Here is a step-by-step list of instructions for this model year from CarAndTruckRemotes.com (not a sponsor): blog.carandtruckremotes.com/2015/11/05/2009-2010-2011-2012-and-2013-toyota-corolla-free-programming-instructions-for-remote-head-key-keyless-entry-remote-fob-alarm/
Ugh, it usually isn't a matter of encryption length. If your original key won't start it, and you have no spare, you may have to go to a dealer or locksmith to program a new master key, and for that you typically have to have the manufacturer master four-digit PIN that was assigned to the vehicle when it was manufactured. That normally comes on a small rectangular plate with all the original sale paperwork or is taped to the original manuals. It frequently gets lost., or the selling dealer conveniently "forgets" to give it to the original buyers this forcing the to the dealer if all keys are lost. You can erase all keys from the immobilizer with some tools, but you typically cannot program a new *initial* (first) key without the PIN. I suppose if you have no way of starting the car right now you have nothing to lose by trying, but understand the risks if you go in to the IMMO menu, find an option to erase all keys, then cannot (for some or any reason) program a new one.
This worked on my 2016 corolla. My key and spare were not working. I assumed the battery died so I changed it. I assumed the spare died from not being used for years. I got one key to be reprogrammed. The other one I assume the battery is dead. Thank you Dave you saved me a ton of money at the dealership.
You're a lifesaver! My 2015 Toyota Corolla never cycled the door lock during the entire process, but I followed the instructions all the way through and it still worked!
Thank you so much I watched this video 20 times Doing every action as you did them on a 2017 Corolla getting frustrated because the locks wouldn’t cycle and it wasn’t working . Then I paused the video and tried to remember all the steps and I’m pretty sure I did them incorrectly but somehow the locks cycled I press the lock and unlock button and the key worked 😃.
@@UnknownSrt27 I think the one step that I did that wasn’t in the video is I started the car I think it is assumed that when you go to program the car you drove it in somewhere not that it has been sitting in the driveway not running
Thanks Dave! Tried a few sequences that other Tubers posted with no luck. Your's did the trick!! (Note: my 2012 Camry did NOT audibly cycle mid-program and I had to run through the steps twice but it did successfully program the remote. Go figure🤷♀️)
Tried 5 times and only cycled the doors. Opened and clean the black rubery cover then it worked perfectly, 🤔 why, Who knows🤷🏻♂️! But it worked 💫🥳 Thanks a lot for your advice.
Hi Dave, in your instructions; it is bestt if you only turn off and on ONCE. Twice will remove any other remotes that were installed, while one will allow you to keep existing remotes
Hmmm... unfortunately, there's a recurring theme that this either works perfectly (which seems to be the vast majority of times) or it stalls out at the cycle/finish process and darned if I know why. Where did you get the new key? Any chance all the key slots in the immobilizer are already taken?
@@DIYDaveOK I'm unsure as to where the key was gotten but ignition works. I tried doing the on off cycle twice incase the list of paired keys was full same result, no lock cycle to confirm it's ready to adda new remote. (Not sure what you meant by immobilizer)
The immobilizer is the computer component that records and authorizes keys. Typically, most Toyotas allow for up to (I think) five total programmed keys; the two issues by the factory and then up to three additional ones. There is the possibility that other remotes have been programmed and all slots are filled. I don't think the AP200 supports selective deletion of individual keys. If you're not sure where the extra key originated, you might consider getting one from a good source like CarAndTruckRemotes.com (not a sponsor).
update. today i went to cut the keys, and the surprise was that only works for lock and unlock, so i had to pay for programming because my car won't turn on ..
For my own (and others) reference: 1. Open drivers side door 2. Insert and remove original key into ignition twice 3. Close and open driver's door twice 4. Insert and remove good key into ignition once 5. Close and open driver's door twice again 6. Put key into ignition 7. Close drivers door 8. Turn key from off to on to off 1 time 9. remove key, locks should cycle 10. Hold the lock and unlock button for 3 seconds on the new key
Awesome video. Will try this tomorrow morning can't wait. Just had a question I broke my original key. The black alarm part fell off but the key part I still have will this be enough for me to cut the new key fob blank I purchased and then follow these instructions?
For cutting the key, it depends on whether your key shop can secure what you have in the machine to use it as a template. Hard to say for sure. Thanks for the kind words, and for watching! Let us know how it turns out.
Just did it right now and it worked! I'm so happy thank you so much. I have to figure out something else out the check engine snf the Trac off sign is showing for some reason
Well, if you had a working fob and it suddenly stopped working, and no work relating to keys has been done to the car, I'd have to infer a problem with the transponder in the key fob...about the best I could suggest
Hey dave, thank you for the video! I successfully programmed two key fobs for my car, but the only problem I have is that after performing the remote programming, my key fob only locks the door, but does not unlock or open the trunk. I don't think is the key fob because it's new new, so I'm not sure what it could be.
