Thanks for explaining everything for the people that DOES appreciate the time you took to do so and for adding the humor. Lol…good video. Oh and love that truck Bro.
Thank you! I bought it to apply some products to my new/used 5th wheel. I’ve been to several UA-cam channels to learn how to use the Tool Daily Foam Cannon. You gave thorough, detailed instructions on how to do so. Whereas the others did not. Very helpful. Much appreciated Justin. 😊
Wow what a great video!!! You taught me all I needed to know about how to use a foam cannon. and I’m loving that shorty pressure washer wand. Please please put out more videos. You’re a great detailing teacher!
Thanks for taking the time to do this... a lot of valuable tips that were unknown to me, such as the "fan spray" adjustment and not putting the soap on too soon after water spray down... didn't think of that! The directions don't really detail that. Good stuff and exactly what I was searching for in order to use it correctly. =)
Great Vid - Quick Question... I may have missed something in the video. I just today received my setup and the high pressure hose in the SUNJOE Model SPX3000 doesn't fit the Stubby Washer Wand. Looks like the fitting at the base of the (Model: Dusichin DUS-220) has an Inside Diameter that's just a little too small to receive the Pressure Washer Hose. Suggestion or Link to correct fitting? Thank so much. UPDATE: The Hose Spec says: "M22 (in)". The Stubby Wand Spec says: "M22, Metric Male, 14mm Inside Diameter". - I'm guessing fitting in Stubby Wand has to change. But to what? Has someone got a link to the correct fitting? Thank you.
Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use ua-cam.com/users/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.
this video help me understand that the foam cannon needed a pressure washer & stubby wand handle i got the cannon and thought a garden hose was all i needed - oh well , youtube to the rescue again - Thanks for the education
Gotta love a good foam cannon. Honestly you know detailing, your subscribers could benefit from your knowledge with so many bad YT detailers and products on the market now.
Where did u get the pressure washer hose from? I just bought a pressure washer and I don’t like the hose that came with it. Looks like the one u have is rubber!
As with any concentrate,as well as lawn chemicals such as weed control chemicals, unless it sais specifically ready 2 use..but most concentrate soaps there is a ratio per gallon or Oz. Should be listed on the product description..
My Harbor Freight electric pressure washer has a problem. It only has a screw on connector on the pressure washer end of the hose. The other end that connects to the long wand handle just slides into the handle and clicks in place. There is no screw on thingie to connect it to the stubby handle. There must be some sort of adapter I need to buy if I only knew what it was and the name.
@@ChandlerBrentLane I found another UA-cam video where the guy showed the new hose and adapter he used to make it attach to his Dusichin short handle. The hose was a nice no kink type but he needed that adapter to change the size from 15mm to 14mm to fit onto the HF Portland electric pressure washer. He provided links to Amazon and I fired off my order right away. Should be here Saturday. Ya know, it might be handy if you posted another comment in this section and add the links to the new hose and quick connects that you used. It might help out some other readers. I think I'll do the same with my combination.
I wanna see your full detailing video man. Like after you foam the car then wash. I wonder what you dry with or u add any wax after lol Too much asking lmaoo
Is it normal to have this runny foam? I got the same one before watching your video, and had same runny foam. It's my first foam cannon so I don't know, but when I watch other videos they seem to have much less runny foam.
Got mine in but no foam I used purple power concentrate soap my guess didn't use enough.3oz idk but after researching probably the choice of soap I went with,there are specific soaps with the added sudds to create that phoam we are looking 4..just on my end I guess, il try another soap, but thanks 4 the video help me determine if the product was worth the $
So did I - Just got my set up. Did you have problems connecting the pressure washer's hose to the stubby wand? The male part of the Hose End is not fitting into the female fitting at bottom of Studdy Wand. The Hose says: "M22 (in)"; whereas the Stubby Wand says: "M22, Metric Male, 14mm Inside Diameter". What's the fix? Thanks.
