Filling Gaps for Cheap on 3d Prints | Groundeffected.com
Вставка
- Опубліковано 9 лют 2022
- I found a cheaper way to fill gaps thanks to comments on my videos. This video will tell you a cheaper product for filling gaps in 3d prints and for more in depth on how to do the process you can watch this video: • Your Prints have Gaps,...
⭐️Huge Thank You to My Patrons: / groundeffected
MERCH Now Available! - groundeffected.com/product-ca...
🔔 Find me on SOCIAL:
Instagram - / groundeffected
Facebook - / 548001063221083
TikTok - / groundeffected
Discord - Available through Patreon
Website - groundeffected.com/
🎨 Supplies: elementgames.co.uk/?d=10734
🖌️ LIST:
▪️ The Army Painter Wet Palette: amzn.to/3x1VmIN
▪️ Vallejo Black Primer: amzn.to/3PLtpMv
▪️ Bamboo Synthetic Kabuki Brush Set: amzn.to/3t09Ru5
▪️ Tenacious for Strengthening Prints: amzn.to/3CTSU6X
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3a3233S
▪️ Vallejo Fairy Flesh Set: amzn.to/38pbUAT
📍 Check out ROXY ROSE!
_roxy_rose?utm_...
vm.tiktok.com/ZMLxUenru/
📌 Playlists to Watch!
Brush Control:
• Brush control
3D Printing:
• 3D printing
Painting:
• painting
📌 Other Videos You Might Be Interested In Watching:
What happens when you stroke your brush? Important knowledge!
• What Happens When You ...
I painted a 3d printed Djinn and her pet
• I Painted a 3d Printed...
Using powders to enhance your hobby?
• Using powders to enhan...
How to change FEP sheet for resin 3D printer
• How to change FEP shee...
#3dprint #3dprinter #3dprinted #3dprinting #acrylicpainting #paintingspiderman #resinfigures #resinfigurepainting #spidermanps4 #spidermanps5 #3dprinting #3dprinter #painting3dprints #miniaturepainting #howtopaint3dprints #3dprinted #howto #brushcontrol
Music by white bat audio
Technical mumbo-jumbo below:
---------------------------------------------------
Related Phrases:
How I painted my 3D print / Spiderman, 3D Print, 3D Printer, 3D Printed, 3D Printing, Acrylic Painting, Painting Spiderman, Resin Figures, Resin Figure Painting, Spider-Man Ps4, Spider-Man Ps5, 3D Printing, 3D Printer, Painting 3D Prints, Miniature Painting, How To Paint 3D Prints, 3D Printed, 3D Printed Miniatures, Mini Painting, Resin 3D Printer, 3D Printed Minis, 3D Print, Paint 3D Print,
Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your own research.
Amazon: Groundeffected is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission fees. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Copyright Notice: This video and my UA-cam channel contain dialogue, music and images that are property of “Groundeffected”. You are allowed to share the video link and channel, and embed this video in your website or others as long as a link back is provided.
© Groundeffected - Навчання та стиль
I have found recently that if I use all purpose wall filler (spackle) from a pound shop along with cheap superglue over the filler to toughen it up then sand I can get most gaps to cover nicely.
Without the superglue, the sand paper can sometimes eat into the filler and make the gap noticeable again.
Oh, this is awesome. I recently got into 3-D printing and I want to start making my own figures and now I know how I can fill the gaps. I’m definitely gonna use this method.
Hi Dad. I use Selleys Spakfilla Rapid in my models. When I first came to Sydney Australia in the early 90’s I noticed that due to the clay soil, extreme changes in temperature created cracks in the internal arched doorways. Selleys Spakfilla Rapid was the only product to create a great finish but was also elastic enough for seasonal movements.
It does dry a little chalky but it sands well and takes a proper paint finish.
As a cabinet builder for over 20 years.. the white paste wood filler will shrink and can crack as well.. glazing spot putty won't and here is some FYI when you use the wood filler.. keep a wet sponge handy... you can wipe the white putty and will smooth it with a lot less sanding...
Never thought of using wood filler to fill in gaps. This was a great idea plus a bit less expensive compared to the milliput. The amount you get in the tub is great also. Great video, loved it.
