Your techniques are so useful and the results look great! Really enjoy watching your work :) I have a question though, when you paint using lacquer paint, do you wear a mask/respirator?
How do you clean the panel line without damaging the paint applied? Is it okay if I use tamiya acrylic and enamel thinner instead of mr hobby lacquer thinner?
The way i learned watching is videos, is that gundam markers have lacquer in them and tamiya accent is enamel. Enamel don't eat trough lacquer, but lacquer would eat trough enamel. So you have to use markers first, clean with lacquer or rubbing alcohol, then tamyia accent and clean with Zippo ligthing fluid or enamel. Be careful, if you use too much enamel or lacquer will damage the plastic (had it happened to me).
Love your work and I can't wait to try this on my Sazabi! How do you keep the thinner from damaging the plastic? Do you work under a fan or something so that it dries faster?
Unless you soak the plastic into the thinner, you dont really have to worry about it damaging the plastic too much... He paints in very thin layer and small areas, there arent enough thinner in the paint to sit on the plastic long enough for it to do enough damage. I have seen horror pictures of broken plastics and I am sure they didnt paint like him - fast light coats. Painting like him, there is little to worry about (unless some old kits).
@@parnashwind thanks for the reply, I've read the horror stories and have been afraid of experimenting because of them, guess I'll just have to give it a shot and hope not to become one of them.
@@ianrmrz Part of the fun of model building is about experiments and discoveries 😉. If you havent tried brushing solvent before and is unsure, start with small areas. Start with outer armor pieces and avoid joins and moving parts. Usually thinners dont outright destroy the plastic. What happens is that they make the plastic brittle and hence easier to break and crack when pressure is applied; like when pressing two pieces together or when joins are affected.
![NU GUNDAM RG: part.10 [complete]](http://i.ytimg.com/vi/yYiqs6pTIZY/mqdefault.jpg)
![NU GUNDAM RG: part.10 [complete]](/img/tr.png)
Your techniques are so useful and the results look great! Really enjoy watching your work :) I have a question though, when you paint using lacquer paint, do you wear a mask/respirator?
뉴건담 너무이쁘네요👀👍👍
역시 목소리가 나오니 더 재밌네요. 잘보고갑니다!
Love these videos! Awesome!
rg뉴건담 자체가 순정 자체가 잘나와서 부분 도색하긴 정말 좋은거 같습니다
좋은 팁! 감사합니다!
좋은팁 잘 보고 갑니다.마커도 유용 하군요.!!!!
저도 mg건담발바토스 조립만들어서 기대됩니다 고사장님~^^
Big fan!! Keep up the good work!
오우~~~# 깔끔 간지~~~~
Just wanted to ask.. is Mr Color paints that you are using enamel, acrylic or lacquer? Sorry quite new to this....
오 ㅜㅡㅜ 더빙최고
역시 더빙이 있으니까 집중이 잘되여..ㅎㅎ
목소리 더빙 좋아요 ㅎㅎ
I'm curious, did you top coat before painting? Didn't see you do it in any of the videos
The top coat will be used last time. I don't use it yet ~
일단 광고보고!
뉴건담은 언제 끝날지 기대되네요
How do you clean the panel line without damaging the paint applied? Is it okay if I use tamiya acrylic and enamel thinner instead of mr hobby lacquer thinner?
The way i learned watching is videos, is that gundam markers have lacquer in them and tamiya accent is enamel. Enamel don't eat trough lacquer, but lacquer would eat trough enamel. So you have to use markers first, clean with lacquer or rubbing alcohol, then tamyia accent and clean with Zippo ligthing fluid or enamel. Be careful, if you use too much enamel or lacquer will damage the plastic (had it happened to me).
Love your work and I can't wait to try this on my Sazabi!
How do you keep the thinner from damaging the plastic? Do you work under a fan or something so that it dries faster?
Unless you soak the plastic into the thinner, you dont really have to worry about it damaging the plastic too much... He paints in very thin layer and small areas, there arent enough thinner in the paint to sit on the plastic long enough for it to do enough damage. I have seen horror pictures of broken plastics and I am sure they didnt paint like him - fast light coats. Painting like him, there is little to worry about (unless some old kits).
