Hi do you have a link to where you bought those tools specifically the divider and the pin vises I have been looking for those exact ones but don't know the model names and numbers and where to look...thank you!
Hi, for anyone else who has struggled to find the chamfering tips online, I have found that the ones used by RAVI PLA are most commonly (in english at least) called stone setting burrs and used primarily within the jewellery business. Busch branded stone setting burrs seem the closest to what he uses here and come in incremental metric sizes. There are also lots of other shapes of cutting burrs besides this 90 degree cone, all of which which may have great use in plastic modelling. Hope this helps people!
Not only is the video quality of this superb and properly focused, but the English explanations are completely on point. And so thoroughly explained. Thank you so much!
Thank you for another great video. Your subtitles are so helpful too. Your other tutorial videos are some of the best for scribbling lines and I cannot wait for the next one. Keep up the great work.
Thank You!!!! I've been looking for a while now how to bring back the edges of a piece and now I realize it was because I've been using the wrong tools all this time. Man thank you so much for this video, much love & respect from Panama! Looking forward to your next videos, can't wait!
So i just started gunpla this month and been watching your vids on detailing and I am really excited to actually try my hands at this. Your videos are easy to understand and love your work!
would really love it if you could make another video of introducing tools for painting and the guide to do them. cause there really isn't any video out there to teach like you do..
Amazing work. Always wondered how some people got all that detail scribed on. I went for a cheaper version of chisels for now but hope to get some MadWorks of BMCs later. Your work is simple....I can't even come up with a proper word for how good it is. Hope you keep making videos like this for a long time.
Cheers for the video, very informative. I especially like the idea of using Square Acrylic Rods for Sanders, and the results you get are really sharp it seems. Being in the UK BMC Chisels are really expensive as we have to import, however, I can get hold of some Funtec scriber/Chisels, so may give them ago. The same story for the Godhands Sanders, so I'm thinking about getting some Stainless Steel Flat Bars cut instead, should work the same. I've only been subscribed for a week and feel like I've learnt so much. :-D
Thanks for watching. 😀 Acrylic sanding stick is a good tool for making the sharp of gundam 😁 I think there are many tools to replace BMC chisel. If you can make a stainless sanders with the size you want, it will be very useful. 😄
Great video! Really gave me an insight to some tools that I hadn't tried using yet. A bit harder to find equivalents to the tools you use, in North America. Luckily Amazon has some of them lol
Thank you so much for your videos, I appreciate the time taken to translate them as well. I must know... what company makes the tweezers you use. They look very high quality, and I am ready to upgrade mine.
thank you very much for sharing, it helps really a lot. It would be very usefull to know where it is possible to find these tools online! thank you again, really a great video
Hi ! Great video. I want to buy the chisel of BMC but it's impossible to buy when we live in Europe. Indeed even in Amazon it's out of stock. Do you know if the brand BMC still exists ?
Great video! I wish I could get more of these products in the united kingdom. Do you typically use these techniques on the 1/100 Master Grade or on 1/144 High grade kits?
![RG 제타 건담 디테일 업 도색 하기 / RG ZETA GUNDAM FULL BUILD [G(GUNDAM)LOG by 블랙니퍼]](http://i.ytimg.com/vi/lXh5jtic1mY/mqdefault.jpg)
0:11 아트나이프 - 올파 (hobby knife - OLFA)
0:28 톱 - 올파 (saw - OLFA)
0:38 니퍼 - 3.peaks MK-02 (nipper - 3.peaks MK-02)
0:54 패널라이너 - BMC (chisel - BMC)
2:00 조각도 - MIKISYO (burin - MIKISYO)
2:14 핀바이스 - 마하 (pin vise - MAHA) / MMPZ-0140AA
2:23 면취팁 (stone setting burr)
2:39 철필 - 하세가와 (modeling scriber - HASEGAWA)
4:34 에칭파츠 - G-Temple (Etching parts - G-temple)
5:45 스핀 블레이드 - 갓핸드 (spin blade - GodHand)
6:39 패널라인 가이드 테이프[3mm] - HIQPARTS (scribing Guide Tape[3mm] - HIQPARTS)
7:05 디바이더 (divider) - TUTORIAL : ua-cam.com/video/MHwvL_ze6xo/v-deo.html
7:20 에칭자 - HD MODEL (etch ruler - HD MODEL)
7:49 줄[12mm] - HD MODEL (file[12mm] - HD MODEL)
7:56 줄[4mm] - SUJIBORIDO (file[4mm] - SUJIBORIDO)
9:24 사포스틱[6mm] - 갓핸드 (Stainless sanding stick - Godhand)
영상에서 나오는 도구는 제가 직접 사용해왔던 도구이며, 개인적으로 사용하면서 느낀점을 다뤘으니 참고 바랍니다 😀
The tools that come out of the video are the tools that I've used myself. I explained my personal thoughts. 😀
Hi do you have a link to where you bought those tools specifically the divider and the pin vises I have been looking for those exact ones but don't know the model names and numbers and where to look...thank you!
