Looks like you’ve done this many times. Nice job, I’ll have to get a spot welder leaves it cleaner looking ,currently mig welding everything myself but it’s more time consuming
We just did this to a 2019 Honda Odyssey. Granted the sliding door had to be replaced and fitted as well, but the repair was roughly $8200 so for this older civic, no door damage. Probably closer to $3800-$4400 depending on the availability of that paint
Great video. Why do you put those backer plates? And can i ask u why when i line up the panel and weld it to the rocker the weld itself closes the gap slightly between the door and the quarter panel. Thank you in advance.
Curious… ballpark cost on this? My ‘12 civic si coupe has taken a beating of dents n rust… cant decide if best to bang out n rust proof or how much ballpark this job runs?
Thanks for sharing your knowledge you made it look so easy!!! 🙏 what brand is your grinder? I love the shape here we have old fashioned round disks is time for an upgrade
Very good work, I was expecting a lot of filler and approximations but thats put together almost the same as how it started. I suppose most gaps don't line up perfect the first time though?
Is there another way or a different tool people could use in a home garage to do those pinch welds you did at the end with that press/weld tool? My brother and I will be doing this to a 6th gen civic sedan quarter panel.
I have a 1988 acura integra coupe and im in need to replace the passenger side. What should i expect to pay for something like this in the central valley California area?
Hi I have a 2012 civic lx sedan and my car was rear ended in the same spot as in the video. Will insurance total the car . Also if its repairable do body shop replace the rear quarter panel or try to fix it.
What are those instructions you have printed out at 4:00? Are those available for DIY-ers? Also, is that weld through primer you use at 5:42? And at 7:50, what is the stuff you put on and what’s the purpose?
Hey Kyle, how are you doing? The reason im contacting you is within the coming months I plan on doing the 1m clone on my 135i and will do the purchasing of all body panels including the rear quarter panels. How much would it cost to the the rear panel and painting?
He uses a "band file belt grinder" which is like a belt sander but just a little narrow belt that sticks out. There are also drill bits sold at harbor freight to drill these out. They might have been rivets instead of spot welds though I am not sure.
Hey Kyle whats that grey/tan sealer paint you use for the back of the panels? Im in the middle of getting 2 quarters replaced on my challenger and wanted to have the shop spray them as an extra precaution , thanks man!
Serious question. Is there a reason you didn’t prep it ready to weld before you removed the deck lid and tail lamp? You had all the gaps correct and ready to go.
I would like to see the continued to see all your spray able seem sealers and caulking beats replicated honda quarter's well there not as easy as BMW 😂 gravelgauard on the rocker to that should be 125 hour sheet im hoping they wrote it correctly with all the adjacent panels that are damaged apon removal and installation of welding
I've got a 2009 corrola with rust on the roof near the windshiled, no doubt it's under the windshield where the roof meets it... I need both front and back glass removed and a new roof... its a real pain because I'm only at 70k Miles on it... they quoted me $3000 Cdn for the job... sheesh... but it's a lot of work... so understandable
On average, how much would a project like this cost? i have a passenger quarter panel that suffers from a nasty dent, so spot welding a whole new panel will be the only way to go.
@@jeffarmer4428 dont see the need to primer the inside of new panel since the new panel has factory primer already..I just use weld threw primer on the spots that i cleaned for spot or mig welds..But hey always willing to learn more!!
@@CarsNfish if u ever see cars driving around with the black replacement panels thatve been left unpainted for a year or two and they’re totally rusted through, you’ll see why
@LetMeSeeThis99 I hope you’re just being facetious lmao but yes $3-4k. Depends what shop you go to. Labor rates are about $60-65 and up for body and paint. A quarter panel-bumper job like this pays a good shop 14-15 hrs, plus all the blending required on the rear door roof rail and gutters.
@@drummer_zay9493 what about just the fitting/cutting/welding without the rest of the body and paint work? We have a paint shop, but have never replaced a qtr panel before.
@@tanker242 for this specific car it probably pays 10-12 hours. Times that by $60 and your looking at about $720. I’d say closer to $850 tho after all is said and done, materials cost and otherwise
Dude, been building cars for YEARS but never any REAL bodywork. This was so educational. You confirmed a lot of what I thought. So kool, bro.
This is so fascinating! I'm planning on restoring my car and replacing my quarter pannels. This is very fascinating!
🧢
What car is it?
@@jeskco why are you the way you are
@@jeskco 😂😂
Wow, I had no idea you could do this. This is very impressive! I wish I could quit my white collar job and do this for a living.
You should, techs are desperately needed right now. If you really want to do it, you could be very successful at it
@@BlueCollarKylehow much does that typically cost. Seems like a lot.