You know, you're the second or third commenter in the last few days (weeks) that had had a problem with the second part of the programming. Do you have another key that does, in fact, unlock the trunk remotely? (Purely making sure we're not overlooking a problem with the lock actuator). I'm wondering if something has changed in the way the key gets written into the IMMO database that prevents the second part of the programming from working. I'm honestly not sure what's going on. I wish I had a better answer for you.
I am going to replace the door control receiver on my friends 2011 Camry and hope this works to reprogram her FOB's. However I don't see your steps that you said would be listed below the video. Thanks in advance.
Hi Buddie, thanks for watching. Here is a link to the steps from CarAndTruckRemotes.com: blog.carandtruckremotes.com/2015/11/05/2009-2010-2011-2012-and-2013-toyota-corolla-free-programming-instructions-for-remote-head-key-keyless-entry-remote-fob-alarm/
Try to do these steps before you replace the door control receiver. Got one from the junkyard for a 2010 corolla, installed it, programmed it and it worked. Put the old one in programmed it and old one worked too. Parts was 13 bucks so not that expensive. Have a back up receiver now.
I couldnt get my 2009 Corolla to get into programming mode, I followed all steps as followed and still had no results The security light just keeps flashing. Door locks never cycled. Any help is appreciated!
Hmmm if that security light is flashing thats a sign something else may be going on, like a problem with one of your existing keys, or perhaps all the slots for new keys are already taken. I'd give it a fresh try from scratch once more.
how would i go about resetting the slots for previous keys? I believe there were multiple fobs before I became the new owner. I also went to a locksmith today and cut the new key, I was asked if I wanted to program it for $100 and kindly declined lol.@@DIYDaveOK
I believe that's highly dependent on the model. I think I'm some cases the tool (like a ThinkDiag) will tell you how many "slots" are occupied, but not sure about giving you the ability to delete anything. You must be sure NOT to delete the master key or you WILL run a risk of *bricking the car*. I don't think ThinkDiag or the older AP200's can handle a master key reprogram, as that may take the vehicle PIN that it may or may not be able to find if you don't have it on hand. Wish I had more concise news for you. Exercise caution with any key deletions if that's your problem .
For some reason when I do these exact steps perfectly, I’m still unable to get the car to give the “success lock”. Not sure if that means there’s an underlying issue or what.
Hmmm it's hard to say, unfortunately. Same year/make, etc? If the computer is already filled with the codes for other fobs, that might be one explanation.
So suddenly three remotes stopped working? Ugh, I misunderstood that! I'd almost suspect that one of the receivers in the car has gone out and is not detecting the key signal!
Hey Dave! Good video. I’m trying these steps on my 2013 Corolla and get to the last steps. The locks cycle “lock/unlock”, but when I press the remote to test, it cycles “lock/unlock/lock/unlock”, and ends up not working. I’ve tried multiple times and each time end with the same result. Any suggestions??
Hmmm...that's strange.. The instances when I've had issues it usually boils down to timing, eg I waited too long (or tried the next step too soon). The steps can be *VERY* finicky!!! Thanks for watching. Give it another try and let me know how it goes.
It was working for me, but the 2nd key wasn’t responding. The battery might be dead cause it hasn’t been used at all. Thank you for the video though, it was very helpful.
Good video Dave. I'm wondering if you have any tips or ideas on how to program to lock and unlock my wife. Sometimes she locks up and nothing I try seems to help at all.
LOL I don't think I could help you there, but if I could figure THAT out for husbands everywhere, that would be one viral video!!! 😆😆😂. Thanks for watching!
Im using a corolla 2.0, 2011, do I need to get a specific frequency for FOB remote of this model? I came across there were two types of frequencies one is 315mhz and the other is 433mhz for Toyota Corolla, or does the receiver of this model able to receive any response from any of these frequency?
Hello, I have a 2013 corolla and just recently i lost the keyless entry key, but still have the dealership spare. Can i use the dealership spare to program a new fob?
Because I've had success with Toyota keys already, I'd say I'm cautiously optimistic it will. It is inherently a finicky process but I think you've got a good chance at success. Let us know how it works out!!
Where can I find instructions to do the same for a 2014 Camry SE? I purchased a blank FOB (type G). Once that's working, I'll move on to the next steps: getting the key cut and attempting the AUTEL 200 (from your other video) for getting the key to start the vehicle.
Each generation's instructions seem to vary just a bit from prior and later versions. I don't have instructions handy for a '14 Camry, but the programming steps in the Autel should match up to that vehicle. Thanks for watching!
Hey DIY Dave, So I have 2 fobs when I program 1 the other 1 disables and vice verse, how do i get them both to work or program both of them? Thanks Greg
Hmmm...sounds to me like you may have the maximum number of fobs programmed to the car, and when you program the last one the previous one gets displaced. That's my first guess at least!
Mine is just staying in "programming mode" . They lock and unlock three times, and when I hold both lock and unlock on the FOB for 3 seconds, the car just continues to stay in programming mode. locking and unlocking three times and never actually programming. Any help or tips for this?