@@parnashwind thanks for the reply, I've read the horror stories and have been afraid of experimenting because of them, guess I'll just have to give it a shot and hope not to become one of them.
@@ianrmrz Part of the fun of model building is about experiments and discoveries 😉. If you havent tried brushing solvent before and is unsure, start with small areas. Start with outer armor pieces and avoid joins and moving parts. Usually thinners dont outright destroy the plastic. What happens is that they make the plastic brittle and hence easier to break and crack when pressure is applied; like when pressing two pieces together or when joins are affected.
3:43 에 건조 지연제는 아크릴물감을 쓸때 많이쓰이는 리타더 (retarder) 라고합니다
건담 마커로 부분 도색하고 에나멜 패널라인으로 먹선 넣은 후 에나멜 신너로 먹선 수정할 때 마커로 부분 도색한 부분도 지워지나요?
다만 메탈릭 컬러는 광이 죽어버리니깐 에나멜 먹선을 넣을수 없습니다;;;
JESUS! Your style of painting Is amazing dude :3
master of LED otaku shifu!
I saw your work and you have great skills !! :)
40넘었는데 좋아하고있었돠..
제가 붓도색 해볼려고하는데 어떤 도료가 괜찮을지 모르겟는데 ㅜㅜ 에나멜이.좋을까요.
군제가 좋을까요? 마감제 하면 도색한곳 색이 이상해져서 고민이네요 ㅜㅜ
와 .. 난이도 극악인 락카로 붓도색을 ..
안녕하세요 붓도색할때 그냥 사포질 안하고 바로 칠해도 괜찮나요? 그리고 붓도색하고 (유광) 마감제를 또 뿌려야할까요?
가능합니다^^
Curious to why you use lacquer thinner with the Mr. Hobby paint before applying?
I guess they are lacquer based and he wanted to get a thinner consistency for a smooth coat of paint
too dry
The paint was too dry and diluted.
@@ilsanninja Awesome! Thanks for the response. I really love the work you do. Keep up the good work bud!
mg 발바토스 뿔이좀 긴거 같은데 아무튼 기대중입니다.
라카 도료 붓도색은 방에서 하면 몸에 해롭죠?
프라모델 입문 한지 2주차인 초보입니당
먹선 진하게는 어떻게 넣는건가요?
검정 에나멜을 신너로 덜 희석해서 넣으면 됩니다
도대체 얼마나 연습하면 사장님처럼 락커도료로 저렇게 붓자국, 도료뭉침, 밑색비치는곳 없도록 도색할수있게 되는거죠?... ㅎㅎㅎ
자주해보시면 됩니다^^
Mg 바르바토스 오 완젼 기대합니다!!
락카 도료를 애나멜 신너랑 섞어서 사용하는건 안되는거죠??!
절대로 하시면 안되죠~
건담마커도색한붓세척은 뭘로해야하나요...??
락커신나 또는 알콜도 좋습니다^^
👍👍👍👍✌️✌️👏🏽👏🏽
저는 왜 항상 애나멜 골드로 워싱을하면 안지워질까요.
실버는 잘 지워지는데 꼭 골드가 조금 시간이 지나면 꼭 지워지지가 않는데... 원래 골드 애나멜이 그런건지요...
골드가 침전물이 좀 많아서 유독 그렇긴해요 그래서 가급적 완전 마르기전에 빨리 지우시는게 잘 지워집니다~
@@ilsanninja 친절한 답변 감사드립니다.
많이 흔들어야지 건담마커가 잘나오나요?
흔드는건 도료를 섞어주는 과정입니다~
선생님 혹시 메탈릭 도색 후 슈퍼클리어 무광으로 마감하면 어떻게 되나요?
광이 죽지않을까요?저도궁금한게있는데 마스킹테이프말고 그냥테이프써도 되나요?
광다 날아가서 비추드립니다;;; 메탈릭은 유광 아니면 그냥 마감 안하는것이 더 좋습니다^^ 유광마감도 변질되는경우가 많습니다~
@@ilsanninja 답변 감사드립니다 !
저 메탈릭 도료는 에나멜인가요 아크릴인가요?
락카입니다^^
BUNKER PLA 무허가 건프라 작업실 락카도료는 락카신너로 수정이 가능한가요?
제목이..?
You need add sub to your video, seriously..
광고가 너무 많네