How Thin is Too Thin when Thinning Paints ? | Groundeffected.com
Вставка
- Опубліковано 1 чер 2022
- In this video I show you how I paint skin tones down to how I thin the paints and how I add glazes and layers to create my skin tones.
⭐️Huge Thank You to My Patrons: / groundeffected
MERCH Now Available! - groundeffected.com
🔔 Find me on SOCIAL:
Instagram - / groundeffected
Facebook - / 548001063221083
TikTok - / groundeffected
Discord - Available through Patreon
Website - groundeffected.com/
🎨 Supplies: elementgames.co.uk/?d=10734
🖌️ LIST:
▪️ The Army Painter Wet Palette: amzn.to/3x1VmIN
▪️ Vallejo Black Primer: amzn.to/3PLtpMv
▪️ Bamboo Synthetic Kabuki Brush Set: amzn.to/3t09Ru5
▪️ Tenacious for Strengthening Prints: amzn.to/3CTSU6X
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3a3233S
▪️ Vallejo Fairy Flesh Set: amzn.to/38pbUAT
📍 Check out ROXY ROSE!
_roxy_rose?utm_...
vm.tiktok.com/ZMLxUenru/
📌 Playlists to Watch!
Brush Control:
• Brush control
3D Printing:
• 3D printing
Painting:
• painting
📌 Other Videos You Might Be Interested In Watching:
What happens when you stroke your brush? Important knowledge!
• What Happens When You ...
I painted a 3d printed Djinn and her pet
• I Painted a 3d Printed...
Using powders to enhance your hobby?
• Using powders to enhan...
How to change FEP sheet for resin 3D printer
• How to change FEP shee...
#3dprint #3dprinter #3dprinted #3dprinting #acrylicpainting #paintingspiderman #resinfigures #resinfigurepainting #spidermanps4 #spidermanps5 #3dprinting #3dprinter #painting3dprints #miniaturepainting #howtopaint3dprints #3dprinted
Technical mumbo-jumbo below:
---------------------------------------------------
Related Phrases:
How I painted my 3D print / Spiderman, 3D Print, 3D Printer, 3D Printed, 3D Printing, Acrylic Painting, Painting Spiderman, Resin Figures, Resin Figure Painting, Spider-Man Ps4, Spider-Man Ps5, 3D Printing, 3D Printer, Painting 3D Prints, Miniature Painting, How To Paint 3D Prints, 3D Printed, 3D Printed Miniatures, Mini Painting, Resin 3D Printer, 3D Printed Minis, 3D Print, Paint 3D Print,
Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your own research.
Amazon: Groundeffected is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission fees. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Copyright Notice: This video and my UA-cam channel contain dialogue, music and images that are property of “Groundeffected”. You are allowed to share the video link and channel, and embed this video in your website or others as long as a link back is provided.
© Groundeffected - Навчання та стиль
A year later and this video is still so useful. Your painting astounds me and i aspire to be on your level.
Another bit of magic by the wizard. Phenomenal job!
Thanks so much
Nice man. Thank you for this and the rest of your content, one of the best on UA-cam at present.
Thank you for watching my dude. Much appreciated
Great video my friend keep em coming
Excellent video. Explains the process so much better
I hope so. Just I guess an addition to the previous videos.
Forever grateful for the video. The guide to paint skin is great
Haha great to hear. Hope it helps!!
Another great video full of useful information 😃
Glad you think so dude. Thanks for watching.
awesome as usual, great instructional video dude :) thanks again as always.
Thanks dude. And thanks for watching!
Very instructive video dude! Congratulations !
Thanks dude. Glad you liked it.
You answered my thinning paints with question in this video and for that, I am grateful!
Hahaha awesome that’s great news
Nice one dude!! Thanks for the video
Sure thing bro.
very nice print tips was helpful aswell
Sweet my dude.
Great tutorial
Wonderful job brother!
Thank you my friend.
Thanks for the vid dude…you da man
No problem dude!
Awesome content
Thanks dude.
F**kin awesome again!!
Thank you dude
Ive airbrushed off and on for the last year and I can say what matters is the quality of paint because it affects how well you can thin the paint.