I was able to program the immobliser par of my key for my 2011. But I just can't get the remote part of the key to take on it. I ways able to program my wifes remote and immobiliser on her 2013 on the first try. I have tried umpteen times on my 2011 for the remote part, but it just won't work. I am doing it the same as I did my wifes 2013. Any ideas?
@@DIYDaveOK but the immobiliser part of key programmed fine. It is only the remote part of the key I can't get to program. Also, how would I check how many keys are programmed?
Sorry, my misunderstanding. Man, I'm not sure quite what to think since you clearly understand the process...beginning to grasp at straws a bit, but wonder if the battery in the fob is weak?
@@DIYDaveOK I thought that too, so I went and got a new battery for it. The light comes on and everything when a button is pressed. When I do the fob program part of it. My car cycles the locks 3 or 4 times after I push the lock button for the final time. Idk why it isn't working. I thought I heard somewhere or saw somewhere thst if it does that it means the car is telling you it didn't work. But I can't remember now.
@@adamn5821 Man that's frustrating. Here's a direct link to the Car And Truck Remote website with step by step for those same years and they should be identical to the video. blog.carandtruckremotes.com/2015/11/05/2009-2010-2011-2012-and-2013-toyota-corolla-free-programming-instructions-for-remote-head-key-keyless-entry-remote-fob-alarm/
Im stuck in program mode. After i cycle on and off in the ignition the locks cycle. I press and gold lock and unlock and the locks cycle again. I press any button the locks continue to cycle. If i open door or enter ignition program mode ends and the key doesnt sync
That's really strange; I'm wondering if maybe there is some sightly different step required on your particular vehicle. I wish I had better information for you! ☹️ That's for watching!
Are you reprograming this key because a new battery was put it?...I just put in new CR2025 battery and my key still not working so I am going to try reprogram.
Hi Dave, i got my fob lock & unlock setting working. but the immobiliser not learning yet. can u kindly advise if i need to redo again? or is there a special way to sync with immobiliser? Thank u
Hey Dave, i have a 2010 corolla and found a used key fob from a different corolla between the years of 09-13 but it’s cut different then the original. if the key is already cut what will happen when i reprogram the used key. will it then be the key that starts the vehicle and my old key will only be used to lock the doors manually ? Thanks.
if the physical key is cut differently I don't know that it will engage the immobilizer mechanically to allow it to start. The used/old reprogrammed key *should* still be able to remote unlock and open the trunk.
Is there any way to turn off the wireless remote to a 2018 Toyota Corollahas somebody has gained access to the remote code and locks and unlocks it randomly
Wow, Bruno, that's a bad situation to say the least! What I think you might have to explore is the possibility of having ALL the remote keyless fobs erased from your vehicle's computer memory and having new keys programmed. Ordinarily, this requires access to the OEM's systems to have a new internal "master key" created for your vehicle, and usually that kind of access is limited to only certified locksmiths (or, of course, dealerships). There are some third-party tools that can accomplish this as well, but I have no personal experience with *complete key erasure* and ground-up reprogramming. Exercise caution and good luck! Thanks for watching and commenting!
If you check out the key programming video, you can see how I used the AP200 to program an ignition key. There's a link in the video for it. Thanks for watching!!
Nothing was taken out or changed, if you see a cut it was unintentional. I did this video about five years ago so I can only assume it was a cut for a couple of seconds of dead/pointless activity. No secret magic or deception.
@@DIYDaveOK Thanks Dave! Sounds logical. Do you know the maximum for the 2012 Corolla. We only have two in use now but some were lost or broken a few years ago and we had the new one added. So if that’s the case would I need to ‘somehow’ wipe the memory and then reprogram each existing key? Is that a risky or safe easy DIY project? Would hate to royally screw it up. Any additional insight is greatly appreciated. Thanks !
Unfortunately, clearing out ALL keys erases the *master* key established by the factory. I don't think the AP200 can regenerate a new master key or selective replace a "slot" in key memory.
Idk if anyone will see this comment this many years later. I’m able to do it all and the 3 sec hold works but after that nothing else works. If I hit unlock it will cycle the doors but nothing else works on the fob. Am I missing something?
I read all the comments if I can. I've seen some comments that in some cases what you're experiencing happens, but darned if I understand why. It worked for me as demonstrated. I wish I had an answer for you, but there doesn't seem to be a rhyme or reason for when it doesn't work.
@@DIYDaveOK thank you anyway! I think my kids deprogrammed it bc it had worked just fine prior. I’ll keep doing research and if I come across a solution that works I will send it your way for anyone else who has my problem too.
My son bought a couple off Amazon for his car and they do not work I was able to program my my key from my car to his car yeah 1 key fob 2 cars 😑 he has contacted the Amazon seller and are awaiting reply. So in short I found out no you do not need a original key fob to program a new key fob. Thank you for the quick response 👍🏼.
Here is a step-by-step list of instructions for this model year from CarAndTruckRemotes.com (not a sponsor):
blog.carandtruckremotes.com/2015/11/05/2009-2010-2011-2012-and-2013-toyota-corolla-free-programming-instructions-for-remote-head-key-keyless-entry-remote-fob-alarm/
good morning, please I lost all my Toyota sensor keys, how can I start my car
I have followed this step-by-step in our 2013 Corolla with no luck
Sorry Johnny, is this with a new spare key?