@@Mrpyro187 I'm going through a paid apprenticeship right now
@@03tg how do you get started in this ? I’m in Florida I’d appreciate it
@@michaelfrancisjr4319 I mass applied to the apprentice program in my surrounding area. I think they have quite a few calibers in Florida
One of Best instructor when it comes to body work 🤝🏾💯
Thank you!
i was wondering about the backing plate and then... you just saved me from burning through the metal lol
Very meticulous and skilled work my bro. Keep it up.
superb, a genuine artist!
Agreed
superb, a genuine artist! 👌👌👌👌
Looks like you’ve done this many times. Nice job, I’ll have to get a spot welder leaves it cleaner looking ,currently mig welding everything myself but it’s more time consuming
This was an amazing video!! Well done!!
Honda making that into one piece with the upper and lower frame will always and forever be stupid as hell
That is fascinating. Lot of work.
You are my fucking hero for this series of vids. I owe you.
Perfect 👍 fit like a glove!! Just subbed 🥰 thanks for sharing your knowledge and expertise. You make it look so easy. ❤from Diane in Fl
What’s the name of the machine you use and how much cost ?
Dam diz haz 2 be da hardest job. Mostly all da other panel just swap out
No sleeves on Honda Quarter replacement but I love your work. Repair manuals say no sleeves
I need this exact work done on my Honda civic coupe
Where do you get these panels from?
Hey man what setting do you usually use for the metal on cars on your welder?
Great video 👍, how is the quarter panel attached to the inner wheel house ?
Great job
how much would this cost at a shop roughly? Thanks!
We just did this to a 2019 Honda Odyssey. Granted the sliding door had to be replaced and fitted as well, but the repair was roughly $8200 so for this older civic, no door damage. Probably closer to $3800-$4400 depending on the availability of that paint
@@jhenson5168 thank u
thank you! subbed! def needed this info. badly!!!!
What brand belts do use on the spot weld removal tool as I go through them fast????
How much approximately does it cost to replace quarter panel on a car (labor only)?
Great video and info bro!! What type of 3M primer were you using to spray the back of the quarter panel? Thanks bro.
Great video. Why do you put those backer plates? And can i ask u why when i line up the panel and weld it to the rocker
the weld itself closes the gap slightly between the door and the quarter panel. Thank you in advance.
Where you get that lil ruler to measure 40mm?
Location? Great work! clean cut
What about adhesive around the wheelhouse flange?
I was wondering about this too
Curious… ballpark cost on this? My ‘12 civic si coupe has taken a beating of dents n rust… cant decide if best to bang out n rust proof or how much ballpark this job runs?
Thanks for sharing your knowledge you made it look so easy!!! 🙏 what brand is your grinder? I love the shape here we have old fashioned round disks is time for an upgrade
Awesome.... can you help me get a place or website I can get a quarter panel to buy please.
Impressive work. A great skill yo know and how to do. Nicely done
What do you feel estimators miss most on a QP job that would save you time on a blue print?
Hello please where did you order the quarter panel from?
What is the air tool with the wire wheel you use to remove the glue from the panels called
Very good work, I was expecting a lot of filler and approximations but thats put together almost the same as how it started.
I suppose most gaps don't line up perfect the first time though?
Im sure mine wont look anywhere near as good as kyles. But thankful for this video 😅
what size of drill bit did u use i have to do this..
That quarter pannel wasn't that bad
Currently my BMW I having the same side quarter panel changed because of an accident I had
Is there another way or a different tool people could use in a home garage to do those pinch welds you did at the end with that press/weld tool? My brother and I will be doing this to a 6th gen civic sedan quarter panel.
Mig weld.. punch tool and plug weld it if you don’t have a spot welder
I would pay double your labor to have you do a replacement panel on my TSX
I have a 1988 acura integra coupe and im in need to replace the passenger side. What should i expect to pay for something like this in the central valley California area?
Okay now do a coupe
Hahaha 🤣. Tough call on that one.
whats a ballpark price to get this done ?
Hi I have a 2012 civic lx sedan and my car was rear ended in the same spot as in the video. Will insurance total the car . Also if its repairable do body shop replace the rear quarter panel or try to fix it.
This happen to my 04 acura rsx should I fix or scrap it ???
What brand purple sanding paper did you use to cut out the spot welds?
3M 80 grit belts
What paint did you use for behind the panel (Tan) color
Where can I buy a spot or point welder...what's the name?? And the other one you sanded off the welded points...sorry my english isn't that good
what cut off tool do you use?
Damn. You guys have to r&i the entire door and interior including seats? Im working on my first quarter panel replacement estimate right now
Can give me the name for all the tools you used? Thank you
What are those instructions you have printed out at 4:00? Are those available for DIY-ers? Also, is that weld through primer you use at 5:42? And at 7:50, what is the stuff you put on and what’s the purpose?
