How to Relocate Your Battery to Your Trunk
Вставка
- Опубліковано 12 вер 2016
- PREVIOUS VIDEO ▶︎ • How to Install Tieferl...
In this video, I relocate my battery from the engine bay, to the trunk of my car. There wasn’t really a kit that I liked, that would have large 0 gauge wire, and made it look nice, so I decided to get the parts myself. If you’re looking to buy what I used, scroll to the end of the description.
How to Relocate Your Battery (Part 1) ▶︎ THIS VIDEO
Battery Relocate Part 2 ▶︎ • Battery Relocate Part 2
Battery Relocate Part 3 ▶︎ • Battery Relocate Part 3
If you have any questions regarding the video, you know what to do. Thanks for watching!! :)
______________________________________________________________
Please give it a like 👍 and follow 👣
MILMAST MERCHANDISE ▶︎ www.cteecustoms.com/category/m...
milanmastracci UA-cam Channel ▶︎ / milanmastracci
milanmastracci Facebook Page ▶︎ / milanmastracci
milmast Instagram ▶︎ / milmast
______________________________________________________________
Videos in the Outro 🎥
How to Paint an Engine Cover (ANY COLOUR) ▶︎ • How to Paint your Engi...
How to Install a Skid Plate (EASY) ▶︎ • How to Install a Skid ...
______________________________________________________________
Products Used 🛠
Billet Aluminum Racing Optima Battery Tray ▶︎ amzn.to/2d77A6Z
25 feet 0 Gauge Wire in Black ▶︎ amzn.to/2dpxPXt
25 feet 0 Gauge Wire in Red ▶︎ amzn.to/2devq5y
0 Gauge Battery Terminal ▶︎ amzn.to/2cBfBno
0 Gauge Ring Terminal Connectors ▶︎ amzn.to/2dpxtAt
0 Gauge Connector Crimping Tool ▶︎ amzn.to/2cZwdUv - Авто та транспорт
Alot of people relocate the battery for weight distribution, it actually makes a big difference. If you remove a 40lb battery from the front driver side of the car, and move that 40lb battery to the rear passenger side, you now changed the weight balance by 80lb. You probably dont believe, like every comment on my battery relocation video, so let me explain.
If you have a 40lb in your, the front of the car (just for example) weights 500lb with the battery in it, and the rear weights 500 without the battery. 500+500=1000, the car weighs 1000 as of right now. Now you remove that 40lb battery from the front of the car, making it now weigh 460 lb, you now add the 40lb battery to the rear of the car of the car making it weigh 540lb. 460+540= 1000, the car still weighs 1000lb, but now there is an 80lb difference between the front and rear of the car.
Poor Man Mods but if there's 4 wheels and its front wheel drive isn't it just making the front 40lbs lighter and instead of pulling its dragging/pulling 40 extra lbs from the rear?
John y yea but that's a horrible thing to do in a fwd car
After you took out the battery, you can use the extra space to store your Mini.
I c wht u did ther lol
...
I was almost going to use 1/0 cca but never knew that cca wire used for car audio could cause fires,you always learn some valuable information..do your research people.
CCA that's used for car audio ? We use ofc only rookies use CCA
you've got ants in your car😂
7:00 🐜
get rid of those, that be a little weight reduction right there. That there be another 'How To, video'
love all your videos amazing job
As far as your full copper wire goes you can go to any welding supply store and get weld lead wires. They are full copper and have been used for higher performance stereo systems before stereo kits were a thing
Do NOT use self trappers for your ground wire.!!!!🤦🏻♂️🤦🏻♂️
why?
It will loosen up in no time
Please NO ONE use self tappers for your main ground.....Just because some kid does it on youtube does not make it right...
The ground should go straight from the battery to the engine right? and from the engine to the strut turret? I would never go straight to metal in the car with a rear mounted battery..
keep up the good work milan
شايفك يا سعودي انتا شكلك مثلي تحب الفك و التركيب 😉
great job , thanks for the info very helpful
Use a wire wheel to clear the paint around your ground then coat with dilithium grease. That would be the correct way
Another great video. I like to watch how you're doing your car better and better. And how you showing how to do thing simple and nicer. Good luck.
did you put a FUSE on the battery conector??? so in case you have short the fuse will protected the car cable from going to fire?
Isn't that built into most fuse boxes?
@@drumsterbaby you should put a MAIN FUSE between the battery to avoid a SHORT (potential fire) in case of some electrical short.
@@wwmilanl oh how exactly do you mean?