@@DIYDaveOK no, original key for our 2013 Corolla. I guess it’s 80bit key encryption, not 40 and requires a dealership ?
Ugh, it usually isn't a matter of encryption length. If your original key won't start it, and you have no spare, you may have to go to a dealer or locksmith to program a new master key, and for that you typically have to have the manufacturer master four-digit PIN that was assigned to the vehicle when it was manufactured. That normally comes on a small rectangular plate with all the original sale paperwork or is taped to the original manuals. It frequently gets lost., or the selling dealer conveniently "forgets" to give it to the original buyers this forcing the to the dealer if all keys are lost. You can erase all keys from the immobilizer with some tools, but you typically cannot program a new *initial* (first) key without the PIN. I suppose if you have no way of starting the car right now you have nothing to lose by trying, but understand the risks if you go in to the IMMO menu, find an option to erase all keys, then cannot (for some or any reason) program a new one.
This worked on my 2016 corolla. My key and spare were not working. I assumed the battery died so I changed it. I assumed the spare died from not being used for years. I got one key to be reprogrammed. The other one I assume the battery is dead. Thank you Dave you saved me a ton of money at the dealership.
That's fantastic! Thanks so much for letting us know.
You're a lifesaver! My 2015 Toyota Corolla never cycled the door lock during the entire process, but I followed the instructions all the way through and it still worked!
Awesome!! So glad it worked for you!!
I tried doing it on my 2015 corolla, somehow it's not working, I'm not sure if it's the key (not oem) or I'm doing it wrong.
It's possible the steps vary slightly for a 2015, not 100% sure.
Same, I'm having the same issue with my 2010.
I feel like it might be an app issue.
I was able to program a OEM key though
@@matthewbelviz8230
I bought 2 key fobs I paid $10 for both to be cut I did this process and both work total I paid was less than 35$ Thank you
hey if you remember where did you get the car keys cut at?
Just a local locksmith
@@DIYDaveOK thanks
Where did you bought that keys from?
I buy all my fobs and remotes from CarAndTruckRemotes.com (not a sponsor).
It worked,I can’t believe it,I feel very happy like a child…Thank you DIYDAVID
Your explanation to program the Toyota Corolla key fob worked as promised. Easy and quick. Thanks for sharing the the information.
My pleasure!! Glad it was helpful!
After I had changed the battery for my car key, it wasn’t working. I did this procedure and it is back to normal. Thank you for posting this! 🎉🤩
Awesome. Worked exactly as you said. I was able to put the fob parts into the old key!! Works like it came from the factory!!
Fantastic!!!
Thank you Dave.
This was a very clear video with instructions clearly laid out and very easy to follow.
Thanks for watching, Peter!
Very clear, great instructions! It took me a longer time watching the video than it did reprograming the clicker.
Thank God I just saw this video,thank you DIYDAVID
Thank you so much I watched this video 20 times Doing every action as you did them on a 2017 Corolla getting frustrated because the locks wouldn’t cycle and it wasn’t working . Then I paused the video and tried to remember all the steps and I’m pretty sure I did them incorrectly but somehow the locks cycled I press the lock and unlock button and the key worked 😃.
Awesome!!
How exactly did you do it?
@@UnknownSrt27 I think the one step that I did that wasn’t in the video is I started the car I think it is assumed that when you go to program the car you drove it in somewhere not that it has been sitting in the driveway not running
Thanks! Worked perfectly for my Corolla 2013.
Great to hear!
Thank you!
At the end, I had to step out of the vehicle and used the key fob, and it’s works ❤
Awesome! Great to hear a success story!!
Thanks Dave! Tried a few sequences that other Tubers posted with no luck. Your's did the trick!! (Note: my 2012 Camry did NOT audibly cycle mid-program and I had to run through the steps twice but it did successfully program the remote. Go figure🤷♀️)
Awesome!! Glad it worked for you!!!
Thank you!! I just programmed a key for a 2012 Scion XB. The steps worked!!
Awesome! Thanks for letting me know!
I seen your comment so. I ordered a pair had the key cut and i programmed x2 keys for my 2012 XB. $60 new set of keys 😁👍🏼
Woohooo!!! Just did it. Your door technique was the trick. Much love sir!!!
Awesome! Thanks for watching!
Just saved $300 from the dealer thanks a lot 👍🏼👍🏼👍🏼
Awesome!! That's why I do these videos!!! Thanks for watching!
This was very timely for me...it helped immensely in programming my RAV4 key fob. Many thanks for the clear instructions. Cheers Mike.
Glad it helped! Thanks for watching!
2009 Toyota Matrix .... T H A N K Y O U !! This worked !!! I am so grateful ! 👍
That's awesome to hear! Thanks for sharing!
Tried 5 times and only cycled the doors.
