Ford Focus Quarter Panel Dent Repair
Вставка
- Опубліковано 29 сер 2024
- Check out my playlist for all the other repair videos.
Song
Supersonic
Artist
Rob Gasser
Licensed to UA-cam by
AEI (on behalf of NCS); LatinAutor, Featherstone Music (publishing), UNIAO BRASILEIRA DE EDITORAS DE MUSICA - UBEM, LatinAutor - SonyATV, and 1 Music Rights Societies
Song
Let's Go!
Artist
Lensko
Licensed to UA-cam by
AEI (on behalf of NCS); Featherstone Music (publishing), ASCAP, and 9 Music Rights Societies
Song: Ship Wrek, Zookeepers & Trauzers - Vessel [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Ship Wrek, Zookeepers ...
Download/Stream: ncs.io/VesselCr
I am 66 years old and you are quite a craftsman. Amazing detailed job!
What does age have to do with skill?
I hope you take my critique well and know I'm trying to help. The filler should only be used to take out deep scratches and small pinholes, and not to fill up dents. I can guarantee it will crack over time! You need to take out as much of the dent as possible!
Bro your tape technique for the body line was insanely useful thank you🙏🏻
Great video could you update the description to include the tools you used? It would be helpful for future viewers
Great job man! Definitely inspired me to attempt similar repairs.
How did it go? 😂
@@Gribootvod still need practice 😂👌
@oclopez7008 did it look better than the dent? That's all that matters lol
Great job I 👍 like.your taping process for making the lines. Awesome thank you
That was a nice job.I need to do a less serious repair and hope it turns out half as good.
Bom trabalho de reparo.
Good job...I have a nice dent in my Ford Focus SE I plan to fix as well.
Good video, you got a new subscriber.
I really need this done on my car wow great job I’m in the dmv area if you close man great job
Great job! I have a 2014 Hyundai Sonata limited the rear ended passenger side fender is cracked I would like to see if you can get it fix but unfortunately I don’t think 🤔 you are close to me I’m in Florida 😒 so I’m going to have get it done here somewhere else… I really like your job seems that you have a lot of work experience and that’s good 👍 keep doing what you doing! Nice video!
Really good finish
Great repair
Great job man! Liked subscribed 🙌🏽🙌🏽🔥🔥🙏🏽🙏🏽
Tool list plz
Hi, why is the fibre glass filler at the bottom? Is it better to use rather than applying a thick filler???
You don’t want to use fiber glass filler as your showing filler because it’s not as smooth and won’t show well when painted. The fiber glass in it makes it rough and uneven
Why you did not try hot glue system? it might have worked on your car....
Question for VSM Auto or anyone reading. I see similar body repairs on other cars and the paint looks blurry where it was fixed, but the rest of the car looks smooth. VSM's job is shiny through and through with no blurriness or dull areas. Can anyone assist with an answer?
@@orion0923 just the way you paint, others that are dull are using poor quality clear too
keep up the work, i support you with like and subscribe, go get the better tools soon, more power to you bro, i feel the hustle n hards work. i do my own repairs also coz im a car enthusiast, but i also lack tools a lot of times, just soundproofed my car doors.. keep it up!
what was the yellow tool at the start that you used to weld the barbs on
Don’t get me wrong you did a nice job but I think you should of built up the gap on the quarter
Got a sub from me buddy thanks for the info😅 made a oopsie last night with my Z
Great work!
Good job ! 👍
Wonderful job thanks for sharing✊👌😎
liked subscribed boom
That is amazing work! I'm trying to do something similar on my 240sx. Danggg
Would have been nice to get a bit more instruction on what grit of paper you were using and the products. I have to do something similar for my old car repair but not many videos actually on UA-cam with something this size of a dent and complexity to repair.
Nice job though!
Thank you! And yes I can prob make some more instructional in the future, check out a few of my other videos
That looks good
OMG...that music ! Scary, I gotta go
Love it ❤
Nice work, bro!!
Do you think that HF dent puller gun can pull out a crushed door jamb? Im thinking not but figured I would ask... its probably just for thin sheet metal.
Most likely not, my puller stick eventually went bad, it will weld the studs on but you’ll need something stronger to pull it out
Для США наверно нормально такое кол.шпакли ,у нас с толщиномером проверяют, такоe точно не пройдёт
Did you seriously just fill in the huge dent at the door jam with filler?
Damn. Do mine for me. Same car, same color. Serious. Where you at?
When you did the fender lines, you had the tape over the fender and sanded both down at the same time. It then skips to where it's off and you have a perfect fender line. How did you do that bit?
You just follow the tape you pulled and sand an even amount on both sides. It takes a lot of practice to get that right and even I still struggle with it
great job...do you have previous experience of bodywork...looks professional?
I have some! but that can def better but thank you!
@@VSMAutoLife I thought so...no way am amateur /novice could do that straight away..and not mess up lol
How much you think would a body shop repair would charge to do that ?
That's good I use to do panel beating before but I forgot what am doing i need help I buyed a frv family car it has a rear panel and rear door damages what grid I need to rub down get the shine off? And please I need ur help thanks
Use 240-320 grit to remove shine for primer, use 80-120 grit to strip paint
Awesome fix what is the tool that you mentioned you rather have then the harbor freight one?
stud welder kit
aint good work dude.
8:50 isnt looking good
and waaaaay to many fiberglass.
In like 5 years they have to rework it.
It’s not meant to be perfect, but it looks a lot better than what he started with
Where are you located? I have the same problem with my corolla.
I don’t do side work, just my own projects
What you would pay for 2 iPhones or what I'd pay for 2 iPhones? To me iPhones aren't worth but a few bucks
I’m not sure, Lol really random question
U need more subs
Hey bro this really helped and I was thing of doing mine myself can you link to all the parts you used
Of course, I’ll try to add that in, but I want you to just look on amazon! Everything you’ll need will be on amazon or eBay! Also your local Home Depot or auto bodyshop send me a comment for more help !
What’s the tool to melt the thing in there called?
Stud welder
Is it possible to push the dent back out without the machine u used to poke in holes? I have a dent in my quarter panel and I don’t have $1000 to fix
Very unlikely , you can try paint less dent repair but that’s limited
That spot welder is 100 bucks at harbor freight
Wow great job man is there a way I can contact you to help guide me with a repair
Where are you located??? I need your assistance I will pay good money
Whats size/ brand compressor??
You wanna help me fix my focus? Same problem😅
Great video but the music was annoying to me.
Hi , what type of filler you use? is it fiber glass filler
Yes both fiberglass reinforced and regular, finish with glaze
@@VSMAutoLife if i used normal filler on dented area about 0.4cm. is it ok or it can crack ?
normally how long normal body filler can last before crack? 1 year ? or more
if i used fiberglass filler on dented area about 0.4cm it will last longer?
I have the same question can you tell me answers
How much did this cost the customer
This was a personal car
you must be joking 😂😂😂
Spend a bit more time on pulling metal out
How much of the car did u clear??
The left side exempt fender
@@VSMAutoLife thanks..✌
Better off taking it to a shop instead of repairing it at home and only doing half a job
Very very bad😢
what was the yellow tool at the start that you used to weld the barbs on