Gunpla Custom Build / SAZABI Ver.Ka LEG Part 01 - Panel line scribing
Вставка
- Опубліковано 17 бер 2019
- ◼︎ 제작의뢰 및 완성작 구매 문의 (Commission & Purchase Inquiry)
jackers7@naver.com or instagram DM (ravi_pla)
Notice - blog.naver.com/jackers7/22234...
◼︎ instagram
/ ravi_pla - Навчання та стиль
![[GUNPLA] MG SINANJU GUNDAM GLOSS BLACK Ver. FULL BUILD](http://i.ytimg.com/vi/VRpE5CrTWnw/mqdefault.jpg)
◼︎ 제작의뢰 및 완성작 구매 문의 (Commission & Purchase Inquiry)
jackers7@naver.com or instagram DM (ravi_pla)
Notice - blog.naver.com/jackers7/222348230829
Best features of this video:
1. Listing the part number
2. Listing the tool used for each step
3. Double checking attachment points
4. Before and after shots of each line and the part as a whole.
You're my new go to tutor for taking my customizing to a whole different level.
Nice video. Best gunpla custimization tutorial video i've ever seen. You should get more acknowledgement from gunpla builder out there. A lot builder make video kind which is show off rather than turoring, that we (beginner gunpla builder) don't have a clear idea about how and they customize their gunpla.
Thank you for the compliment. 😃I hope my video will help many beginner gunpla builder 😄
now i have my reason to get sazabi ver ka after seeing repeatly all the videos you've upload..nice tutorial👍🏼
볼때마다 엄청 잘하시는구나 라고 감탄만 할 뿐 엄두도 못내서 해보지도 못하고 눈팅으로 공부만 하고 있어요 ^^ 좋은 영상 감사합니다 ...
Thank God I found your channel again. I stopped building for a little bit but remember a channel thst did amazing scribing tutorials and mods but couldn't find it until this video popped on my feed. Amazing work ravi seriously
Thank you so much ! nice to see you again :D
I’ve learned so much from your channel! Thank you!
Great jobs! Definitely master piece. Please kindly keep on sharing more!
Thanks 😃I'll upload it steadily
Your work is great! You've inspired me to practice my skills and make videos too! Please keep sharing!
I'm glad I can help you. 😄 I've subscribed to you :)
Thank you sweet baby Jesus for someone actually coming out with THEE ACTUAL BEST Gunpla tutorials on UA-cam, you rule dude!
Thank you for thinking that way. 😃
@@RAVIPLA I hope these keep coming. I'm interested to see how someone much more skilled than I masks and paints these up.
@@hazardbrewing2821 I will upload the painting process later. 😃
Can't wait to see the finished Sazabi !
I'll try to finish it quickly. 😀
Been following these works since in you’re IG... 👍 literally a master piece.
Wow !👍 Thanks 😀😀
RAVI PLA
Cheers brother 🙏 keep it up 👍
Beautiful design! So professional
Lain Lain thanks 😁😁
As usual, awesome work man, i like it 👍👍
Thank you for the compliment. 😃😃
와우ㅋㅋㅋ다 외국분들 댓글만ㅋㅋㅋ
어마무시하네요 잘보구 갑니다
인스타에 외국인 팔로워가 많아서 그래요 ㅎ 방문해주셔서 감사합니다 ^^
Saw his ig along with another dude that both had ridiculously amazing scribing and sculpting skills.
Thank you for the compliment. 😄
앞으로 좋은 영상 자주 부탁드립니다! 화이팅!
Musasino PLAmodel 앗 무사시노님 감사합니다^^ 채널 구독해서 잘보고 있습니다^^ 최근에 연기하신 영상도 아주 재미있게 잘봤어요 ^^ 😀 방문해주셔서 감사합니다^^
아 ㅋㅋ채널을 보자마자 구독했구, 기대가 큼니다^^ 많이 배울께요.
@@MusasinoPLAmodel 제가 많이 배우고 있습니다 ^^ 앞으로도 좋은 영상 많이 부탁드립니다 ^^
You make things look so easy. Thanks
Andrea Buratta I'm glad I can help you. 😃
Very cool!
I have a question to ask that it's puzzled me a lot. How to build the feet as you did? I watched all of your video, but it's not mentioned.
카페에서 보고 구독눌렀어용~
송준희 앗 감사합니다^^ 도움되실수 있게 좋은 영상 올리겠습니다^^
More vids pls 😁 Awesome vid by the way 👌
okay. thanks 😄
This is amazing!!
Thanks Simon Lam 😄
Nice work
You sir are a legend.
thanks :D
Maaan your work is amazing and I'd love to be a quarter as good as you, someday. Right now it's the hardest part of building for me 🤣
That so nice keep trying.
Good luck to you :3
Natari Odes thanks :)
I loved your Sazabi tutorials. I'm just curious. Did you prime before you added details? And then you sanded it down again? Sorry, I'm kind of confused. I'm a beginner and I want to learn more. Hope you notice my comment. Thank you and more power! 😊
Excellent work as usual. Could you put some links to those chisels that you use please
영상 잘봤습니다. 대단한 작업입니다. 한가지 궁금한게 좌우 대칭도 그냥 눈대중으로 스케치를 하시는 건가요?
좌우 대칭은 주로 디바이더 공구를 활용합니다. 나중에 영상을 찍어볼께요^^ 시청해주셔서 감사합니다 ^^
sooo goooooooooooooooooooooooooooooooood
Hi... your work it's amazing... what clear tape are you using. And where do you get the chisels???