Opened and clean the black rubery cover then it worked perfectly, 🤔 why, Who knows🤷🏻♂️!
But it worked 💫🥳
Thanks a lot for your advice.
Fantastic! Thanks for letting me know and for watching!
Worked perfect for my 2011 Toyota Corolla!!! Thanks 😊
Great to hear! Thanks for watching!
It didn’t for me :/
Thank you. Got a 2014 Corolla remote happy and working.
Awesome!! Glad it worked for you and thanks for watching!
Hi Dave, in your instructions; it is bestt if you only turn off and on ONCE. Twice will remove any other remotes that were installed, while one will allow you to keep existing remotes
Really?
This worked for me, super easy instructions and clearly given.
Thanks Tomz!!
WOWWWWW THANKSSSSSSSSS I FOLLOW YOUR INSTRUCTION I WATCH YOUR VIDEO AND IT WORKS PERFECTLY THANK YOU VERY MUCH 👋 FROM PUERTO RICO🇵🇷🌴
Awesome!! So glad it helped you! Thanks for watching!
This actually worked for my 09 Corolla tyvm!
Fantastic!! Glad it worked for you!! Thanks for watching!
2010 toyota corolla 1.8L. Worked perfectly!
Awesome!!! Thanks for giving it a try and letting us know it worked!!
Hi I'm trying on a 2010 corlla S but it doesn't cycle
Hmmm... unfortunately, there's a recurring theme that this either works perfectly (which seems to be the vast majority of times) or it stalls out at the cycle/finish process and darned if I know why. Where did you get the new key? Any chance all the key slots in the immobilizer are already taken?
@@DIYDaveOK I'm unsure as to where the key was gotten but ignition works. I tried doing the on off cycle twice incase the list of paired keys was full same result, no lock cycle to confirm it's ready to adda new remote.
(Not sure what you meant by immobilizer)
The immobilizer is the computer component that records and authorizes keys. Typically, most Toyotas allow for up to (I think) five total programmed keys; the two issues by the factory and then up to three additional ones. There is the possibility that other remotes have been programmed and all slots are filled. I don't think the AP200 supports selective deletion of individual keys. If you're not sure where the extra key originated, you might consider getting one from a good source like CarAndTruckRemotes.com (not a sponsor).
Thank you ones again for your video’s just program my key and key fob🤙🏻
Awesome!! Thanks for letting us know!!
thanks a lot it worked for me at first time on 2010 toyota corolla le...
Fantastic!! Thanks for letting me know!
update. today i went to cut the keys, and the surprise was that only works for lock and unlock, so i had to pay for programming because my car won't turn on ..
Great video, instructions are clear. Was able to program my dads 09 Corolla in a few minutes.
Great to hear! Thanks for watching!
Did you need a lock smith to program the key?
Hey Kevin sosa I also have a 09 Corolla what key fob did you use ?
@@lucero3900 sorry just saw this. No I was able to do it myself.
I'm going to order a spare key when I have it I'm going to program it thanks for the video it's very easy.
Awesome! Thanks for watching!
How'd it go did it work?
Im shocked it actually worked lol thanks for the info!
Fantastic!!! Thanks❤️
Thank you thank you thank you! You just saved me $200
That's awesome!!! Thanks for letting me know!!!
For my own (and others) reference:
1. Open drivers side door
2. Insert and remove original key into ignition twice
3. Close and open driver's door twice
4. Insert and remove good key into ignition once
5. Close and open driver's door twice again
6. Put key into ignition
7. Close drivers door
8. Turn key from off to on to off 1 time
9. remove key, locks should cycle
10. Hold the lock and unlock button for 3 seconds on the new key
Works perfect to my toyota corolla 2013. Thank you dave
Awesome! Glad it worked for you!!
Thanks for that! You just save me a trip to the garage.
Worked like magic!!! Thanks
Awesome! Glad it worked for you, and thanks for watching!
The instructions worked really well 👍
Awesome!
thank you very much my problem was solved successfully
Awesome! Thanks for watching!
THIS WORKED!!!!
AWESOME!!
Wow this really work thanks so much Sir
Glad it helped! Thanks for watching!
Awesome video. Will try this tomorrow morning can't wait. Just had a question I broke my original key. The black alarm part fell off but the key part I still have will this be enough for me to cut the new key fob blank I purchased and then follow these instructions?
For cutting the key, it depends on whether your key shop can secure what you have in the machine to use it as a template. Hard to say for sure. Thanks for the kind words, and for watching! Let us know how it turns out.
Just did it right now and it worked! I'm so happy thank you so much. I have to figure out something else out the check engine snf the Trac off sign is showing for some reason
First times the charm. Thanks!!!
Youre a hero!!
LOL Thanks!! ❤️
Worked the 1st time. 👍🏾
Awesome!! Thanks for watching!
Really nice video sir. Would this steps also work for Toyota Fortuner 2009?
Hi, Sy! Unfortunately, I'm just not familiar enough with that vehicle to hazard a guess.
