I own a 2009 Toyota Tacoma. 4 years ago my keyless remote stopped working. I replaced the battery and still did not work. I phone the dealer, Williams lake bc Canada and was told..$260 for the replacement, labor was $220 and reprogram was also $220...a $700 bill. Of course, I said I can live without it. This morning,I watched this video and tried what was said. It Worked!!! . I am going to call back that dealer and ..... well I will keep what I will tell them to myself. Thank you for making my day.
Great video, real time solution that worked for my 2009 Tacoma that has 109k miles. The fob quit working suddenly, I went to my local Florida dealer who told me the cost would be $99 For a diagnosis-which would NOT apply to any repair or parts-plus perhaps $200 for the actual repair or reprogramming! Or he would sell me a new key-also for $300! I nearly choked at such unmitigated avarice. THANK YOU, Tomahawk DIY!
MOST important point is that, when turning to ON need to turn ALL THE WAY ON, so that instrument panel lights light up (not cranking, of course). No other programming instructions made that clear, so I was getting close to paying toyota service $600 for B.S. replacing body ecm. Thanks!
+rdlareau Glad to hear it worked!! Now you have the chance to help people in some of earths most dire circumstances solve a problem such as no clean water, no shelter, no medical care, hunger, etc.. TomahawkDIY is a business with a mission. No pressure, but donations are always appreciated. www.paypal.me/TomahawkDIY or Venmo @TomahawkDIY if you want to send one. 50% of donations are sent to help people Build Better Lives in some of earths most dire circumstances (TomahawkDIY.com/about).
I rewrote the instructions for my advantage, got myself two remotes from the suggested site, and in less than five minutes had two more operational key fobs. I have a 2011 Tacoma TRD Off road with all of the bells and whistles.....It works! One happy camper thanks you! Keys are next, thank you for that video as well.
THANK YOU!!!! i just put new batteries in. nothing. called dealership who said i had to bring it in and probably get new fob. saw this...went out tried it..and fob works great! YOU ROCK!! thank you!!
Thank you Mike, I bought my 2007 Sienna with one remote not programmed, dealer asked for over $100. I kept the one for 10 years until I followed your video today. In 2 minutes I have programmed the keyless remote. Valuable video!
Worked perfectly for a Toyota 2007 4runner! For the key cutting I'd recommended going to a good locksmith and avoid big box stores like homedepot or ace who sometimes don't cut blanks that aren't their own. I got a blank first to test the fidelity of cutting first, then got my transponder key cut after programming it. Total cost was about $20 and a few hours of my time.
+omar au staiti Glad to hear it helped!! Now you have the chance to help people in some of earths most dire circumstances solve a problem such as no clean water, no shelter, no medical care, hunger, etc.. TomahawkDIY is a business with a mission. No pressure, but donations are always appreciated. www.paypal.me/TomahawkDIY or Venmo @TomahawkDIY if you want to send one. 50% of donations are sent to help people Build Better Lives in some of earths most dire circumstances (TomahawkDIY.com/about).
So glad to hear it helped you!. Donations are always appreciated. www.paypal.me/TomahawkDIY or Venmo @TomahawkDIY if you want to send one. 50% of donations are sent to help people Build Better Lives in some of earths most dire circumstances (TomahawkDIY.com/about)
Your instructions worked like a charm! I'd tried to follow several other and nothing. I followed along with your instructions, Bam! Remote programed! Thank you!
This helped soooo much! Thank you for posting this! I tried it just like you did and now my fob works again! This was awesome and saved me a tooon of money if I took it to a dealership. $6 for a new battery and this tutorial just made my wallet happy.
I bought the GQ4-29T with 4D67 chip from Keyless2Go (Amazon) for my 2009 Matrix. There was a number for tech support, but instead I used your directions. Thanks so much.