Please watch this video. ua-cam.com/video/uhy1AwiMbrU/v-deo.html
Awesome job man! Keep it up, im following you in Instagram also.
thanks 😁😁
This is godlike
Thanks 😃
Awesome panel line tutorial!! I noticed you used 0.5mm chisel to create a groove at the bottom of the Sazabi’s foot. I want to achieve this outcome on 144 scale gunplas. Could you tell me what sizes of bmc I may need? Cause you know, they are not cheap. Thank you!
Urgent Quest sorry.. Where exactly are you talking about? 😭
Nice
영상 잘 봤습니다!! 영상에서 붙이시는 테이프는 일반 테이프인가요?
How do you actually make it that greying colour ?
What tool is he using for that much thicker panel line?
Have you considered wearing some of those cut-resistant gloves? I just bought a pair for 12 bucks. they prevent cuts from a slip of the knife.
He does not wear the protective suit because he plans on being precise and successful. The added danger just makes him better. It is in the spirit of Char
what is the clear material he is using to make the lines?
So sick
infinati thanks 😃
Awesome. Where can I get these tools?
What were the clear sanding sticks you used I never seen them before
This is an acrylic stick with a sandpaper. See this video. from 8:40 ua-cam.com/video/uhy1AwiMbrU/v-deo.html
Which grade are you using
패널라인팔때 붙이는 테잎은 어떤건가요?
꼭단디해라 투명한 가이드 테이프 입니다. HIQ parts guide tape 3mm 사용합니다^^
라비님 체널보면서 페널라인 뽕맛을 느꼈는데
bmc가 최고긴하네요.
타사제품쓰면 확실히 느낌이 영~~~ㅎ
그런데 0.15mm를 뽀각해서 큰일이네요ㅜㅜ
따라할래야 따라할 수 없는...
Amazing work
Thanks 😄
if you dont mind, can you make a series of these detailing u made from head to toe, begining till the end?? i think that would be amazing
I'm going to continue uploading the process of making it 😀
Can you show how you fix a mistake? Do you have multiple kits? What can fill it and then be scribe again? Asking for a friend.
How much force do you usually used when using the chisel?
Press gently a few times at first. And press hard.
You got a sub from me!
Thanks 😀😁I'll upload it steadily.
Do you use more 0.15mm or 0.2mm for normal panel line?
Beng Kiat Yap Sometimes I use it. It is useful to mix with 0.15 or 0.2. 😃
Whats the plastic flim he is using called
What tape did you use for guiding the scribber? Seems stick to the parts strong enough..
i used HIQPARTS carving guide tape 3mm 😀
Thx nice info..
Hi! This is fantastic work! I'm very keen to start on doing scribing myself. But i have a question....... Scribing to custom on one side is hard but not too bad. But how do professionals like yourself especially with the amount of scribing work done to a right leg managed to do it identical to the left leg in terms of measurements & especially the angles of the lines? This is the portion that i wonder always as doing one side is hard enough but doing both sides the same is crazy work. Hope you can share your technique & advise as so far in the video we only see it being done on one side. Cheers & keep up the fantastic work!
Ben Tan ua-cam.com/video/MHwvL_ze6xo/v-deo.html I don't know if this video will help you. Duplication the panel line is a difficult and hard work for me, too. 😭
OMG! I just saw your other videos & you were teaching how to duplicate it. Its crazy man but again you are doing a fantastic job as well as the video for people like me to learn the process!!!!! Keep it up man!!!! @@RAVIPLA
It's hard for me to duplicate panel lines, too. So, I often work with my eye measurement. But from the naked eye, I am satisfied if it looks the same... 😅
Hi do u wear glove for video purpose or u wear it most of the time? Would'nt it gets uncomfortable?
I'm uncomfortable right now, so I take off my gloves and work on them. I used to wear it to protect my hands.
Wow
Thanks 😃
RAVI PLA ...ur welcome...👍
How many bmc chisel mm do u use ?
Use 0.15,0.2 for thin and 0.5 for thick mainly. Also use 1.0 or larger sizes for sculpting purposes.
⭐️⭐️⭐️⭐️⭐️ 😎 👍
Thanks 😄
That 0.5mm chisel looks like 1mm to me.. And the 0.2mm looka like 0.5mm.. I have created my own chisels. So I'm wondering if the chisel you have is acurate or maybe I am just seeing and estimating it wrong
Why do we need to put a scotch tape before scribing? Thank you sir
It's not a Scotch tape. This is a scribing guide tape. To draw the panel line straight.
⭐⭐⭐⭐⭐
Thanks :D
Helo sir, please show us how you make symetrical on right and left side.
I would love to get a tools list video
I'll make it later.😄
it look like starwar
I think so, too. 😄
Thanks a lot, could you please show the tool list (name, brand, specs)?
okay, I'll take a video later. 😃
What brand sanding block did you use?
It's a sandpaper attached to an acrylic stick.
Handmade? Cool..
ua-cam.com/video/uhy1AwiMbrU/v-deo.html from 9:54
egrish?
Hi, can I post your video on my Facebook fans page?
Can you please tell me where I can buy the carving tools you are using?
alentor I bought it at a model mall in Korea. I'll give you a list of tools later.
@@RAVIPLA much appreciated! Thank you
alentor you’re welcome 😀
alentor I plan to make a video of the tool list.
That is great! Thank you
Bro.. Prime first or scribe first??
scribe first. I sometimes primer first and scribing. The reason is to easily check for shrinkage on the surface when sanding parts. Sprinkle primer again after scribing
@@RAVIPLA thanks brother👍