Hey my key fob stopped being able to lock and unlock my corolla 2008 i have tried multiple of these videod and none of them work i am very confused
Well, if you had a working fob and it suddenly stopped working, and no work relating to keys has been done to the car, I'd have to infer a problem with the transponder in the key fob...about the best I could suggest
Hey dave, thank you for the video! I successfully programmed two key fobs for my car, but the only problem I have is that after performing the remote programming, my key fob only locks the door, but does not unlock or open the trunk. I don't think is the key fob because it's new new, so I'm not sure what it could be.
You know, you're the second or third commenter in the last few days (weeks) that had had a problem with the second part of the programming. Do you have another key that does, in fact, unlock the trunk remotely? (Purely making sure we're not overlooking a problem with the lock actuator). I'm wondering if something has changed in the way the key gets written into the IMMO database that prevents the second part of the programming from working. I'm honestly not sure what's going on. I wish I had a better answer for you.
Thanks. Will try.
Thank you for this video I'll have to try this so I have a spare fob
I'm glad it was helpful!; Thanks for watching!
Thank you, it worked for me
This is very good way thanks
Thanks for watching!
I am going to replace the door control receiver on my friends 2011 Camry and hope this works to reprogram her FOB's. However I don't see your steps that you said would be listed below the video. Thanks in advance.
Hi Buddie, thanks for watching. Here is a link to the steps from CarAndTruckRemotes.com: blog.carandtruckremotes.com/2015/11/05/2009-2010-2011-2012-and-2013-toyota-corolla-free-programming-instructions-for-remote-head-key-keyless-entry-remote-fob-alarm/
Try to do these steps before you replace the door control receiver. Got one from the junkyard for a 2010 corolla, installed it, programmed it and it worked. Put the old one in programmed it and old one worked too. Parts was 13 bucks so not that expensive. Have a back up receiver now.
It works!!!! Many thanks for this video
Thanks man!!! realy helpful video
Great! Thanks for watching!
🤣🤣🤣 why does this seem like we're just putting on a crazy show for our neighbors! But.... im going to try it...
Worked great man! Thank you. Very easy to do and understand
Awesome!! Glad it was helpful and thanks for watching!
I couldnt get my 2009 Corolla to get into programming mode, I followed all steps as followed and still had no results
The security light just keeps flashing. Door locks never cycled. Any help is appreciated!
Hmmm if that security light is flashing thats a sign something else may be going on, like a problem with one of your existing keys, or perhaps all the slots for new keys are already taken. I'd give it a fresh try from scratch once more.
how would i go about resetting the slots for previous keys? I believe there were multiple fobs before I became the new owner.
I also went to a locksmith today and cut the new key, I was asked if I wanted to program it for $100 and kindly declined lol.@@DIYDaveOK
I believe that's highly dependent on the model. I think I'm some cases the tool (like a ThinkDiag) will tell you how many "slots" are occupied, but not sure about giving you the ability to delete anything. You must be sure NOT to delete the master key or you WILL run a risk of *bricking the car*. I don't think ThinkDiag or the older AP200's can handle a master key reprogram, as that may take the vehicle PIN that it may or may not be able to find if you don't have it on hand. Wish I had more concise news for you. Exercise caution with any key deletions if that's your problem .
Muchas gracias por tu video. Me fue muy útil thank you so much!!!
Gracias, mi amigo!! gracias por ver mi video
I had a toyota corolla 2009 xrs 2.4 works perfectly 👍👍👍👍👋
That's great! Thanks for watching!
What key fob did you use?
For some reason when I do these exact steps perfectly, I’m still unable to get the car to give the “success lock”. Not sure if that means there’s an underlying issue or what.
Hmmm it's hard to say, unfortunately. Same year/make, etc? If the computer is already filled with the codes for other fobs, that might be one explanation.
Hi if my 16 corolla stopped unlocking/locking will this help reprogram them? Already replaced batteries in 3 of my remotes. Thanks
I'd almost suspect a failure of the electronics in the fob itself first, I'm afraid.
@@DIYDaveOK but all 3? 2 original and 1 aftermarket. Thanks for the reply
So suddenly three remotes stopped working? Ugh, I misunderstood that! I'd almost suspect that one of the receivers in the car has gone out and is not detecting the key signal!
@DIYDaveOK we got 1 to work the original one aftermarket one doesn't work yet 3rd key (2nd original mia lol), but I appreciate your replies
Hey Dave! Good video. I’m trying these steps on my 2013 Corolla and get to the last steps. The locks cycle “lock/unlock”, but when I press the remote to test, it cycles “lock/unlock/lock/unlock”, and ends up not working. I’ve tried multiple times and each time end with the same result. Any suggestions??
Hmmm...that's strange.. The instances when I've had issues it usually boils down to timing, eg I waited too long (or tried the next step too soon). The steps can be *VERY* finicky!!! Thanks for watching. Give it another try and let me know how it goes.
Dear L Boswell, I have the same issue. Please tell me if you found a solution. Thank you!