They are specification insurance prints out so you will cut and weld where they want you to
Hey Kyle, how are you doing? The reason im contacting you is within the coming months I plan on doing the 1m clone on my 135i and will do the purchasing of all body panels including the rear quarter panels. How much would it cost to the the rear panel and painting?
Where can i get the parts
Nice job
Where are you located I need this exactly done to my car
What tool did you use to get rid of the welding points before you took it off ?
He uses a "band file belt grinder" which is like a belt sander but just a little narrow belt that sticks out. There are also drill bits sold at harbor freight to drill these out. They might have been rivets instead of spot welds though I am not sure.
Nice work 👍
🇵🇷🇵🇷🇵🇷🇵🇷🇵🇷
you can work on my car any day...….you are a Pro...Awesome job
Can you please show more when you plug weld and welding two panel as we saw in the end of this video.
How long did it take to finish
Sir, what is the approximate cost for this job? My civic 2014 has same job. I am getting heart attacks for the price.
How much to do something like that. I have the same problem 😢 and I have to pay
How long it takes to paint a quarter panel
Is that windex you use to clean?
Hey Kyle whats that grey/tan sealer paint you use for the back of the panels? Im in the middle of getting 2 quarters replaced on my challenger and wanted to have the shop spray them as an extra precaution , thanks man!
Ecoat restore
what you spray on the inside of the new quarter panel
Where’s your shop located?
5:25 what spray are you using there kyle?
How long did it take you
How is that welder called?
How come you don't use a air hammer
Serious question. Is there a reason you didn’t prep it ready to weld before you removed the deck lid and tail lamp? You had all the gaps correct and ready to go.
Gotta make sure everything's lined up correctly before adding the caulking, incase you gotta remove it and adjust. Cleaner job
I would like to see the continued to see all your spray able seem sealers and caulking beats replicated honda quarter's well there not as easy as BMW 😂 gravelgauard on the rocker to that should be 125 hour sheet im hoping they wrote it correctly with all the adjacent panels that are damaged apon removal and installation of welding
i was scared that hammer was gonna hit his hand
How much would this repair cost? My 08 Accord is having bad rust leading into the door jam and it’s really worrying me
$100,000
I've got a 2009 corrola with rust on the roof near the windshiled, no doubt it's under the windshield where the roof meets it... I need both front and back glass removed and a new roof... its a real pain because I'm only at 70k Miles on it... they quoted me $3000 Cdn for the job... sheesh... but it's a lot of work... so understandable
Hey I got into an accident is there any way I can show you a photo and you give me a quote on damage cost so I have an idea ?
Why you don’t overlap in this job?
Where does he get the instructions
On average, how much would a project like this cost? i have a passenger quarter panel that suffers from a nasty dent, so spot welding a whole new panel will be the only way to go.
3k minimum
@@autobodypaint1746 it also caught the back part of my rear door too, so it’s a nasty, nasty dent
How much does this job cost?
How much does this cost
❤
How much a shop will charge you for that kind of work?
It's around $800 CDN here for my front left ... its mostly labor in costs... and specialized equipment
What type of primer are you using on the inside of the new panel ?
yea i was thinking the same thing
@@CarsNfish I think it's self etching primer .
@@jeffarmer4428 dont see the need to primer the inside of new panel since the new panel has factory primer already..I just use weld threw primer on the spots that i cleaned for spot or mig welds..But hey always willing to learn more!!
Ez primer!
@@CarsNfish if u ever see cars driving around with the black replacement panels thatve been left unpainted for a year or two and they’re totally rusted through, you’ll see why
I need to know the name of those tools lol
The tool at 4:37, what is the name of it?
It’s a long reach pneumatic cut off tool. Harbor freight, my guy.
I feel like I'm at the dentist 😬 😫
How can I work in this?
That was car o liner crs my company.
Can one of you pro’s tell me what that tool is he use to remove seam sealer so fast? Thanks
Wurth tool, snapon has one called a crud thug.. and I know cornwell sells one like it.
How much do people charge for a job like this
Are you in California?
How much does a job like this cost someone?
All in all probably $3-4
@LetMeSeeThis99 I hope you’re just being facetious lmao but yes $3-4k. Depends what shop you go to. Labor rates are about $60-65 and up for body and paint. A quarter panel-bumper job like this pays a good shop 14-15 hrs, plus all the blending required on the rear door roof rail and gutters.
@@drummer_zay9493 what about just the fitting/cutting/welding without the rest of the body and paint work? We have a paint shop, but have never replaced a qtr panel before.
@@tanker242 for this specific car it probably pays 10-12 hours. Times that by $60 and your looking at about $720. I’d say closer to $850 tho after all is said and done, materials cost and otherwise
I had a 2020 civic and they totaled it out because it took a hit in the back l, no air bags deployed
👍👍👍👍👍👍
Bro how much yu spend bro i have the same problem
What are the tools you used in this video ?