I give 5-Stars to Toms Key, but not for getting some new FOBs programmed - Unfortunately, it didn’t work for me! The 5-Star rating is for their service! A few weeks ago I purchased 2 new FOBs and rented the programmer for my 2008 Toyota Highlander. (I recall when I bought the car new that even the dealer had issues with programming the FOBs using their computer). I had a few questions about programming the FOBs and William, from Toms Key, addressed my concerns. I made several attempts at programming and had a few back and forth e-mails with William. William reminded me on at least two occasions that they back up their products with a 100% refund guarantee. I finally conceded that this was not going to work for me. I packed up the FOBs and programmer and sent them back. A couple days later William sent me an e-mail saying that my refund was being processed. This is the kind of service that makes a company successful! Even though it didn’t work for me, I’d go back to them first for another car.
Great to hear! Glad to hear that it worked for your Toyota Avalon 2006. You're very much welcome! If you have any questions or need assistance in the future, don't hesitate to reach out at help@tomskey.com. Safe travels!
worked famously for 2006 Sienna. Received 2 fobs for $15 from Amazon, so this saved around $150 from what the dealer cost would have been for just one. PS - the van has a chipped key.
LOL 😂 excellent first time on this channel awesome my only problem is the music it wasn’t annoying but it made it difficult for me to listen to the music and listen to you at the same time lol but it was excellent thank you 🙏
Gid bless you mike .....yesterday mine stooed works ng on tacoma 2011.....i was readdy to go to mecanic and pay money.....luckelly i just folowed your video and it works.....thanks
I purchase a 2009 Tacoma few days ago and I went through this process to program a new remote and it didn't work. I noticed there was a blue blinking light near the bottom left panel where hood release latch was. It occurred to me that the previous owner must've installed a after market car alarm. Having said this, would this interfere with programming the new remote? Thanks.
+vinnie lien So glad to hear it helped you! No pressure, but donations are always appreciated. www.paypal.me/TomahawkDIY or Venmo @TomahawkDIY if you want to send one. 50% of donations are sent to help people Build Better Lives in some of earths most dire circumstances (TomahawkDIY.com/about).
I've not seen that before where lock/unlock work but the other buttons don't, unless there is a problem with the power assist to the doors. I presume the side and rear door y open with power assist when you push the buttons built in near the driver seat to open them?
Hi mate, I have 2 used remote which I keep when my 2010 Camry wrecked in an accident. It's exactly as same as you have got. Now I bought a Kluger 2010 model and it has same remote. Can I program that used Camry remote to the Kluger.
Good Vid! I watched a couple of these vids and this also worked for my Toyota Avalon 2007. I suspect they have the same programming as the Sienna, at least, they have the same engine! :) Great times, used the Link you provided, worked flawlessly when I got my model vehicle. @ $35 to get a new set of remotes! Because there's some Good times when you can DIY!
+Juan C. Bribiesca thanks for letting me know it worked on your vehicle. I didn't have that one on the list yet. So glad to hear it helped you! No pressure, but if you want to, you can leave me a tip via www.paypal.me/TomahawkDIY.
+Ron Mainne So glad to hear it helped you! No pressure, but donations are always appreciated. www.paypal.me/TomahawkDIY or Venmo @TomahawkDIY if you want to send one. 50% of donations are sent to help people Build Better Lives in some of earths most dire circumstances (TomahawkDIY.com/about).
FYI: Another you tuber stated, "If your ignition key is marked with a G then you must have the dealer hook it to their tech machine and have them program the key fob."
Glad to know it worked for your 2013 Scion XB. If you have any more questions or need further assistance, feel free to reach out. Thanks for choosing Tom's Key Company!
Nice explanation. Is there same method for 2011 Rav4? I already have one key. In case of failure to setup program in new key; will this impact to existing working remote key? Thanks
Hi, not sure if you have a push button or not, but you may check this link to find your vehicle, we have a related video for the push button start tomskey.com/pages/toyota#rav4. Alternatively, you can reach out to us at help@tomskey.com for assistance. Also, this just ads a new key. No existing keys get erased
Very helpful video, really appreciated your heads up warnings & tips. Keep up the good work. As a suggestion the background music was distracting & too loud making it difficult to hear you.