@@drumsterbaby you would want to mount a fuse on the positive terminal in the location that's close to the battery itself so that if the battery failed it will cut off the connection immediately instead of burning your car down until it reach the fuse box in the front of your car
@@zl_390 thank you! This should be more commonly known
Keep up the informative videos. Library of information if i ever need so. Thanks.
Glad you're liking them :)
that is so clean:)
I love the consistency of this channel, keep up the amazing work
Thanks buddy! :)
I'm new to this whole car modifying thing and I've got this question. what parts of cars are universally compatible if any?
So this is a how to if you already have a wire in the car to the back?
i c you touched on the positive cord at the end.
Nice Work
Your timing is impeccable my friend. was just thinking of doing this to make room.for a CAI. kind of cramped in the Hyundai. great food for thought when I get to it.
Glad to hear this is helpful for ya :)
I was just going to mention to make a video on exactly this project weird! I have the same car and had thought of doing the same thing! lol Great videos Sir!
Thanks buddy :)
Somehow i didn't get a notification in the sub box for this video. I saw part 2 and im like WHAT?? Luckily found part 1. Also funny because im literally doing this to my car as soon as a battery box comes in from amazon
WARNING!! I really hope you don't plan on using more of that plated CHEAP "zero gauge" wire... that is the stuff that causes car fires. Don't let the thickness fool you. Do research. Go full copper or go home.
How is it cheap zero gauge wire? There was nothing about it that is cheap.. Its full copper wiring
milanmastracci , you said it's full copper wiring but full copper wiring is never that flexible, and they usually don't have blue plastic or rubber coating. It's called 1/0 wire not zero gauge , but having a zero gauge CCA wire and zero gauge OFCA wire makes a huge difference. I would recommend to go homedepo or somewhere and pick up real copper 1/0 wire to relocate the battery. Don't use car audio wiring unless it's 2/0 OFCA wire or true 1/0 OFCA wire.
Looking at the video you are running CCA zero gauge wire. Copper clad aluminum wire. Not safe to use that wire. , and use a ANL fuse holder.
yes Oahu boy! I had a brain fart and couldn't remember what that wire was called. "CCA"
If you do go to a legit stereo shop they should have full copper wiring for stereos. Also Best Buy is now required to carry and install full copper wiring because of multiple car fires using the CCA wiring. They WILL NOT install anything unless full copper is used.
And Milanmastracci, sorry it's probably not "cheap" but its cheap compared to what Full copper wiring cost.
hey man you're videos are great and explained very well can you make a video on installing a subwoofer please?
Amazing
Cool video. I'm working on an oversize airbox and to do so I need to move the battery in the boot.
bro good job nikka good job
Question: How'd you connect your harness etc. to the battery after moving it?
hello, I really like your videos so keep it up ! I just wanna know if some day you can make a video about car choices..for example the best first cars..or the most reliable cars and stuff like that..once again you're doing a great job !
For sure buddy :)
Do you have any update about this? Like does it affect the way you start the car and how's the 0 gauge wire holding up?
very entertaining to watch your videos
Thanks bud :)
Quick question instead of connecting the wire to the old terminal is the anyway you can just run a new charge wire straight from the alternator to the trunk?
Can I connect the positive wire directly to the fuse box while I'm doing this? (If it's posible to do)
Low key hinting towards a turbo which is why the Golf is on a budget 😉
The golf is his brothers..
Very nice video only pain afterwards on doing this is getting the memory back like the radio, seat memory and etc lol
Meh. The couple minutes it takes to do that, I think its worth it
Like explanations to a person never seen a car before fantastic
AWESOME bro, keep up the good work!
Milan is literally the only reason I'm on UA-cam anymore.
Great video. But if I were doing this I'd put an inline fuse close to the battery, in case the cable shorts out and the car might go up in flames.
I second that, put a fuse in-line next to the battery! A big fire hazard if it shorts.
He's right you always put a fuse closest to the power source
Hey man. Do you have a video about how to wire a second battery into the car?
Yea I would love to see that video too!
Deal :)
Sweet! I wanna hook up a second battery to my accord. So let me know when it's released. :)
would love to see you relocate the fusebox too
Kevin Selagea buy a Yellow cap optima and you don't need a second battery. problem solved
So positive cable to original cable in engine bay ,then negative to chassis in trunk?
Great video and necessary to consider the poison gas leakage of the trunk battery? thank for help.