Think about the environment. Man, you're still young enough to experience all the environmental disasters that await us! Before you make your shit polluter and gas guzzler with all the chemicals and soap clean, you should think about it.
Thanks for explaining everything for the people that DOES appreciate the time you took to do so and for adding the humor. Lol…good video. Oh and love that truck Bro.
Thanks for watching !!
Thank you! I bought it to apply some products to my new/used 5th wheel. I’ve been to several UA-cam channels to learn how to use the Tool Daily Foam Cannon. You gave thorough, detailed instructions on how to do so. Whereas the others did not. Very helpful. Much appreciated Justin. 😊
I just watched a 12 min video only to have you fast forward thru the actual use of the product your peddling.
I’m glad I seen your comment before I watch
Wow what a great video!!! You taught me all I needed to know about how to use a foam cannon. and I’m loving that shorty pressure washer wand. Please please put out more videos. You’re a great detailing teacher!
Thank you for watching!!
@@JUSTINHAWKSMITH so you don't wash with your hand, you can just rinse the soap and it will clean
I’m not a fan of jacked vehicles, but the combination you have there is sharp as hell, and In 73 years old. Nice job!!!!!!
Fast forward to 9:30 if you want to see the foam cannon actually doing something… you’re welcome
Thank you !
"Fast forward to 9:30 if you want to miss the setup, useful tips, and features of this foam cannon"
Already bought one of these but never used it. Excellent video and I love the truck.
Thanks for taking the time to do this... a lot of valuable tips that were unknown to me, such as the "fan spray" adjustment and not putting the soap on too soon after water spray down... didn't think of that! The directions don't really detail that. Good stuff and exactly what I was searching for in order to use it correctly. =)
Thank you for watching glad I could help somewhat!!
Great Vid - Quick Question... I may have missed something in the video. I just today received my setup and the high pressure hose in the SUNJOE Model SPX3000 doesn't fit the Stubby Washer Wand. Looks like the fitting at the base of the (Model: Dusichin DUS-220) has an Inside Diameter that's just a little too small to receive the Pressure Washer Hose. Suggestion or Link to correct fitting? Thank so much. UPDATE: The Hose Spec says: "M22 (in)". The Stubby Wand Spec says: "M22, Metric Male, 14mm Inside Diameter". - I'm guessing fitting in Stubby Wand has to change. But to what? Has someone got a link to the correct fitting? Thank you.
WoW ! This guy knows how to do a great video. Nothing bu good , useful and practical information !
Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use ua-cam.com/users/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.
this video help me understand that the foam cannon needed a pressure washer & stubby wand handle
i got the cannon and thought a garden hose was all i needed - oh well , youtube to the rescue again - Thanks for the education
Nice
But do you have to buy a “wand” and not just attach to the pressure washer hose/quick link
I have a quick question about the pressure hose set up you got, what did you buy to make it a quick release
This guy earned his thumbs up.
When you going to get some tires for that truck?
What happens if you mix the soap with bleach in the cannon? Would it still foam?
Gotta love a good foam cannon. Honestly you know detailing, your subscribers could benefit from your knowledge with so many bad YT detailers and products on the market now.
Appreciate that, I will try to make more detailing videos man. Thanks for watching
Very descriptive yet short thanks
How do you make the soap spread up and down on mine it throws a b inch of foam like a water hose
I’ve used abs abused this cannon for months and it’s never given me a problem
You think it would work a lot better if you replace the orifice?
It would make a slight difference, but not a huge difference
Any tips on how to get the foam cannon to fan spray? I have this cannon and it sprays like a jet stream. I have adjusted the knob every possible way
The two little silver flat things need to be like pretty close together I think you twist the red part I can’t remember
Excellent video!
Your stubby wand link is no good anymore. Would you recommend the stubby wand that comes with the tool daily foam cannon for 35.99?
amzn.to/33YSuQx LINK UPDATED! THX FOR WATCHING
Can the cannon be used without a pressure washer? In other words, can a garden hose connected to a hose bib be used instead of the pressure washer?