Mike i only have the 2 original keys that contain the transponders. I see you are using a key without that. Can i still use these keys? Its just my one fob that is failing.
This worked perfectly and quickly! Thanks so much!!! Do you know how to get into a 2005 Toyota glove box without using the open handle? Either the lock tab is stuck locked or something is blocking it from opening from the inside of the glove box. Thanks.
Thanks for the video. I followed your instructions and got to the car into programming mode, pressed both the lock n unlock buttons on the remote, pressed the lock button but the car locks didn't cycle. I have done this severally to no avail. What could possibly be wrong?
Try repeating the procedure with the original remote. If that kicks out the new one you program, try clicking the Lock/unlock then lock buttons on both remotes after doing the procedure
This works perfect on a 2007 FJ Cruiser! I had an issue where it would cycle twice instead of once and then not work - but I just wasn’t doing it quick enough was all
Hello I am watching you read the sequence of instructions on your lap. With the car tones and opening and closing the door, I can’t keep up with you. Would you please post or email the steps you are reading from? Thanks
Hey mike, I have a 2011 Toyota Highlander, It is the same key model, but when finished turning the ignition on and off. The door does not open and close.
So glad to hear it helped you solve a problem! Now you have the chance to help people in some of earths most dire circumstances solve a problem such as no clean water, no shelter, no medical care, hunger, etc.. TomahawkDIY is a business with a mission. No pressure, but donations are always appreciated. www.paypal.me/TomahawkDIY or Venmo @TomahawkDIY if you want to send one. 50% of donations are sent to help people Build Better Lives in some of earths most dire circumstances (TomahawkDIY.com/about).
I went very fast on 2008 Camry with almost no break, and could not get it into programming mode ( no door lock cycled). I will try to slow it down like what you do.
Yes. Toyota stopped this method from working on vehicles starting about 2010. That led me to start TomsKey.com so people have an affordable way to make new keys and Fobs.
Im am sepeachless as i try this for my camery97 !!! I now have thge key and 2 remotes... The wireless contrapment i bought didnt even work this was done once and verry successful!?! All i can asay is thank you and how did u obtain this info!?
![Program Toyota Smart Key Fob Yourself [Push Button Start Vehicles]](http://i.ytimg.com/vi/aowdlhj2lPE/mqdefault.jpg)
Need a key or fob? I started tomskey.com so you can save money. Come find your vehicle - even newer ones!!!
I own a 2009 Toyota Tacoma. 4 years ago my keyless remote stopped working. I replaced the battery and still did not work. I phone the dealer, Williams lake bc Canada and was told..$260 for the replacement, labor was $220 and reprogram was also $220...a $700 bill. Of course, I said I can live without it. This morning,I watched this video and tried what was said. It Worked!!! . I am going to call back that dealer and ..... well I will keep what I will tell them to myself. Thank you for making my day.
Toyota dealerships do not do what is best for the customer ONLY their pocketbook.
Great video, real time solution that worked for my 2009 Tacoma that has 109k miles. The fob quit working suddenly, I went to my local Florida dealer who told me the cost would be $99 For a diagnosis-which would NOT apply to any repair or parts-plus perhaps $200 for the actual repair or reprogramming! Or he would sell me a new key-also for $300! I nearly choked at such unmitigated avarice.
THANK YOU, Tomahawk DIY!
MOST important point is that, when turning to ON need to turn ALL THE WAY ON, so that instrument panel lights light up (not cranking, of course). No other programming instructions made that clear, so I was getting close to paying toyota service $600 for B.S. replacing body ecm.
Thanks!