@@DIYDaveOK hello Dave my 2010 Corolla is having same issue.. I am trying to make the matter key work but it won't work, please advise.. Thank you
Same. Mins is doong this and idk what to do
When your turn the car ignition on, instead of doing it once. Do it twice. This worked for me.
It was working for me, but the 2nd key wasn’t responding. The battery might be dead cause it hasn’t been used at all. Thank you for the video though, it was very helpful.
You're very welcome! Thanks for watching!
IT WORKED! THANKS!
Awesome!! Glad it was helpful!!
Good video Dave. I'm wondering if you have any tips or ideas on how to program to lock and unlock my wife. Sometimes she locks up and nothing I try seems to help at all.
LOL I don't think I could help you there, but if I could figure THAT out for husbands everywhere, that would be one viral video!!! 😆😆😂. Thanks for watching!
I managed to put it in programming mode. But when I click the buttons the car just keeps cycling…
Im using a corolla 2.0, 2011, do I need to get a specific frequency for FOB remote of this model?
I came across there were two types of frequencies one is 315mhz and the other is 433mhz for Toyota Corolla, or does the receiver of this model able to receive any response from any of these frequency?
I think the model year and make would be sufficient guarantee the proper type of fob.
Thanks for the video. Worked for me the Service manual for the 2010 corolla on how to do this was not that clear.
Hello, I have a 2013 corolla and just recently i lost the keyless entry key, but still have the dealership spare. Can i use the dealership spare to program a new fob?
As long as you have one of the original keys, you *should* be able to program a new fob. Thanks for watching!
Will this work for a 2016 Toyota Camry
Because I've had success with Toyota keys already, I'd say I'm cautiously optimistic it will. It is inherently a finicky process but I think you've got a good chance at success. Let us know how it works out!!
Ty
My daughter did it from college.
Where can I find instructions to do the same for a 2014 Camry SE? I purchased a blank FOB (type G). Once that's working, I'll move on to the next steps: getting the key cut and attempting the AUTEL 200 (from your other video) for getting the key to start the vehicle.
Each generation's instructions seem to vary just a bit from prior and later versions. I don't have instructions handy for a '14 Camry, but the programming steps in the Autel should match up to that vehicle. Thanks for watching!
Thank you. Just used it to program mine
Hi. I’m trying to program another one and it’s not working. What could be the cause?
When you complete the programming cycle, does the car respond as expected? What year/make etc are we working with?
2009 Corolla. It wasn’t recycling initially but it just did When I press the lock and unlock buttons together it doesn’t function from there.
Hey DIY Dave, So I have 2 fobs when I program 1 the other 1 disables and vice verse, how do i get them both to work or program both of them? Thanks Greg
Hmmm...sounds to me like you may have the maximum number of fobs programmed to the car, and when you program the last one the previous one gets displaced. That's my first guess at least!
Mine is just staying in "programming mode" . They lock and unlock three times, and when I hold both lock and unlock on the FOB for 3 seconds, the car just continues to stay in programming mode. locking and unlocking three times and never actually programming. Any help or tips for this?
Hmmm I wish I had a brilliant answer for you. What year/model vehicle?
I was able to program the immobliser par of my key for my 2011. But I just can't get the remote part of the key to take on it. I ways able to program my wifes remote and immobiliser on her 2013 on the first try. I have tried umpteen times on my 2011 for the remote part, but it just won't work. I am doing it the same as I did my wifes 2013. Any ideas?
Dang, makes me wonder if the max number have keys are already in the immobilizer already....would be worth checking..think the max is five
@@DIYDaveOK but the immobiliser part of key programmed fine. It is only the remote part of the key I can't get to program. Also, how would I check how many keys are programmed?
Sorry, my misunderstanding. Man, I'm not sure quite what to think since you clearly understand the process...beginning to grasp at straws a bit, but wonder if the battery in the fob is weak?
@@DIYDaveOK I thought that too, so I went and got a new battery for it. The light comes on and everything when a button is pressed. When I do the fob program part of it. My car cycles the locks 3 or 4 times after I push the lock button for the final time. Idk why it isn't working. I thought I heard somewhere or saw somewhere thst if it does that it means the car is telling you it didn't work. But I can't remember now.
@@adamn5821 Man that's frustrating. Here's a direct link to the Car And Truck Remote website with step by step for those same years and they should be identical to the video. blog.carandtruckremotes.com/2015/11/05/2009-2010-2011-2012-and-2013-toyota-corolla-free-programming-instructions-for-remote-head-key-keyless-entry-remote-fob-alarm/
Thank you & good work..
Thanks for the kind words and thanks for watching!!
Im stuck in program mode. After i cycle on and off in the ignition the locks cycle. I press and gold lock and unlock and the locks cycle again. I press any button the locks continue to cycle. If i open door or enter ignition program mode ends and the key doesnt sync
That's really strange; I'm wondering if maybe there is some sightly different step required on your particular vehicle. I wish I had better information for you! ☹️ That's for watching!
The same thing is happening to my car after all these steps. were you able to figure it out and make it work?
works like a charm🎉
Thanks perfect 🥰
Thank you!!