I don’t think so , it wouldn’t have enough pressure behind it to mix the soap and water but they do make special ones just for water hose use
Where did u get the mini gun to use with your cannon
On Amazon here’s a link to one that comes with a great foam cannon, hard to beat ! amzn.to/3Awwmtl
@@JUSTINHAWKSMITH thx 👌
I have a 4500 PSI pressure washer. Is this recommended for that?
I would say that has too much PSI
Where did u get the pressure washer hose from? I just bought a pressure washer and I don’t like the hose that came with it. Looks like the one u have is rubber!
Wow totally didn’t know you have to dilute the CG soap!! Can’t wait till get the foam gun! Thank you!
As with any concentrate,as well as lawn chemicals such as weed control chemicals, unless it sais specifically ready 2 use..but most concentrate soaps there is a ratio per gallon or Oz. Should be listed on the product description..
Great video good information sweet truck
Where's the link for a step ladder?
Nice truck!
Thanks !
Your truck looks like an absolute nightmare to wash!
Change orifice in this foam cannon to 1.1mm, the result will be much better
How do I do that
@@JUSTINHAWKSMITH ua-cam.com/video/KUfU8-kjpyk/v-deo.html
I changed mine and it isn't any better. Maybe worse.
I have the exact same cannon
But I have a electric 1800 psi washer and no where near the same results mine sucks too runny
Try a different soap or more soap. 1800 psi should be plenty
I just got the same foam cannon from amazon do i need the wand? or is it something you would recommend getting?
Looking rather runny to me ! Probably operator error. Might want to do trial video first.
My Harbor Freight electric pressure washer has a problem. It only has a screw on connector on the pressure washer end of the hose. The other end that connects to the long wand handle just slides into the handle and clicks in place. There is no screw on thingie to connect it to the stubby handle. There must be some sort of adapter I need to buy if I only knew what it was and the name.
I have the same pressure washer you are talking about. I bought a new hose & wand with quick connects.
@@ChandlerBrentLane I found another UA-cam video where the guy showed the new hose and adapter he used to make it attach to his Dusichin short handle. The hose was a nice no kink type but he needed that adapter to change the size from 15mm to 14mm to fit onto the HF Portland electric pressure washer. He provided links to Amazon and I fired off my order right away. Should be here Saturday. Ya know, it might be handy if you posted another comment in this section and add the links to the new hose and quick connects that you used. It might help out some other readers. I think I'll do the same with my combination.
Great video, thank you very much.
Thanks for watching!!
Great instructive video. Thank you!
One of the best explained, coolest vids to watch. Awesome job 👏
Nice Truck but Turtle ice snow foam & Torque foam wash is a whole lot better.
Do you have to have the pressure washer? Or will the one at house will work?
You have to have a pressure washer.
Bad thing is because you can use them only with kracher you can't use with garden hose
Great vid. Great info. Thanks for posting.
I wanna see your full detailing video man. Like after you foam the car then wash. I wonder what you dry with or u add any wax after lol Too much asking lmaoo
Husband loves it!!
I have the same one and when I used it, it just came out like water? Is the hose in the box needed to make foam?
Yea man you have to put the hose on the bottom of the foam cannon so the hose goes into the bottle
Is this foam cannon better then matcc?
What’s the reasoning in the bucket?
Adds quick connect for hose and not one for the pressure washer gun...
Silly me.
@@JUSTINHAWKSMITH great vid though, keep up the great work!
@justin where’s the wand the link doesn’t work anymore
amzn.to/33YSuQx
Is it normal to have this runny foam? I got the same one before watching your video, and had same runny foam. It's my first foam cannon so I don't know, but when I watch other videos they seem to have much less runny foam.
Add more soap
@@JUSTINHAWKSMITH thanks! will try
@@yuegan1939 was the foam thick or still runny after you added soap
A 1.1mm orfice will also help.