+rdlareau Glad to hear it worked!! Now you have the chance to help people in some of earths most dire circumstances solve a problem such as no clean water, no shelter, no medical care, hunger, etc.. TomahawkDIY is a business with a mission. No pressure, but donations are always appreciated. www.paypal.me/TomahawkDIY or Venmo @TomahawkDIY if you want to send one. 50% of donations are sent to help people Build Better Lives in some of earths most dire circumstances (TomahawkDIY.com/about).
I rewrote the instructions for my advantage, got myself two remotes from the suggested site, and in less than five minutes had two more operational key fobs. I have a 2011 Tacoma TRD Off road with all of the bells and whistles.....It works! One happy camper thanks you! Keys are next, thank you for that video as well.
THANK YOU!!!! i just put new batteries in. nothing. called dealership who said i had to bring it in and probably get new fob. saw this...went out tried it..and fob works great! YOU ROCK!! thank you!!
Thank you Mike, I bought my 2007 Sienna with one remote not programmed, dealer asked for over $100. I kept the one for 10 years until I followed your video today. In 2 minutes I have programmed the keyless remote. Valuable video!
Worked perfectly for a Toyota 2007 4runner! For the key cutting I'd recommended going to a good locksmith and avoid big box stores like homedepot or ace who sometimes don't cut blanks that aren't their own. I got a blank first to test the fidelity of cutting first, then got my transponder key cut after programming it. Total cost was about $20 and a few hours of my time.
keep up the videos and the good work , you saved me $110 and time it only took me 2 mins to program my Tacoma control ,.
appreciate you dude....
+omar au staiti Glad to hear it helped!! Now you have the chance to help people in some of earths most dire circumstances solve a problem such as no clean water, no shelter, no medical care, hunger, etc.. TomahawkDIY is a business with a mission. No pressure, but donations are always appreciated. www.paypal.me/TomahawkDIY or Venmo @TomahawkDIY if you want to send one. 50% of donations are sent to help people Build Better Lives in some of earths most dire circumstances (TomahawkDIY.com/about).
Of the tutorials I viewed, you were the only one to mention the side sliding doors. Just as you said I was easily able to get them working. Thanks 🙂👍
Glad I could help!
Worked like a charm, thank you!! I was ready to go pay $130 at Toyota.
So glad to hear it helped you!. Donations are always appreciated. www.paypal.me/TomahawkDIY or Venmo @TomahawkDIY if you want to send one. 50% of donations are sent to help people Build Better Lives in some of earths most dire circumstances (TomahawkDIY.com/about)
This is best video. I used this procedure to reprogram my 2012 Toyota Tacoma key fob. The other videos post don’t work. Thank you!
Great to hear!
Thank you! It was so easy for me to just follow you step-by-step on youtube and successfully programmed two Toyota key fobs.
Glad it helped!
The FIRST and ONLY video that worked!!!! (Of many) Thanks!!!
TOYOTA AURION 2006 - Australia 🇦🇺
It works perfectly well 👍🏻😃
Thank you for great video.
This video also worked for my 2005 toyota carolla. Thank you! Spared me from paying $280 from the dealership.
Your instructions worked like a charm! I'd tried to follow several other and nothing. I followed along with your instructions, Bam! Remote programed!
Thank you!
This helped soooo much! Thank you for posting this! I tried it just like you did and now my fob works again! This was awesome and saved me a tooon of money if I took it to a dealership. $6 for a new battery and this tutorial just made my wallet happy.
I don’t believe you.
You did not provide year & model.
I bought the GQ4-29T with 4D67 chip from Keyless2Go (Amazon) for my 2009 Matrix. There was a number for tech support, but instead I used your directions.
Thanks so much.
I give 5-Stars to Toms Key, but not for getting some new FOBs programmed - Unfortunately, it didn’t work for me! The 5-Star rating is for their service! A few weeks ago I purchased 2 new FOBs and rented the programmer for my 2008 Toyota Highlander. (I recall when I bought the car new that even the dealer had issues with programming the FOBs using their computer). I had a few questions about programming the FOBs and William, from Toms Key, addressed my concerns.