Hi Milan. Do you measured voltage drop in the extension cable (between the battery and the original plugs)? Or the resistance of the cable... It is significant? Thank you :)
I was wondering about this. That is a huge wire.
its a huge wire but it is definitely not proper and will cause over heating.. that wire is obviously coated and not full copper therefore don't do that.
How do you know its not fully copper? Because it is full copper. I made sure of that before I bought it
That's not full copper, full copper is never that flexible. And that's CCA wire. That's very bad wire to use
An 8 gauge real copper wire from homedepo is about as equivalent to that fake zero gauge wire that you are currently using
Literally one of the cleanest engine bays I've ever seen
Thanks man :)
Anytime!
I've been looking for turboed 97 corollas on UA-cam but I can't find any. Probably cause there is almost no space under the hood. So I was thinking of doing this mod and removing the windshield wiper tank to fit a turbo.
I'm seeing some comments here about safety hazards and the wrong wiring and such, so how has this held up over the years? still running the same setup as far as the wiring and tools used?
And what did you do with the oem ground terminal
I have near future plans to do this with My 2005 Ford focus ZX4
Did you not have to move the fuse box as well...? I’ve been hearing stuff about it you don’t then you will start blowing fuses and stuff. !!Plz Answer!!
not sure if you realize, but you had enough slack in the wiring harness that you should have been able to relocate to where you wanted without getting new wire. If not quite enough, you could separate the main from the wiring harness, which you would want to do anyway especially if you put a fuse block on there. Just a thought.
how about a car with edlc module ?
i got a Honda Vezel,the Edlc module located on my trunk,and it stopped working about a month ago
which the edlc module is for auto shutdown the engine when the car was fully brake.
please help me millan
Do a video on how to wire a 4 channel amp and speakers please
Hey im about to relocate my battery because it sits above the passenger tire. Im going to run it to the trunk, is everything still good? Is the 0 size wire still holding up and does the car still run and start the same please respond i just wanna make sure i do it right and will it breath good and not blow up? I have a 1 yr old and i just wanna make sure because of right now cant drive in the rain and my weather protector is thrashed. Lemme no. Good video btw
I've got a Dodge avenger...the battery is located in the wheel well of the car (a brain - wise idea from dodge!!) And I'm thinking about moving it to the trunk as well!! Although you have to struggle with your STEREO system, I'm not... All I'd have to do is run a 0 AWG WIRE from the engine department of o the trunk where I'd replace the battery.
What did you do with the original ground from the battery, you did not cover that?
Can I put two batteries in the trunk ( the battery from the front with another ) and will my alternator charge them ?
I drive a 2002 chevy prism.
You sure can!
You should do a video on how to install subwoofers
good tutorial! Now don't forget to record and post the video with the car in flames! :D
What are the benefits to you from this?
How much diameter of the positive wire?
Do you connect the near negative wire of the engine in the car body?
I'm trying this with jumper cables and my car can't crank over it tried but otherwise the cables just arnt working. I don't know if it's because the cables arnt suppling the power or what
Just curious why you said you were going to move it further back and pointed the camera to the driver corner of the trunk and not to the passenger side for better weight distribution as that's the main reason to relocate it in the first place
when are you gonna change the transmission with your friend?
shard and liked ur video
shard
Bro it's a typo, you want a cookie?
Hi brother is it safe back there in the trunk?
I have what I believe is a fuse on my negative cord that's wired to the car computer. what do I do with that? the cars reading it?, and will think something wrong?
last time I was this early the golf was blue
Very good editing and presentation...keep it up!
What about the emission of H2? Could this be potentially dangerous?
Cameron Stark what is his trunk gonna blow up?
Hey can you make video about how to change power steering fluid on your Honda thanks
Like how to change/flush it? :)
Yea flush or change
This would seem very...suspicious if you ever had a car search lol.
Umm... because race car ;)
Did you remove the heat shield under your hood? It looks really clean and all but I've read on some articles that it will shorten the life of your paint
Colton Sailor it can if your engine is running too hot
So much room for a turbo!
in my case i got into an accident and im gonna move it to the back seat lol
So what do u actually need for the positive side i got a little confused so u have the long 0 gauge wire pretty much?
asakapa0003 The long 0 gauge, something to tap,it to the wire that was originally connected to your cars positive wire, then something to connect the extended 0 gauge wire to the batteries positive terminal
and a negative ground
so you dont really need a long negative cable? since its going to be grounded right there.
Can you do one on how to underseal your car?
Did you mean " rust proof the undercarriage"?