2:37 for my reference
Are you reprograming this key because a new battery was put it?...I just put in new CR2025 battery and my key still not working so I am going to try reprogram.
No this was a new secondary key. We bought the car used and it only had one key, so we needed a spare. Thanks for watching!
Hi Dave, i got my fob lock & unlock setting working. but the immobiliser not learning yet. can u kindly advise if i need to redo again? or is there a special way to sync with immobiliser? Thank u
I would always advise just going through the steps once again. The process can be very finicky!
I lost my original fob but dealer cut a key that manually unlocks my door and starts the ignition. Do I need the original fob to program the new one?
Hey Dave, i have a 2010 corolla and found a used key fob from a different corolla between the years of 09-13 but it’s cut different then the original. if the key is already cut what will happen when i reprogram the used key. will it then be the key that starts the vehicle and my old key will only be used to lock the doors manually ?
Thanks.
if the physical key is cut differently I don't know that it will engage the immobilizer mechanically to allow it to start. The used/old reprogrammed key *should* still be able to remote unlock and open the trunk.
Is there any way to turn off the wireless remote to a 2018 Toyota Corollahas somebody has gained access to the remote code and locks and unlocks it randomly
Wow, Bruno, that's a bad situation to say the least! What I think you might have to explore is the possibility of having ALL the remote keyless fobs erased from your vehicle's computer memory and having new keys programmed. Ordinarily, this requires access to the OEM's systems to have a new internal "master key" created for your vehicle, and usually that kind of access is limited to only certified locksmiths (or, of course, dealerships). There are some third-party tools that can accomplish this as well, but I have no personal experience with *complete key erasure* and ground-up reprogramming. Exercise caution and good luck! Thanks for watching and commenting!
THANKS MAN, WORK GREATS.. 5 STARS TO YOU, HOW DO I PROGRAMME MY NEW KEY TO START ENGINE
If you check out the key programming video, you can see how I used the AP200 to program an ignition key. There's a link in the video for it. Thanks for watching!!
Hi DIY Dave
At 3:55 your camera cut to a different time when locking with the new fob didnt work. What did you do to finish the programming?
Nothing was taken out or changed, if you see a cut it was unintentional. I did this video about five years ago so I can only assume it was a cut for a couple of seconds of dead/pointless activity. No secret magic or deception.
Cool, thanks DIY Dave
Awesome man thanks
it did the cycle thing but if i try to test if the key paired, the locks just start cycling again…. so idk what’s going wrong
Hi, what could be causing the registration to fail? goes through to end but then locks unlocks twice indicating failed. )-:
The first thing I would speculate is that you've reached the max number of keys in the immobilizer. Purely a guess at this point.
@@DIYDaveOK Thanks Dave! Sounds logical. Do you know the maximum for the 2012 Corolla. We only have two in use now but some were lost or broken a few years ago and we had the new one added. So if that’s the case would I need to ‘somehow’ wipe the memory and then reprogram each existing key? Is that a risky or safe easy DIY project? Would hate to royally screw it up. Any additional insight is greatly appreciated. Thanks !
@@jerryr574 I won't swear to this, but I think it is five.
@@DIYDaveOK aha.. so I’ll need to clear the system and restore the two I have. Do you have that info or a link to where I can learn how to do that ?
Unfortunately, clearing out ALL keys erases the *master* key established by the factory. I don't think the AP200 can regenerate a new master key or selective replace a "slot" in key memory.
It works, thank you!
Awesome!! Thanks for watching!
Thanks!
Idk if anyone will see this comment this many years later. I’m able to do it all and the 3 sec hold works but after that nothing else works. If I hit unlock it will cycle the doors but nothing else works on the fob. Am I missing something?
I read all the comments if I can. I've seen some comments that in some cases what you're experiencing happens, but darned if I understand why. It worked for me as demonstrated. I wish I had an answer for you, but there doesn't seem to be a rhyme or reason for when it doesn't work.
@@DIYDaveOK thank you anyway! I think my kids deprogrammed it bc it had worked just fine prior. I’ll keep doing research and if I come across a solution that works I will send it your way for anyone else who has my problem too.
My master key stop opening and closing remotely my car few days ago ...I tried this but no luck ...anyone got any help?
Yikes. If your master key no longer works, that may be a problem internal to the computer/Immobilizer system.
What if you don't have a original factory key fob?
Programming a new key in this way all but requires one existing good key if I'm not mistaken.
My son bought a couple off Amazon for his car and they do not work I was able to program my my key from my car to his car yeah 1 key fob 2 cars 😑 he has contacted the Amazon seller and are awaiting reply. So in short I found out no you do not need a original key fob to program a new key fob. Thank you for the quick response 👍🏼.
Can u recomend a good place i can buy a remote for my Corolla 2011? Thank u!
I'd try CarandTruckRemotes.com. I've bought all my remotes/keys from them. (Not a sponsor).
@@DIYDaveOK thank u!
@@Ru4444 My pleasure!! You are most welcome!!
Forgot the instructions in part 2. Can you post a link to them in the description please.