I made several attempts at programming and had a few back and forth e-mails with William. William reminded me on at least two occasions that they back up their products with a 100% refund guarantee. I finally conceded that this was not going to work for me. I packed up the FOBs and programmer and sent them back.
A couple days later William sent me an e-mail saying that my refund was being processed. This is the kind of service that makes a company successful! Even though it didn’t work for me, I’d go back to them first for another car.
It worked for a 2012 Tundra. Thank you!!
After doing it twice, it worked in my Toyota Avalon 2006. Thank you
Great to hear! Glad to hear that it worked for your Toyota Avalon 2006. You're very much welcome! If you have any questions or need assistance in the future, don't hesitate to reach out at help@tomskey.com. Safe travels!
Worked on my Scion XD , Thanks brother
Glad I could help
Thank you so much. I really saved a few bucks watching this video. Worked very well for a Toyota sienna 2009. God bless you!
We appreciate you sharing your great experience using our solution. In case you needed one again, you know where to find us.
Did exactly what you said & voila, 2 remotes configured!! Thanks for simple explanation..
Great! We're really happy that we're able to help you save money and time.
Worked for a 2010 Sienna using a 2004 Sienna remote fob. Brilliant. Thanks Mike!
i imagine most people are watching this vid in a rage.
good thing you have calming music here
worked famously for 2006 Sienna. Received 2 fobs for $15 from Amazon, so this saved around $150 from what the dealer cost would have been for just one. PS - the van has a chipped key.
Thank you so much! First try following your steps as soon as I, heard the click it activated the remotes
Thanks for the review! Glad it worked well.
Very good tutorial thanks.
1 tip if you cover your original key whit aluminum foil you can use to do all steps
Worked on 2014 tacoma:)
Thank you sir!
This procedure worked well for my 2013 Toyota Matrix. Thanks!
The explanation is really well done. Unfortunately, we have a 2008 Highlander and I could not get this procedure to work.
Hi Howard, pls. reach out to us at help@tomskey.com and (801) 877-5752 so we can assist you
Worked for my 2009 Toyota Tacoma. Ty so much for making this video!!!!
I just followed along with the video. Worked perfect the first time. Great Video! thanks.
Check!! Works for 2003 Toyota Highlander. You're brilliant, and I appreciate you sharing your knowledge, and saving me $$
This totally worked and made my day! I can now open up my truck door for my girlfriend. Thanks bro!
LOL 😂 excellent first time on this channel awesome my only problem is the music it wasn’t annoying but it made it difficult for me to listen to the music and listen to you at the same time lol but it was excellent thank you 🙏
It works for my 2004 Toyota Corolla thank u so much u did great job I save 100$
Gid bless you mike .....yesterday mine stooed works ng on tacoma 2011.....i was readdy to go to mecanic and pay money.....luckelly i just folowed your video and it works.....thanks
I purchase a 2009 Tacoma few days ago and I went through this process to program a new remote and it didn't work. I noticed there was a blue blinking light near the bottom left panel where hood release latch was. It occurred to me that the previous owner must've installed a after market car alarm. Having said this, would this interfere with programming the new remote? Thanks.
Awesome video, Mike. The videos on your channel have helped me more than once with our 2009 Sienna. Thanks much!
و
Did not work on 2010 Tundra. Maybe needs the Dealer-lock thingy. But thanks for a very detailed video.
I made a video to help you. ua-cam.com/video/txS86YONP3U/v-deo.html
Awesome video man ... got my remote done in less than 5 minutes.
+vinnie lien So glad to hear it helped you! No pressure, but donations are always appreciated. www.paypal.me/TomahawkDIY or Venmo @TomahawkDIY if you want to send one. 50% of donations are sent to help people Build Better Lives in some of earths most dire circumstances (TomahawkDIY.com/about).
This worked for my 2012 Tacoma. Thank you!
Great to hear!
I've not seen that before where lock/unlock work but the other buttons don't, unless there is a problem with the power assist to the doors. I presume the side and rear door y open with power assist when you push the buttons built in near the driver seat to open them?
