니다..
Demian 아니에요~ 궁금하신거 있으시면 언제든지 물어보세요^^
You panel line after you paint or before?
Or after/before primer?
Diego Souza (panel line - sanding - primer - painting) This video was first sprayed with primer to make the panel line look good.
Maybe it would great to put short English captions along the video
The important point was to insert English subtitles. Does it help you?
@@RAVIPLA definitely will help alot!!! Even short subtitles on main points are helpful 👍🏻
All you have to remember is the English subtitles. 😃
All the important things are in English subtitles 😃
Next subtitle Indonesia pliss sir🙏🙏
Beautiful line consistency and corners are not curvy, ah !
실수로 패널라인 하다 실수로 옆으로 쭉가면...
There's no cc! 😢😢
too bad thge CC n English is choppy & erroneous throughout. Made me laugh, also sad... I couldnt finish watching it.