@@Fifteenthdark I bought it on the Korean model website. For pin vise, search for 'MMPZ-0140AA'. The divider can not find the number. 😅
안녕하세요 혹시 2:00 나오는 조각도가 몇mm 인지 물어봐도 괜찮을까요?
Junghyun An 4.5mm, 6mm 입니다^^
@@RAVIPLA 감사합니다 댓글 직접달아주시구요^^
Hi, for anyone else who has struggled to find the chamfering tips online, I have found that the ones used by RAVI PLA are most commonly (in english at least) called stone setting burrs and used primarily within the jewellery business. Busch branded stone setting burrs seem the closest to what he uses here and come in incremental metric sizes. There are also lots of other shapes of cutting burrs besides this 90 degree cone, all of which which may have great use in plastic modelling. Hope this helps people!
Thanks. Many people found this. I'll share this with the channel community.
This was exactly what I needed hahaha
Ah thankyou so much! Was really struggling
thanks alot my man
Really appreciate the English explanation... Thank you so much...
You're welcome. It's for you. 😁😁
@@RAVIPLA can you suggest one file sanding brand?
Yes, thank you!
Not only is the video quality of this superb and properly focused, but the English explanations are completely on point. And so thoroughly explained. Thank you so much!
Thanks for all the praise. 😄😄
The kit is simpler than many I know but still very effective, proving the problem is always the artist not their brush
Thank you so much for demonstrating your tools and techniques. I've been modelling for over 30 years and I'm still learning.
Thank you for another great video.
Your subtitles are so helpful too.
Your other tutorial videos are some of the best for scribbling lines and I cannot wait for the next one.
Keep up the great work.
Thanks for all the praise. 😄😁
That's brilliant! I've been modeling for years, but not come across the acrylic baton /sandpaper idea before. Great idea!
친절한 설명 감사합니다. 요즘 라비님이 올려주시는 건프라영상보면서 새로운 취미에 눈뜨게되었습니다 감사해요 !
Thank You!!!! I've been looking for a while now how to bring back the edges of a piece and now I realize it was because I've been using the wrong tools all this time. Man thank you so much for this video, much love & respect from Panama! Looking forward to your next videos, can't wait!
I'm glad I could help you. Gracias ! 😀😁
So i just started gunpla this month and been watching your vids on detailing and I am really excited to actually try my hands at this. Your videos are easy to understand and love your work!
Thanks for watching 😄
Thank you for the very helpful videos. This will help me greatly in making my Gunpla and any other model look like the way I envision it.
영상이 너무 친절한것 같습니다 , 제품설명이라든지 사용 용도라든지 , 너무 감사합니다
앗 저랑 닉네임이 같으시네요 ㅎ 좋게 봐주셔서 너무 감사합니다 😄
would really love it if you could make another video of introducing tools for painting and the guide to do them.
cause there really isn't any video out there to teach like you do..
Thank you very much for the video. It gave me ideas and new techniques to try!
Thank you for the help. I’m just starting and this video is a great start!
I'm glad it helped :D
Very useful to see you giving a little demonstration of each tool you use
I wanted to give you as much help as possible. 😄
Thanks a lot for sharing all these information! I'm using also the BMC chisels, but for my figurines, it's fantastic tools!
The bmc chisel is expensive but a good tool. Thanks for watching. 😄
잊을만하면 이이영상을 정주행하면서 안써본 툴을 써보기로 마음먹고 가네요. 양질의 영상 감사드려요 라비님
Great job with the subtitles. And once again good video. Showed tools I never thought of using
It is hard to write subtitles in English. But I am glad to be able to help many people. 😄Thanks for watching :)
@@RAVIPLA yea I get that. But you do subtitles well enough that if something isn't right I can figure it out. Just do the best you can when u can.
okay. I'll try my best. 😄
I'm just starting out with making Gundam models, and your videos have been a big help so thank you.
