Automatic thread cutter problem and repair!
Вставка
- Опубліковано 29 вер 2024
- How to fix an automatic thread cutter problem on a modern sewing machine.
Change thread cutter knife.
The video shows a Husqvarna Viking Opal 690 Q but Pfaff Quilt Expression 4.2 looks the same.
Hur man lagar den automatiska trådklippningen på en modern symaskin. I detta fall en Husqvarna viking Opal 690. Videon visar hur man lätt själv kan reparera symaskinen när trådklipp krånglar.
I have a Juki f600 and it gets caught and I have to unscrew and take off plate and pull out thread . I put a new blade from a box cutter like you did it’s cuts better but not completely I’m going to replace and put in fuzzy thing that is not there and the blade holder and hopefully it’s works like new it seems like the thread is to long but might be better after I fix this. Thank you so much for your video to help me on my way to repair this problem. You are the 1st I’ve seen do this.
Brilliant 👌
My machine have the same problem. It only cut the thread when I sew thick fabrics.
I tried your tip out, but it does'nt work. So I put the original knife in again and I can't belive it, now it works!!!!
My cutter only cuts one thread. I have replaced the blade and it still cuts only one thread. What about the little piece of Velcro?
Thank you so much! I ordered my replacement knife before watching this video, could have saved 4 dollars! Your instruction is so easy to follow and I was able to replace it 5 minutes ago by myself. I thought I would have to ask Hubby to help. He helped me with the threader last year. Now my machine works like new. It was so annoying when I had to cut the thread by hand for a week. THANKS!
Any suggestions for when the slider is stuck in the "out" position and cannot be manually pushed back to it's starting position ? (Viking Opal 650)
Exact same for Pfaff Quilt Expression 4.0, 4.2, and Pfaff Performance 5.0, 5.2. Also the Viking Sapphire 900 series. A lot cheaper than the Viking/Pfaff part! I bought an Olfa (really good quality-sharp) 9mm knife on Amazon for $8 and keep it with my Pfaff Quilt Expression 4.0 so that I can change the blade once or twice a year, depending on how much I'm sewing. Really improved the reliability of the thread cutter! Thank you for the video! 😃
Thank You, the tread cutter of my machine was fallen off, thanks to this instruction i was able to fix it again.
mats I cleaned my machine first and that didn't work. Then I ordered a new blade and replaced it. It only worked ONE time. Seems to me the arm might be a bit too high and not able to grab the thread? any ideas for this problem? thanks.
I had this problem. I changed the blade, not fixed. It ended up I had a ball of fuzz in the area that was stopping the blade from being used.
thanks so much.... just what I needed :-) Did it on my Pfaff Performance 5.2
GENIUS thank you!!!
Thank you for sharing this info. It works beautifully now
Thank you SO MUCH! You saved me a trip to the Viking repair!
Thanks it worked for me on my Husqvarna Viking diamond. Do you also have a good fix for when the needle threader gets off of adjustment?
Thank you very much...saved the day. Joyce is busy making Christmas gifts and the dang machine broke down...you fixed it Yeah!
Oh my god. For Pfaff quilt expression 720 too! Thanks. Any video for dismantle upper plastic cover to lubricate and cleaning inside mechanism?
Since the pandemic everyone has been trying to get their machines repaired. I found out that my cutter was the problem on both of my machines and since I can't get either machine in until October, yes October, I took the advice of a good friend and googled the issue. Your fix was perfect. I cleaned out the fuzz and replaced the cutter. My machine jump stitch cutters are back in working order and I'm a happy camper stitching again! Thanks!
Saved me a repair bill. Thank you.
Thanks for the awesome video. It helped my on my Pratt when my cutter piece came out while cleaning.
Thank you! You just saved my sewing project!
Whaaaat!!!! I sure hope this fixes my problem! Thanks!
This doesn't solve the Janome Skyline s7 cutting problem
Thank you!! Now I can get back to work.....
Thank you, my friend. !!!!
I am in shock
This video is no good for a Singer Quantum Stylist. :( Don't know why this video keeps popping up when I type in Google thread cutter problem
DJ Shanas did you figure out how to fix the thread cutter on singer quantum stylist?
@@samanthabosworth5482 looking for the same thing here 😔
Marla Shanas I know this is from a long time ago, but let me know if you found a solution!
@@sandrahartline8036 Me too! Mine is under warranty but in order to get it fixed I have to ship it to NC or NJ as there is no warranty repair shop in my area... ugh
Here's one specifically for the Singer QS 9960. ua-cam.com/video/Z6cRnNr079s/v-deo.html
Thx 🙏 Pfaff = Husqvarna
ill try it as soon as i find out what a snap off blade is. hope lowes or home depot know, if they arent on lockdown.
thank you so much for sharing info w us.😚
It's a also known as a box cutter
Fantastic! Thank you so much!
