How to Fix Warning Messages on 2019+ Ford Ranger
Вставка
- Опубліковано 31 бер 2022
- This video shows how to eliminate the Pre-Collision Assist Not Available and Front Camera Fault warning messages. Also, just to note I do not have adaptive cruise control so there was no radar in the front to be obstructed by the new bumper. Hope this helps anyone having this issue. Drop any comments or questions below. Thanks for watching.
- Фільми й анімація
New 2021 raptor (asia), need to fix. If i go out of the car with the engine running while the key is my pocket. It’s honk twice 😒 so annoying.
Thanks My Friend
ah the velocity blue is pretty cool but I love the lightning blue I got on my 19
My 2018 Mustang was lightning blue. I actually tried to buy a lightning blue ranger and the dealership sold it out from under me and there weren’t many 2020’s left when I went to buy so I ended up with velocity blue.
@@xerowerx Well I was pretty lucky and got it for 10k off in November of 19 before this pandemic made everything too expensive.
Good information thank you
You’re welcome!
Very sweet ride I’d like to see where you put the switch for the ditch lights i will be installing a set on my ranger but don’t know where to put it
Sorry for the delayed response I don’t remember seeing a notification for this question. I bought one of the 8 gang light switches off Amazon and installed it on the roof to the plastic housing where the map lights are.
I have the same shackle hooks up front are yours from rhino
@@paulpeters5199 I got them off Amazon, I don’t remember what brand. I don’t have that truck anymore.
great video!! Can you provide info on your ditch lights? In particular the brackets that hold two lights.
Thank you! The brackets are diode dynamics ditch light brackets with ZROADZ dual A-pod pillar bracket bolt to the diode brackets to allow 2 per side.
Dig the truck dude. Video came up in my recommended because I have my 2022 on order and am passing the time with mod videos. What front bumper are you running?
Thank you! I’m running the Barricade HD Off-Road bumpers.
Are those headlights Alpharex matrix
Sorry for the delayed response, don’t remember seeing a notification for this question but they were the Morimoto XB headlights.
Hi i have tried what you did but I ipma but i don't get the options you had im only getting as built format
You might be in the wrong section then, I’m not sure without seeing it
I was really hopeful this fix would work for me, but it didn't. I was recently in FORScan adjusting the mm circumference of my larger tires and decided to make a few more tweaks. I stopped in at each tab to take a look around and spent some time studying the options available. Unfortunately, I do not specifically recall what I may have tweaked beyond that, but now I have a persistent "Pre-Collision Assistant Not Available" error that routinely appears and can only be cleared with the steering wheel "OK" button. I've repeatedly gone back into the FORScan program and tried making multiple adjustments, then removing them to try to isolate the culprit, but have been completely unsuccessful. The error only arrived since my poking around in the program and has nothing to do with an obstructed sensor.
I've read countless other Pre-Collision posts on FORScan and the Ranger Forums and NONE of them apply to my specific situation, but still searching..
I think there is a way you’re able to pull up the original scan of the vehicle and put everything back to the way it was before you changed anything and then just change your tire size and leave everything else alone if you want.
did you have a adaptive cruise control issue as well? I’m on an RC 6” lift and it bugs me that my pre collision and adaptive cruise control doesn’t work.
I didn’t have adaptive cruise on mine but try the procedure and if it doesn’t fix the adaptive cruise look in Forscan and there may be a recalibration procedure for adaptive cruise.
@@xerowerx I believe that’s my issue
Are you running a differential drop on the front with that much lift? Have you noticed any issues with the CV boots wearing because they rub against each other? Love the suspension you're running.
I am running the eBay front differential drop kit. No cv issues for me and my truck has the weaker cv axles from factory, not the better ones.
@@xerowerx Thank you for that info! Much appreciated.
@@xerowerx how do you know which ones are the good ones? I’m new to rangers so any info helps.
@@alanwright782 honestly any of them will work. I used the one that came with passenger side & driver side brackets.
@@xerowerx sorry, I was talking about the CV axles.
Where did you get your hood mounts for your lights plz
I got them from Diode Dynamics.
That’s with the duel mounts?
@@MegaVejay no, sorry the dual mount is from zroadz bolted to the diode dynamics brackets.