Thinning the paint is what turned me off to airbrushing.
Spiderwebbing can be dealt with easily by maintaining a certain distance from the model while spraying.
As long as the paint doesnt run or pool, you are on the right track. Great video.
Great video again dude. What clear coat do you use for your pieces? Thanks.
I just use a spray can clear lacquer matt
Thanks a lot for your video. It is very useful for me, exactly what I try to do : 3D resin and PLA print of the model, airbrush and painting. Do you think we find your acrylic paint in France ? I use a lot StardustColors and Scminkle. Kind regards from Paris. Eric
Groundeffected youtube take over initiative has begun
It has begun!
Another great video, to how much pressure is your compressor setup? Out of curiosity , to make sure the layering is effective.
I range between about 10/12psi all the way up to 25psi
Great work man, your results are always awesome. Quick question, do you prefer satin or matt clear coat for protecting the skin's paint job?
I prefer matt. But it depends on the texture sometimes you want a shiny section etc.
How you did the green jewels effect? It's very nice.
I always enjoy your videos. Just curious... what do you do with all of your prints? That is the one thing that stops me from printing more... I do not have room for all of these wonderful models!
A lot of what you see is commissions so they end up going to the people who have requested them to be made.
I love your work! For someone that doesn’t have an airbrush, can you do this with regular brushes?
Yes definitely here’s a video of exactly that. ua-cam.com/video/_D7SylAFXRs/v-deo.html
Awesome
super helpful as always man. just curious what size nib you are using for this stuff and what you set your psi to. i know its different per brush etc but just to get a ballpark figure of how low you go :)
I use .05 I’m pretty sure for almost everything if I were to do miniatures I’d go smaller and I use around 15-25psi go up and down according to how to paints behaving etc.
Great video bud :-) I an still pretty new to airbrushing but I keep my paints pretty thin but I think Il go even thinner with them :-) I am still really careful with it as I am new ha but I do keep my paints very thin when I use a brush, It takes longer but the effect is worth it even with a brush :-)
Yea defo worth it to take your time and build it up layer by layer
Great video yet again. What size needle you using?
.5 needle dude.
@@Groundeffected Cheers. Thanks Dad
verry nice
Thank you
Brilliant Finally someone who really breaks down the painting of flesh step by step and in great detail TY
Link to but the STL? I'd like to print one.
It’s a private commission unfortunately the files aren’t available. Sorry dude.
Unfair I only just got notification 🔔 😂
Well you still got to see it.
What colour do you use as your first coat before doing skin tones.
Black because I’m crazy haha.
Where can i purchase the files for this model I looked for the link in description and did not see it?
You can’t buy this one unfortunately. It’s an exclusive sculpt for Djinnwars
Would the purple colour work if it wasn't through an airbrush?
Yes. I’ve done a video with no airbrush which may be worth a watch I’ll link it for you here. ua-cam.com/video/_D7SylAFXRs/v-deo.html
@@Groundeffected thanks man, will give it a watch later.
Hope you're enjoy your hobby break abroad doing some tattoos.
Where do you get these sculpts?
These ones are exclusive. Customer had them sculpted for themselves.
One more question... when you thin your paints down that much, do you not find that there is an adhesion issue? When I thin my paints too thin - and that is WAY less than your thin - the paints tend to flake off much easier!
Never had any flaking issues at all. And I thin them down to nearly water make sure to seal them in if you are using thin layers.
Do I thin my paints the same if using the brush?
Yea pretty much the same to be honest. Here’s a video of me using only a brush ua-cam.com/video/_D7SylAFXRs/v-deo.html
@@Groundeffected Ahh..ive seen that one. Great vid. But I'm curious about when painting large areas of skin, cuz so far for me that's been the most challenging part while only having access to brushes. It just doesn't come out silky smooth, there are areas that have this chalky texture...idk if the problem is my brush or my paint >_
@@PuffySofty have you tried a medium? Because maybe your paints are breaking up?
Some words down here
Thank you for the words.
Am I....could I be....is it possible....First.
Doesn't count only counts after premier
@@hicontrast Noooooo
I accept your first!
what your name is not your dad? you lie to us in the future? D= , the betray D= xDD