Hi mate, I have 2 used remote which I keep when my 2010 Camry wrecked in an accident. It's exactly as same as you have got.
Now I bought a Kluger 2010 model and it has same remote.
Can I program that used Camry remote to the Kluger.
Thank you! I followed it step by step and worked for my 2013 Toyota Tacoma
Good Vid! I watched a couple of these vids and this also worked for my Toyota Avalon 2007. I suspect they have the same programming as the Sienna, at least, they have the same engine! :) Great times, used the Link you provided, worked flawlessly when I got my model vehicle. @ $35 to get a new set of remotes! Because there's some Good times when you can DIY!
Worked for my 2006 toyota tacoma. Thank you
Excellent video -- how would I do this for my 1999 Toyota Camry CE?
woooo hooooooo!!! I have a 2013 Tundra and it worked on my two key fobs!!! thanks youuuuuuu!!!
+Juan C. Bribiesca thanks for letting me know it worked on your vehicle. I didn't have that one on the list yet. So glad to hear it helped you! No pressure, but if you want to, you can leave me a tip via www.paypal.me/TomahawkDIY.
nice!! did you repeat the whole programing process for the second remote?
I have a 2007 Highland but it works after the 4th attempt. 🙏 thank you!
This works for a 2014 Toyota Tacoma! Thank you!!
Worked like a charm. Thank you 👍🏼
2007 Tacoma TRD Sport
Worked flawlessly on my '07 Toyota Matrix XR..Thanksss sooo muucchh...
+Ron Mainne So glad to hear it helped you! No pressure, but donations are always appreciated. www.paypal.me/TomahawkDIY or Venmo @TomahawkDIY if you want to send one. 50% of donations are sent to help people Build Better Lives in some of earths most dire circumstances (TomahawkDIY.com/about).
Did not work on 2003 Sequoia
FYI: Another you tuber stated, "If your ignition key is marked with a G then you must have the dealer hook it to their tech machine and have them program the key fob."
Worked on 2004 Sienna thanks!🌞✨
Thank you for sharing your feedback! Glad it worked for your 2004 Sienna.
Thanks so much Mike...You saved $100 for me. Works good with my 2010 Toyota Sienna XLE.
Worked a treat, first time, thanks 💪👍
Glad to hear it worked smoothly for you. Thank you for trusting Tom's Key Company
Wow worked on my 2013 Scion XB, thanx mein 😊
Glad to know it worked for your 2013 Scion XB. If you have any more questions or need further assistance, feel free to reach out. Thanks for choosing Tom's Key Company!
Nice explanation. Is there same method for 2011 Rav4? I already have one key. In case of failure to setup program in new key; will this impact to existing working remote key? Thanks
Hi, not sure if you have a push button or not, but you may check this link to find your vehicle, we have a related video for the push button start tomskey.com/pages/toyota#rav4. Alternatively, you can reach out to us at help@tomskey.com for assistance. Also, this just ads a new key. No existing keys get erased
Very helpful video, really appreciated your heads up warnings & tips. Keep up the good work. As a suggestion the background music was distracting & too loud making it difficult to hear you.
Omg you rock man thank you! It worked for my 2007 Toyota corolla.
Mike i only have the 2 original keys that contain the transponders. I see you are using a key without that. Can i still use these keys? Its just my one fob that is failing.
Thank you very much, hope you have wonderful Thanksgiving
Worked on a 2007 Toyota Solara! Thank you so much!
This worked perfectly and quickly! Thanks so much!!! Do you know how to get into a 2005 Toyota glove box without using the open handle? Either the lock tab is stuck locked or something is blocking it from opening from the inside of the glove box. Thanks.
Thanks for the video. I followed your instructions and got to the car into programming mode, pressed both the lock n unlock buttons on the remote, pressed the lock button but the car locks didn't cycle. I have done this severally to no avail. What could possibly be wrong?