Thank you so much !!
Thank you soo much! Just replace the blade on my Brother SE600 and it worked out perfectly 🤗
I have a Pfaff (something) 5.0 and it looks exactly inside, so I fixed my machine. Thank you ´!!
I also thank you!! Your video was just what I needed to fix the thread cutter on my Viking Sapphire 930. Saved me the $49.99 service fee! And Amazon got me the 9mm blades in one day!!
Could you post the link of the amazon website please. I’m struggling to find it
I have pfaff expression 710. thank you so much. Now I won't have to ever compromise using a dull cutter because I can change it myself on demand.
:) Thank you!!!
Amazing video, thanks A LOT! My wife just got a second hand Tribute 145C and the cutter was only doing its job less than half of the time. She was gutted (me as well) and we were already planning to bring it to a shop for maintenance. Took me less than 2 minutes to change the blade and now it seems to be working perfectly again. :)
Thank you! Used this on my Brilliance 75Q that has not been cutting for awhile and fixed the problem!
Mats, I have a Designer one. Could you tell me why it squeaks when I use the reverse button?
Thank you, your brilliant video saved my day! Had a thread jam, when released couldn't pick up the bobbin thread cleanly and didn't realise the cutting arm/lever was misaligned till I watched your vid.
Thank you. Replaced the blade just as you showed in the video. Cost me one dollar to fix and I still have extra blade. Thank you for sharing.
Perfect video. It worked for my Husqvarna Viking Opal 670. Thank you!
Thank you!!!!!
BTW, my machine is the Sapphire 930, but I’m sure the scissors mechanism is the same.
Just took my machine in for cleaning for this exact problem! Thanks for this tutorial...I will buy an extra blade to have on hand for next time I have this issue.
I dropped the little siver screw in machine I don't hear it rattling around . Tried shaking it upside down and nothing any ideals and what size screw for the cutter does it take
Whoa! Awesome. I have the Brother Dream Machine 2 and the thread cutter is hit or miss. I wonder if this is why? Will this same procedure work on my machine?
Thank YOU!! Worked great on my Ruby!!
Thank you! I have owned 3 Husqvarna Machine and this has been a problem which each one. Great Video!!
What is wrong if my cutter is cutting my top thread when I am trying to lift bottom thread up?
Thread cutting problems can also be from using wrong bobbin.
this video is about a 200 dollar savings for me thanks alot
Thanks for sharing looking at a Designer SE that the thread cutter is not working on.
Great video, thanks. Can you make a video on what to do when the cutter is cutting the bobbin thread too short?
Grazie mille.per questo video.mi avete salvata.
i might have dropped my knife in the machine, any tips on how to take apart?
mine cuts the top thread but not the bottom thread on my babylock ellure
Looks easy. Thank you. I will try it.❤
What a life saver your simple video was for me!
The blade isn’t my problem. It cuts once. The second time it makes a big bang and the upper thread breaks off about 8 inches long. Yes, this thread now is all in the cutter area. After cleaning it out, rethreading my machine and trying again to sew, it might cut properly the first time, but by the second time it clangs and bangs and cut the upper thread again about 8” long. Never had that happen before, but now unable to sew😫😫
My machine is doing the same. I just replaced the blade and that wasn't it. I cleaned the area before I ordered the blade so that wasn't it either. :(
thanks, dear all the way you deserve it
Hi there .... does this work on a designer 1 ???
You have beautiful hands.
Thank You. Can't wait to try this.
you are a master! thanks
Please show close up how to put the piece back into the machine. I replaced the blade as you showed. But can’t get the piece back in. Thank you.
Please look at 2.25 in the film.
Thank you so much !
Great video
good video, music is too loud and sucks
Thank you
Thank you
J
Hey I have a brother se625 and when I press the cutting botton the bottom tread stays inside the machine, is this normal or do I gotta get the bottom tread up everytime?
Yes! I have the same machine. You do not have to "thread" the bobbin thread up. It is an auto thread machine - 👏👏👏! Does it every time. That is one of the best things about that machine.
I will add that it is important that you hold your finger on the bobbin and pull the thread snuggly when you wrap the it around the little track as shown in the picture on your machine, and then break it off on the little cutter at the end of the track before putting the plastic cover back on. I think this locks the thread/bobbin in. Otherwise, you will get really loose, knotted bottom stitches.
I have the same machine. My thread cutter must be dull because it’s doing the same thing as the one in this video