If you know what your doing, you can buy rust proof in a spray can, all you need is to wash it down, primer, then rust proof coat. But I get it done by a shop, because I get a warranty.
Thanks bra...
While you're there can you show me how to adjust the headlights
In an update video he said he used that space to add a second battery for the sounds
It would good for 2013 Chrysler 200 to move the battery into the trunk. Hate to take the wheel off just to change the battery.
Can I simply change the car from petrol to water fuel AKA HHO fully?
Does it need parts, massive change and work or is it simple?
Just asking for future projects.
You're joking, right?
No problem, but make sure to check the foglights. they will need more maintenance. and if you're exhaust turns green, it means that you should change your passenger seat in the next 3 weeks. and never but I mean NEVER drive the vehicle and look three times to your right. this will set the engine to block full out and you can have a accident. other than that, good luck bro. I already did 34,7 of these conversions and I'm happy with the results!
+luckym0nk3y As a certified mechanic, I can confirm all this.
I liked all your comments as if someone asked me 1 yr ago I would've respond the same. Actually it is possible as the hydrogen gas in the water burn more efficient than gasoline and with 0 carbon emissions, can I ask you guys just to take a few minutes of your time and go search ( cars running on water/ HHO) as I wouldn't believe it until I saw some attempts. TBH most of them are inefficient and look ugly, but there are some who surprised me but the have no tutorial for it. That's why I'm looking for a way. For that sarcastic guy 😂 I love your joke showed my friends and they are laughing on the floor 😂😂😂 thanks 😉
who is the sarcastic guy :p
The ending though
Leanne is looking super fine are you using her as a daily ?
Sure am :)
Couple of issues with this instructional... (1) You should put a fuse on the wire running from the alternator to the rear of the car. (2) Please, do no use self tap screws to make a ground connection. Drill and use a nut and bolt.
Can I weld a threaded bolt to the car?
Wait so can you show how you connected the positive wire to the 0 gauge in the engine bay
he probably didn't want to show it yet b/c he was not ready and "wants to do something better" there with the harness. The car would be driveable if he just bolted in the blue wire into the original connector, but it would just dangle there some, I imagine. Really, the video is not of a complete project...
Make sure that car audio 0 gauge wire is OFCA wire. Don't use CCA wire. CCA wire isn't as conductive and running that length of wire can almost drop your voltage by 1volt. And the amperage can drop by a lot and may affect your cranking Amps
Trying to help... I'm an audio enthusiast. I know a lot about wiring.. And thoes people are right, the wire will heat up in the long run and cause a fire. That 1/0 wire is cheap CCA wire. They are not good conductors and you will loose a lot of cranking amps. Use either real copper 1/0 from homedepo or something or use real true 1/0 OFCA wire. Check out GP car audio as they only sell OFCA wiring.
milan if your gonna make the mini a track car will you do an ac delete
Stay tuned. We are going to make that mini something else. So yes, an ac delete is a very small part of that :D
MrKylev35 who da fuq are you
Behind the scenes ginger fuck that you occasionally see. The Spielberg quality camera work in the bloopers is done by yours truly lol
dear friend,
I like your video..I have one question? I have a toyota sienna I tried to change the dashboard bulb lights after I done my car is not start ..crank won't start what had happened?
and also some light won't on at all..
thanks..
hope to hear from I..
Maybe you have a blown fuse who was important. Check your fuse box and your connections ;)
Did you kill your battery?
How to tuck your positve battery wire on the engine bay?🤔
How to relocate the battery in the Dodge Journey to inside the bonnet
Should invest in a head or chest mounted GoPro. 👌🏻
Benefits of adding 0 gauge wire versus smaller gauge wire?
If its still useful after 5 years, the 0 gauge allows for minimal power loss over the extra distance
is it safe??
did you paint your wiper arms?
A while back so I could cover up the oxidizing aluminum
i knew it! i did mine and look exactly like that! loving the videos, man. Cheers from Mexico!
In English English, we would say 'over the top' in Canadian English, the phrase seems to be 'over top' annoying as a Brit watching this lol!
@milanmastracci How did you get all this knowledge on cars?
It something called experience, and a alot of the internet.
2 ways to relocate a battery, your installation, and the correct way to do it.
How have you opened the hood of the car so much?
I don't understand?
At 10:07 the hood looks perpendicular to the car
why you removed the negative pole first?
always remove negative first
jumper cables will burn. it gets hot when trying to crank the car
Sacrificing trunk space for engine bay space!
YESSSSS!!!
Most common reason is better weight distribution