Worked on my 2006 Tacoma. Thanks! Now, I can trash the factory fob. I’ve tried programming it but it wouldn’t work.
I programmed a spare remote for my Sienna perfectly. Only problem is it deactivated the original remote that was in the house. Any thoughts.
Try repeating the procedure with the original remote. If that kicks out the new one you program, try clicking the Lock/unlock then lock buttons on both remotes after doing the procedure
This works perfect on a 2007 FJ Cruiser! I had an issue where it would cycle twice instead of once and then not work - but I just wasn’t doing it quick enough was all
Worked perfectly on my 2012 Tacoma. Thank you!
How about for a 2016 Toyota Tacoma???
Hello I am watching you read the sequence of instructions on your lap. With the car tones and opening and closing the door, I can’t keep up with you. Would you please post or email the steps you are reading from? Thanks
Hey mike, I have a 2011 Toyota Highlander, It is the same key model, but when finished turning the ignition on and off. The door does not open and close.
Thank you. This really saved me money. ♥️♥️♥️
So glad! You're welcome
Thank you so much. It worked for my VIBE 2005.
It worked on my 08 sienna. Thanks a lot!
Ey usaste la llave original para programar el control?
Thanks. Was going to spend so much more . It Works
Thanks so much! worked perfectly on a 2008 Toyota Hilux
it worked. thank you for great instructions
It worked for a 2007 Camry Solara. Thank you!
Works, but now the lights don’t flash to let you know when you unlock an lock the doors. Any idea why? Also, I have a 2005 Toyota Avalon
Thanks Mike it worked on my 2009 Toyota Kluger
great video. followed your steps and it worked perfectly.
So glad to hear it helped you solve a problem! Now you have the chance to help people in some of earths most dire circumstances solve a problem such as no clean water, no shelter, no medical care, hunger, etc.. TomahawkDIY is a business with a mission. No pressure, but donations are always appreciated. www.paypal.me/TomahawkDIY or Venmo @TomahawkDIY if you want to send one. 50% of donations are sent to help people Build Better Lives in some of earths most dire circumstances (TomahawkDIY.com/about).
I went very fast on 2008 Camry with almost no break, and could not get it into programming mode ( no door lock cycled). I will try to slow it down like what you do.
Is it work?
Perfect for my 2006 Highlander! Thanks!!!!
Worked on Aurion 2009 in Australia
Thank you
Hi Do you have a video on how to programme the transponder key once cut? (Say you want an extra key) ?
Worked like a charm thanks. Up up down down left right left right b a start. XD
So easy ....thanks
Worked fine just for the sliding door
Best helpful demo
Thank you so much! It worked for my 2005 Toyota Solara!!
Jonathan did you use your original (with the transponder) key when programing the fob?
Hey Tom,
I'm getting a doubled lock/unlock cycle after I complete the programming, and the setup didn't work. Have you had a case like that?
Hi Phil, kindly contact Help@tomskey.com and (801) 877-5752. Customer Service aims to respond within 1 business day.
I have the 2002 toyota tundra and i need a remote can i get one off of amizon or something and if so will this work for the tundra or is it different?
Hey Mike. I have a 2020 sienna I just bought and need to program my Amazon fob. This way did not work. Do I need to rent your programmer kit? Gina
Yes. Toyota stopped this method from working on vehicles starting about 2010. That led me to start TomsKey.com so people have an affordable way to make new keys and Fobs.
Hi, cannot seem to find a way to program a Keyless Remote control for a highlander 2008... ...help?
Im am sepeachless as i try this for my camery97 !!! I now have thge key and 2 remotes... The wireless contrapment i bought didnt even work this was done once and verry successful!?! All i can asay is thank you and how did u obtain this info!?
2007 Tacoma works perfect. Thank you sir for the video your the man 👍👍👍
Thanks dear it works perfect for me
We appreciate you sharing your great experience using our solution. Thank you for trusting us 😊