I used to use wood filler a lot on my larger props like helmets before moving to glazing spot putty but never really thought about using it on the figure models, awesome vid 👍🏼
I never thought of it till it was mentioned in the last gap filling video. But now it’s gonna fill a gap I had in the gap filling department
Wood filler definitely has its uses. Glad to see the channel growing!!
Thanks dude. I’m glad we growing too!!
Great vid bud, and good cost effective way. Love using wood filler, just so much easier in sanding and hits the gaps well. Keep up the great content bud
Thanks dude. Yea. Really great way to fill a gap that was needed haha
wow super value video, liked and subscribed, thank you! Found "quick filler for roofs" in my local shop for 5 euro, 1 kg, while milliputty costs 7 euro (10 with shipping) and is 0.114 kg. And I only need filler for smooth surface and wavy sides from fdm print, will try tomorrow.
I've tried Filler before and I find Epoxy Sculpt to be my main goto now, it's just so much better imho.
Yes, wood filler works great!!! Back when I've built models. Depending on the gaps size I've used CA glue, wood filler, bondo, and of course the hobby products. Green stuff, tester's putty and Tamiya's putty. Not only this video is informative but best part, my name was mentioned...LOL
Haha man I have built many different types of models including scale models that I flew with remote controls. And there’s always something for the job. The hobby stuff usually works well but costs so much more because it’s for hobby but general purpose stuff from the hardware isn’t specialised so costs so much less. Hopefully I don’t mess up the pronunciation!
I do use a similar product ‘ stucco in pasto’. Which is basically the same thing but it doesn’t stink. Till now is still works great but only time will tell if maybe cracks will show.
Awesome. I would like to see a preperation video. Picking a model off the supports and fill, wet sand your models too. Basically showing us the level you prepare your models to for painting. It won't be the most sexy video but it would be really useful.
Ok. I’ll try make a video like this soon as I can
Iv had good results so far mixing Resin with Baby powder until very thick, it sets with UV light in seconds and is rock hard.
does it affect the paint job with either lacquer or acrylic paints? thanks for the tips
Solid video, dude! I’ll have to give that filler a try! 🤘🏼
Thanks dude. Yea I am pretty happy so far with its capabilities
I've heard great things about wood filler! I've also heard of a technique to turn wood filler into filler primer. Basically you just take wood filler + mixing medium (I think gloss floor polished was used) + thinner (not sure about ratios). As long as the wood filler is water soluble and thinned down enough it can be sprayed through an airbrush. Pretty cool application, though if I need filler primer I'll just use a spray can of it so I haven't tried this.
Yea it stinks I’d imagine not very good for lungs and stuff if you do spray it. But a spray can of filler primer is probably just as good to be honest. Really was sceptical about this at first. But it’s really great stuff for me.
A channel called Star Forge has a recipe and video for taking wood filler and making it into a sprayable filler. Works pretty well but it’s more for larger props and needs to be sprayed out of a lvlp gun. Also has a recipe for a pretty decent acrylic thinner.
That sometimes happens but il just go over the seems again till it’s full covered/flat.
You can get epoxie sculpt or magic sculpt in a 1lb pack (8oz hardener / 8oz resin). Pretty much the same thing as milliput just larger quantities, which ends up costing less per oz.
Good to know. Wonder if it’s cheap enough in uk. I mean everything is almost twice the price over here.
Using wood filler is a great tip!
Really is glad I found this out!!!
One way that can be used to make milliput a bit cheaper is mixing with plastiline 1/3 of plastiline into the mix works well
Good idea. I like.
If you mix milliputt with alcohol you can paint it on as well. Fill the big gaps up with it normally then use it as a putty/slurry over the top.
I’m sure I said that in this video? Or it was another one but I’ve showed that before, works really good like that.
@@Groundeffected I did see that in another video of yours! Thank you for your videos, I love your style!
Great video! Not so much a gap filling question Brent but can you suggest a product to repair broken parts. Need like a pilable putty like thingy that hardens enough to sand. and paint. Thanks Buddy!
That sounds like you need milliput. Theo part epoxy putty that hardens and can be sanded. It’s not strong for flying parts together but if you made the part then glued it in it’s good!
Another informative video
Thanks very much my dude.
Cool video as always! What do you think about air drying clay instead?
