DIY $20 Push Pole

Поділитися
Вставка
  • Опубліковано 12 лип 2024
  • Спорт

КОМЕНТАРІ • 11

  • @markluke8447
    @markluke8447 4 місяці тому

    Cajuns of Louisiana have made and used push polls for hundreds of years. They used wooden polls and attached wood on one end to increase the surface area when pushing in the soupy mud or when paddling in deeper water. Their boats were perogues, shallow draft wooden boats smaller than canoes.

  • @TheBigghunter01
    @TheBigghunter01 4 роки тому +4

    You can also use 1 1/4” pvc and slide in 8’ sections of wooden dowels (made for closets) to stiffen it up.

    • @TheBigghunter01
      @TheBigghunter01 4 роки тому

      Also, use a T on one end with 3” piece of pipe and caps to push into sand.

  • @caster2534
    @caster2534 3 роки тому +2

    Get you a piece of long joint bamboo. Once it dries, put a coat of finish on it n it will last for years.

  • @EseMrGarcia
    @EseMrGarcia 4 роки тому

    We use an electric conduit pipe , cost us like 10$ to make it and its stronger then a PVC pipe. Should check it out

  • @chrisc5726
    @chrisc5726 4 роки тому +3

    Most important thing you didn’t say, pipe diameter and pole length.

  • @sache9812
    @sache9812 3 роки тому

    Hi man, what’s the length of the pole and pipe diameter you use it? Thanks

    • @IssacHunts
      @IssacHunts  3 роки тому +1

      It’s around 17ft but my boat is 14ft. And it’s 1 1/4 inch.

    • @sache9812
      @sache9812 3 роки тому

      Awesome! Thanks

  • @redrock57
    @redrock57 Рік тому

    You need to adjust your camera next time.