Jerebear thanks for watching 😄😄
차분한 설명덕분에 더 몰입해서 볼수있었습니다. 작업 쉰지 2,3년 됬는데 다시 시작하고 싶은 마음이 드는 영상이네요^^
좋게 봐주셔서 감사합니다 ^^
Using a Compass like that as a way to scribe line parallel to edges is incredibly ingenious!
Thanks. Please watch this video. ua-cam.com/video/MHwvL_ze6xo/v-deo.html
Your stuff is amazing! really inspiring me to spend more time in the hobby!
I'm glad I could help you. Thanks for watching.😀
I'm just starting my hobby in gunpla, and this video helps a lot, thank you mister, you're awesome :)
I'm glad I can help you. 😄Thanks :)
Love your videos! I learn a lot! Please keep on making one, more power to you ravi-pla sama
hehe 😄 I'm glad I could help you. 😁
Thank you for making this video, I hope I speak for the gunpla community it was very helpful
Amazing work. Always wondered how some people got all that detail scribed on. I went for a cheaper version of chisels for now but hope to get some MadWorks of BMCs later. Your work is simple....I can't even come up with a proper word for how good it is. Hope you keep making videos like this for a long time.
Thank you for watching my video well.
That sanding stick acrylic was brilliant.
I'm happy because i found a model builder with the same ideas about acrylic sponge like me.You can try with ice sticks.Good modelling
It's a great idea for ice stick :D
Thanks for doing my video idea! Amazing stuff 👌
I'm glad I could help you. 😁
Thank you more modeling vids to come 😁😁 saw you on instagram nice modeling skills 👌👌👌
Oh. Thank you so much ! 😄
This was very informative. Thank you for the English Subtitles.
@RAVI PLA found the guide tape. Thank you!!
자세한 설명 좋네용 ~
자주 찾아오겟습니다 ㅎ
좋게 봐주셔서 감사합니다 ^^ 😄
Yes been curious what you use to perform your magic... Love your work ! Keep it up!
K' Juho Tan haha😄 Thanks for watching. 😁
Thank you for the list! Greatly appreciated
This was useful! Thank you! 🇨🇦
이형님은 진짜네요.
진짜 고수가 나타났다..^^!
고수는 아닙니다 ㅠ 좋게 봐주셔서 감사합니다 ^^
It’s very useful Thank you.
You're welcome. Thanks for watching. 😀
Oh. Now I want to buy those "spin blades"! Awesome!
I think it's a good tool. 😄
Thanks with all the explanation and english subtitles
You're welcome.😄 Thank you for watching :)
Thank you been looking forward to this one
Thanks for watching 😀
Cool... the champer tip does really help cleaning those holes...🙌🤔😁
You're right. It's a really good tool. 😁
Very helpful tips! Thank you
Such a Great Video , Thank You Ravi
You're welcome. It's for you. 😁
Fantastic. It is a very useful tutorial. You are crystal clear.
I'm glad I could help you. 😄Thanks for watching :)
도구소개와 친절한 설명 감사합니다 :)
좋게 봐주셔서 제가 감사합니다 ^^
Thanks for adding the tools you use ! Is it possible to add links for metal etching parts and bead sets please?
Thanks so much for this! I had wondered if those were just acrylic bars with sandpaper attached. I'll have to look for some bars or order some.
I'm glad I could help you. Thanks for watching. 😁
Great video and thanks for the subtitles
Thanks for watching 😀
Fantastic. Thank you for this video. I will upgrade my toolbox as required.
You're welcome. Thanks for watching 😄
@@RAVIPLA I have now placed my orders for chisels, spin blades, tapes, etching materials and a host of other goodies. Many thanks for this video 😁
@@MikeFromOz I'm glad I can help you. 😄
Hi. Thank you for sharing your tool list. It is very informative. May I ask whether wood chisel can be used instead of burin?
Scribing is how you bring your kits to the next level. This guy is beyond competition level for sure
Muy Bueno Thanks for all the praise.
I was waiting for this. Thank you.
You're welcome. Thanks for watching 😄
Cheers for the video, very informative.
I especially like the idea of using Square Acrylic Rods for Sanders, and the results you get are really sharp it seems. Being in the UK BMC Chisels are really expensive as we have to import, however, I can get hold of some Funtec scriber/Chisels, so may give them ago.
The same story for the Godhands Sanders, so I'm thinking about getting some Stainless Steel Flat Bars cut instead, should work the same.
I've only been subscribed for a week and feel like I've learnt so much. :-D
Thanks for watching. 😀
Acrylic sanding stick is a good tool for making the sharp of gundam 😁
I think there are many tools to replace BMC chisel.