Turn the nozzle at the front tip of the foam cannon
That’s an ugly ass truck 😂😂😂
7:54 was that was mitt on the ground 😟!!!
Busted !
lol
THAT MITT IS ACTUALLY ON THE BUCKETS LID !!! lol
Got to get one of these.
Hello@
JUSTINHAWKSMITH, would you like to review the new MJJC foam cannon pro? Thank you.
Sure , I’m down!
@@JUSTINHAWKSMITH Hello, will you make a review video for the product? If so, may i send you an email first?
@@MJJCvideo yes i will , feel free to email me!
@@JUSTINHAWKSMITH Yes, i just sent an email to you, please kindly check it out. Thank you.
Nicely done. 😎👍
I got that foam cannon, i love it
Thanks for watching!!!
Thx man! Actually bought it and was looking for tips on using, found your video and…appreciate man! Good looking ride buddy!
Awesome man thanks for watching!!!
That is one killer truck!!
Excellent!
Good show mate
FBI watching u lol
If it has brass connectors, it isnt good
Seems the cheap Amazon product is a go,doing its purpose and comes with extra tips that's a great deal
Got mine in but no foam I used purple power concentrate soap my guess didn't use enough.3oz idk but after researching probably the choice of soap I went with,there are specific soaps with the added sudds to create that phoam we are looking 4..just on my end I guess, il try another soap, but thanks 4 the video help me determine if the product was worth the $
You should do more detailing videos
Sounds good brother I will sure try to
Nice truck bro
gotta get myself one
Absolutley man use the link in the description helps support the channel!
Thank you friend. Now I know what I need and how to use it.
God bless you abundantly in the name of Jesus, amen.
Now you know you used a different pressure washer than the one you listed.
The only reason I liked this video was because of that Olympic inhale of the soap!! #gold
Ohhhhhh yess
Awesome video
BTW just because I saw this video I bought all of it.🤜🤛
So did I - Just got my set up. Did you have problems connecting the pressure washer's hose to the stubby wand? The male part of the Hose End is not fitting into the female fitting at bottom of Studdy Wand. The Hose says: "M22 (in)"; whereas the Stubby Wand says: "M22, Metric Male, 14mm Inside Diameter". What's the fix? Thanks.
It's a pressure washer gun, not wand. The "long stick thingy" is the wand.
Forreal ?
Longest ad I’ve ever watched
thats just a watery mess, think you need to adjust your ratios
Have you tried changing out the orifice to a 1.1? Instead of adding more soap which ends up costing you more.
I have not. I’ll have to try that this spring!
What’s this 1.1 orifice you are talking about?
I think that the 1.1 mm orifice is designed for 1,000-2,500 psi
@@georgemyers6518 they definitely help them but I've seen them on washers up to 3300 psi
I’ll definitely give that a try on my gas powered pressure washer in the spring.
I’m always up for more performance
nice
Not the cheapest there is a 12 dollar one that is cheaper jwgjw foam cannon is the cheapest on Amazon but great video keep it up man
This was cheapest at time video was made (including taxes & shipping)
Thanks for watching
Let thet werm uuuup lol
🏆🏆🏆👍🇺🇲🙏
SUBSCRIBED
Thank you for sharing
Thank you!!
1.1 orifice ? ?????
People get carried away with washing cars!
Think I found why I was not getting any foam, mine did not come with a hose that goes in the bottle.
Hahahahaha
Hahahahah oh yeah jajajaja
I wish i was a spoilt rich kid.
6 mins in the video and you ONLY LINKING products. i bet you make money like that. but toooo much.
Yeah I do make money using Amazon affiliate links. But not enough compared to how much effort I put into my videos. Definitley not “toooo much”.
Think about the environment. Man, you're still young enough to experience all the environmental disasters that await us! Before you make your shit polluter and gas guzzler with all the chemicals and soap clean, you should think about it.
ooooo okay got it