I imagine that would work just as well. Probably more expensive though. And also long wait times for drying. But would work.
What paintbrush did you use? I’m assuming it was easy to clean? Did it impact the quality of the brush after cleaned?
Thanks for the video, I actually bought milliput after watching the other video, I have one question, however, how does it look after you prime the figure? I mean, is it noticeable that you filled a gap? 'Cause that happened to me this week after I filled a gap with milliput, so I'm not sure what should I be doing to smooth it out.
Yea I use water and a tool to smooth it out and sand it when it’s dry
Ive experimented with air dry clay. Works decently. Powdery tho. Nothing water cant clean
Incre channel ! I really love your sense of humour 😉👍
Thank you. And thanks for watching
@@Groundeffected ☺️ I meant to say incredible*. Great content, I just started 3d printing models and need to learn how to paint them😂 …and everything else I guess as well
Noob question: I have an fdm printer (Creator Pro 2) and want to start printing and painting such statues. Judging by the size of your prints you also do them on an fdm printer (correct me if I'm wrong). If yes, are you smoothing them in any way beforehand?
All my characters are done on a resin machine. Even the really large ones. Fdm only for very simple bases. And then I sand them ☺️
how do you clean the residue afterwards? do you sand it after it dries?. Nice tip btw. do you fill yours prints with something to make it stronger? i as thinking of filling it with fine sand..
I didn’t fill anything just wood filler in the gap and sanded once dry. To be fair I’ve used milliput all this time and that stuff is pretty brittle so it’s very comparable
could you use that cem metal stuff witch you get from like pound-land
Um. I dunno. I’ll keep my eye out for it and if I see some I’ll try it but I dunno that stuff 🤷🏻♂️
Mix the filler with flour thicken it up and it's easily sculpt able. If you do have some sawdust laying around that works too.
Great to see you've put those liquid mask brushes to good use too. Lol.
lol this brushes are better suited to this than liquid mask hahaha. Thanks for watching!
What advice would you give for dealing with support holes? Sand em into shape or fill em or both? Did I miss a video where you touched on this? Appreciate the work
I just uploaded a video that is pretty much about this.
@@Groundeffected that was pretty good timing on my part. Thanks
@@pmpnak1238 hahaha yea. The universe has its ways haha 😂
Do you have videos on how you print your figures? I know you mostly cover Painting
There’s a printing playlist. I don’t do too many of them as they usually don’t do very well on here…
I just use resin mixed with baby powder and blast it with UV
I knew when I commented that it would help
First and wood filler are two different types of fish.
Hey, I love your channel! Keep pursuing your dream and keep making videos, I would sub to your patron but I have no money lol 😂. Keep it up tho I’ll be watching every video I can
You don’t have to sub! This comment is support enough not everyone can afford it and that’s fair! But the content will always be free here so enjoy dude! Thanks for watching!! Make sure to like …..or dislike 🐬
great video i think you will go a long way if you carry on . can i suggest turning the music down to match your voice . this can be done nearly automatically in adobe premier or DaVinci resolve (free version). it seems like you're trying to shout over it .
This i is a a pretty old video. At the beginning of my learning curve. I think my latest videos are a better representation of my skill
6:47 you're welcome lmao
Lol had me laughing Even
Where is the STL from?
From 3d wicked!
Aww yeah! Wood filler :P sometimes the stupid cheap options are the best haha
Man. Only took me this long. Because the groot base needed so much filling no way i had enough milliput. So was perfect time to try it.
@@Groundeffected lets be honest. you just wanted to use wood filler on the wood character because its the right thing to do :P
@@ashthundercliffe it really was the right thing to do.
ok so what is it called?
The one I got is just all purpose ready mixed filler that what it’s called
Not saying I disliked this video, but it is a helpful tool. Sometimes, while you enjoy a creator/channel, you come across a video that is total rubbish and it's good that they learn to keep their subscribers engaged. That's just my two cents though. Love the filler tip!
Firstly thank you for watching. What would you say, in your opinion would make the video better? Interested in making my videos as good as they can be so your input is definitely taken on board as with everyone’s
Here
Where?
The most humorous part of this video is that you have never used that filler for it's intended purposes. So obviously house painting is not a painting you have yet to master!
Haha 😂
First
Good stuff phil. You show that contrast!