If you can make a stainless sanders with the size you want, it will be very useful. 😄
Best tools video i have ever seen
Thank you so much ! 😀😁
U inspired me to scribe my own panel lines, even if I only can use a knife and non hobby scriber and get jagged lines it's still fun
thanks 😄
thank you for the video . really helps knowing what the pro use. :D
I'm glad I could help you. 😄
엄청 자세하게 설명해주시네요ㅎㅎㅎ좋아요 누르구 가요^^
말을 잘 못해서 어색하기만 하네요 ㅠ ㅎ 좋게 봐주셔서 감사합니다 ^^
Thanks for explaining the tools.
Thanks for watching 😄
very nice video. a lot of tool and good sample. Thank you.
Thank you for watching.
Thanks for the video! Now I know what to save for.
Thanks for watching :)
Thank you for posting this!
Thanks for watching. 😃
좋은 리뷰 감사드려요~ㅠㅠ 아크릴제단은 은근히 사각막대는 찾기어렵네요 ㅎㅎ
oh hell yeah!!!!!!! thank you RAVI PLA.
James Albert You're welcome. 😄
i love this video. Thank you 😍
Thanks for watching. 😄
Very informative... thank you for the ideas... :)
Thanks for watching. 😄
Sanders from the 8th MS Team "This guy is an Ace!"
haha thanks :) I'm watching your gunpla review video well.👍
thanks for the video, where did you get the chamfering bits from? I cant find them under a google search.
Ty so much for the vidio I been waiting excitely for it
I hope that this is helpful for you. 😀
Thank you for the video
Thank you for sharing, very informational .
You're welcome. Thanks for watching :D
If the cement with the mixture of the runner is thin, can it be also use as a paint??
좋은 영상 감사합니다~~ 올파 톱 커버는 어떤건가요???
Great video! Really gave me an insight to some tools that I hadn't tried using yet. A bit harder to find equivalents to the tools you use, in North America. Luckily Amazon has some of them lol
Amazon? That's a relief :D
i'm from canada and couldn't find anything similar to RAVI PLA's tools. What was the name of the tool you found in amazon?
Where did you get the metal nuts and bolts? I'm having a hard time finding them.
great video, thank you for the translation.
Thanks for watching. 😄
Also, you should absolutely put together an Amazon affiliate shopping list for all your tools and materials!
Thank you for this video!
You're welcome :D Thanks for watching. 😄
Thank you so much for your videos, I appreciate the time taken to translate them as well. I must know... what company makes the tweezers you use. They look very high quality, and I am ready to upgrade mine.
I don't know the brand. It's cheap and common tweezers.
Very helpful 👍
thanks ! i really appreciate it
Thanks for watching. 😄
Where did you purchase your dividers? I cant seem to find a small one like yours.
Does the 0.125 and 0.15 chisel panel lines very close/almost the same ?
thank you very much for sharing, it helps really a lot. It would be very usefull to know where it is possible to find these tools online! thank you again, really a great video
You're welcome. Thanks for watching :D
do you do different chisel brand comparisons? BMC chisels is out of stock worldwide :(
thanks for the video, Master!
You're welcome. Thanks for watching. 😀
อยากเรียนวิชากับอาจารย์ครับเสียดายอยู่คนละประเทศ ติดตามผลงานของอาจารย์อยู่นะครับ
Hi ! Great video. I want to buy the chisel of BMC but it's impossible to buy when we live in Europe. Indeed even in Amazon it's out of stock. Do you know if the brand BMC still exists ?
잘봤습니다~! 도색작의경우600방으로 마무리하고 서페올리고 도장하면 도장면이 충분히 이쁘게 나올까요? 무광도색만 할거같습니다~!
What kind of airbrush do you use?
Great video! I wish I could get more of these products in the united kingdom. Do you typically use these techniques on the 1/100 Master Grade or on 1/144 High grade kits?
I mainly make Master Grade scale.
@@RAVIPLA Thanks for the reply! I have my first 1/100 Gundam kit on the way soon.
Thank you so much for this
You're welcome. Thanks for watching. 😄
very informative, would like to see the gunpla u did before,
It was BAWOO and PROVIDENCE that started the detail work. This is in the playlist Finished. 😄
Hi bro, can i ask where did you get those metal upgrade screws?
Can u tell me where i can buy that chamfer tip, and what brand is that? I can't find it online in that size
learn a lot, thanks .
You're welcome. Thanks for watching. 😄
좋은 영상 감사합니다. 혹시 조각도 두 개 쓰시는거 미리 수 알 수 잇을까요?
Thanks